Xtorm XR2S14 Manual

The Xtorm XR2S14 is a high-performance portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. Featuring a 1500Wh capacity, pure sine wave AC outlets, multiple DC ports (USB-A, USB-C PD, 12V carport), wireless charging pad, solar charging capability, LCD display for monitoring, and a robust lithium-ion battery. It supports pass-through charging, has an integrated handle, and includes safety protections (overload, short circuit, temperature control). Below are key sections for safety, features, setup, operation, specifications, and troubleshooting.

Features at a Glance

Key components: Lithium-ion battery pack, LCD display, AC outlets, DC ports, Wireless charging pad, Solar charging input, Integrated handle, Cooling fan.

Feature	Description
AC Output	2x pure sine wave outlets (120V, 60Hz, 1500W total)
USB-A Ports	2x Quick Charge 3.0 ports (up to 18W each)
USB-C PD Port	1x Power Delivery port (up to 100W)
12V Carport	1x DC output for car accessories
Wireless Charging	Integrated pad (up to 15W for Qi-compatible devices)
Solar Charging Input	Supports up to 200W solar panel (MC4 connector)
LCD Display	Shows battery level, input/output power, remaining time
Cooling Fan	Automatic temperature-controlled ventilation
Pass-Through Charging	Can charge battery while powering devices
Integrated Handle	For easy portability

Installation & Setup

Unpack and inspect contents. Place on stable, dry surface.

1. Initial Charge: Connect included AC adapter to wall outlet and DC input port. Charge fully before first use.
2. Positioning: Ensure at least 10cm clearance around ventilation fans. Keep away from heat sources and moisture.
3. Connecting Solar: Use compatible solar panel with MC4 connector to solar input port.
4. Power On: Press and hold power button for 3 seconds to turn on unit.

WARNING! Unit is heavy (approx. 30 lbs); lift with care using both hands on handle. Ensure proper ventilation during operation.

First-Time Use

Power on unit; monitor LCD display.

1. Check Battery: Ensure battery is at least 50% charged before first use.
2. Connect Devices: Plug devices into appropriate ports (AC, USB, 12V).
3. Monitor Output: LCD shows total output power and estimated runtime.
4. Configure Settings: Use MODE button to cycle through display views (battery %, time remaining, input/output watts).

CAUTION! Do not exceed total 1500W AC output or 12V/10A DC limit. Overload may trigger automatic shutdown.

Specifications

• Capacity: 1500Wh (41.6V, 36Ah lithium-ion).
• AC Output: 120V AC, 60Hz, 1500W (3000W surge).
• DC Output: USB-A QC3.0 (18W max each), USB-C PD (100W max), 12V carport (10A max).
• Wireless Charging: 15W max (Qi standard).
• Input Charging: AC adapter (120V, 60Hz, 180W max), Solar (11-60V DC, 200W max).
• Display: 3.5-inch LCD with backlight.
• Protections: Overload, short circuit, over-temperature, low-voltage automatic shutdown.
• Operating Temp: 32°F to 104°F (0°C to 40°C).
• Weight: 30 lbs (13.6 kg).
• Dimensions: 14.2 x 8.7 x 10.6 inches.

Controls and Display

Front Panel: POWER button, MODE button, LCD display, AC outlets, USB ports, 12V port, wireless charging area.

LCD Display Icons: Battery percentage, Input power (lightning icon), Output power (plug icon), Estimated runtime, Warning indicators (overload, temperature).

Settings: Press MODE to cycle views. Long press MODE (5 seconds) to turn display backlight on/off. Press POWER to turn unit on/off; hold for 3 seconds.

Safety Features: Automatic shutdown if overload, short circuit, or high temperature detected. Fan turns on automatically when needed.

Charging the XR2S14

Supports AC wall charging and solar charging.

1. AC Charging: Use included adapter. Plug into wall outlet and DC input port. Full charge in approx. 8-10 hours.
2. Solar Charging: Connect compatible solar panel (11-60V DC, max 200W) to solar input port. Ensure proper sunlight.
3. Monitoring: LCD shows input power and estimated time to full charge.
4. Pass-Through: Unit can be charged while powering devices (recommended for light loads only).

Tip: For battery longevity, avoid frequent full discharges. Recharge when battery drops below 20%.

Powering Devices

Connect devices to appropriate ports.

1. AC Devices: Plug into AC outlets (max 1500W total). Ensure device power rating is within limit.
2. USB Devices: Use USB-A for phones/tablets; USB-C PD for laptops (up to 100W).
3. 12V Devices: Use carport for coolers, air pumps, etc. (max 10A).
4. Wireless Charging: Place Qi-compatible device on charging pad (center for best alignment).

WARNING! Do not connect high-surge devices (e.g., large motors) that exceed 3000W surge rating. Check device specifications first.

Solar Charging

For off-grid solar charging.

1. Panel Compatibility: Use solar panel with MC4 connector, 11-60V DC open circuit voltage, max 200W.
2. Connection: Plug panel into solar input port. Ensure polarity is correct.
3. Positioning: Angle panel towards sun for maximum efficiency.
4. Monitoring: LCD shows solar input power. Charging may pause if input is too low (e.g., cloudy conditions).

CAUTION! Do not exceed 200W solar input. Use only recommended panels to avoid damage.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only; no liquids.

Battery Care: If storing long-term (>3 months), charge to 60-80% and store in cool location. Recharge every 3 months to maintain battery health.

CAUTION! Do not disassemble unit. No user-serviceable parts inside. Keep away from water and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Xtorm; trademarks of Xtorm Technologies. For support, visit www.xtormpower.com or contact 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Connect to AC charger for at least 30 minutes, then try again.
No output from AC outlets	Overload shutdown	Disconnect devices, wait 1 minute, power on, then reconnect fewer devices.
Solar not charging	Insufficient sunlight/connection	Check solar panel connection; ensure adequate sunlight; verify panel voltage.
LCD display blank	Display sleep mode	Press any button to wake display. If still blank, check battery level.
Fan running continuously	High temperature	Move unit to cooler location; ensure ventilation not blocked.
Wireless charging not working	Device alignment/material	Center device on pad; remove thick cases; ensure device supports Qi.

Reset: Disconnect all devices, turn off unit, wait 2 minutes, then restart.

Service: 1-800-555-0199; www.xtormpower.com