The Xtorm Xtreme Power 2 XP2SW200 is a high-capacity, rugged portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. It features a 200W pure sine wave AC output, multiple USB ports (including USB-C PD), DC outputs, a high-lumen LED flashlight, and a durable, water-resistant construction. Below are key sections for safety, features, operation, charging, maintenance, and troubleshooting.
Key components: High-capacity Lithium-ion battery pack, AC outlet, USB-A ports, USB-C Power Delivery port, DC output ports, LED power indicator panel, integrated handle, and LED flashlight.
| Feature | Description |
|---|---|
| AC Output | 200W pure sine wave (230V/50Hz or 120V/60Hz) |
| USB-A Outputs | Two ports (5V/2.4A each) for smartphones and tablets |
| USB-C PD Output | One port (up to 60W) for fast-charging laptops and devices |
| DC Output | 12V/10A car socket port for car appliances |
| DC Input | For recharging via included AC adapter or solar panel (sold separately) |
| LED Flashlight | Integrated with multiple modes (steady, SOS, strobe) |
| Battery Indicator | 4-LED display for remaining battery capacity |
| Power Button | Main switch to turn outputs and flashlight on/off |
| Flashlight Button | Cycles through flashlight modes |
| Overload Protection | Automatic shutdown if power draw exceeds 200W |
Unpack and inspect all items. Contact support if anything is missing.
WARNING! The power station is heavy; lift with care using the integrated handle. Keep packaging away from children.
Fully charge the unit before first use for optimal battery performance.
CAUTION! Use only the provided or approved charging accessories. Charge in a dry, well-ventilated area away from direct sunlight.
Front Panel: POWER button, FLASHLIGHT button, 4-LED battery indicator, output ports.
Battery Indicator LEDs: 4 LEDs indicate approximate charge level (25% per LED). All LEDs solid = 100%.
Power Button: Press once to turn on AC and DC outputs. Press and hold for 2 seconds to turn all outputs off. USB ports may remain active if "Always-On USB" is enabled in settings (if applicable).
Flashlight Button: Press to cycle modes: High > Low > SOS > Strobe > Off.
Status Indicators: LED next to each output port lights up when in use. Flashing indicates error or overload condition.
Ensure the total power draw does not exceed 200W for AC or the port's rated output.
Tip: The pure sine wave AC output is safe for sensitive electronics like medical devices and audio equipment.
Recharge via AC wall outlet, car socket, or compatible solar panel (sold separately).
WARNING! Do not charge in extreme temperatures (below 0°C or above 45°C). Disconnect once fully charged to prolong battery life.
Built-in protections: Overload, over-voltage, over-current, short-circuit, and over-temperature. The unit will automatically shut down the affected output and may flash the status LED. The Battery Management System (BMS) protects the lithium-ion cells.
Store in a cool, dry place. If storing for more than 3 months, charge to 50-60% first. Clean with a dry cloth; do not use liquids.
CAUTION! Do not disassemble. Avoid water immersion (rated IPX4 for splash resistance only). Keep away from metal objects to prevent short circuits.
FCC Part 15: Class B digital device; complies with interference limits for residential use. CE, RoHS compliant. Copyright © 2025 Xtorm; trademarks of Xtorm BV. For support, visit www.xtorm.eu or contact +31 (0)85 273 4996.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit will not turn on | Battery depleted | Connect to AC adapter and charge for 30 minutes before attempting to power on. |
| No output from AC port | Overload triggered | Disconnect all devices, turn unit off and on again. Ensure connected device draws less than 200W. |
| Device charges slowly via USB | Using non-PD port for high-demand device | For fast-charging laptops, use the USB-C PD port. For iPhones/iPads, use a USB-C to Lightning cable. |
| Solar panel not charging | Insufficient sunlight or wrong cable | Ensure panel is in direct sun. Verify cable is MC4 to DC connector (solar input). |
| Battery drains quickly | High-power device connected | A 100W laptop will drain the battery in approx. 5 hours. Check device power consumption. |
| Flashlight not working | Button not pressed correctly | Press the FLASHLIGHT button firmly. If still not working, charge the unit as flashlight relies on main battery. |
Reset: If unit becomes unresponsive, disconnect all devices and charging sources. Press and hold POWER button for 10 seconds to force a reset.
Service: +31 (0)85 273 4996; www.xtorm.eu/support