Winees L1 Quick Start Manual

The Winees L1 is a compact and efficient wine preservation system designed to keep your opened wine fresh for longer. It features an argon gas preservation system, easy-to-use controls, LED indicators, and compatibility with most standard wine bottles. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Operation Guide 7. Maintenance & Cleaning 8. Safety Information 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main preservation unit, argon gas cartridge, wine bottle stopper, power adapter, and remote control (if applicable).

Feature	Description
Argon Gas System	Uses inert argon gas to create a protective blanket over wine
LED Status Indicators	Shows power, gas level, and preservation status
Quick-Seal Stopper	Universal silicone stopper fits most wine bottles
Battery/Power Options	Rechargeable battery or AC power operation
Compact Design	Sleek, space-saving unit for countertop or wine cellar
Auto-Shutoff	Preservation cycle completes automatically
Gas Cartridge Indicator	Alerts when cartridge needs replacement
Preservation Timer	Customizable preservation duration settings
Quiet Operation	Minimal noise during gas injection
Portable Use	Battery-powered for flexible placement

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface away from heat sources.

Insert argon gas cartridge: Remove cartridge compartment cover, insert cartridge until it clicks.
Charge battery: Connect power adapter to unit and wall outlet for initial 4-hour charge.
Attach wine stopper: Connect stopper hose to main unit output port.
Power on: Press and hold POWER button for 3 seconds until LED illuminates.

WARNING! Keep away from open flames. Ensure unit is placed on a dry, stable surface.

First-Time Use

Power on unit; follow LED indicator prompts.

Insert stopper: Place silicone stopper firmly into opened wine bottle.
Select preservation mode: Press MODE button to choose preservation duration (3, 7, or 14 days).
Start preservation: Press START button; unit will inject argon gas and seal bottle.
Monitor status: Green LED indicates active preservation; red LED signals low gas.
Remove stopper: Twist gently to break seal when ready to pour.

CAUTION! Do not submerge unit in water. Keep stopper clean between uses.

Specifications

Dimensions: 6.5 x 4.2 x 3.1 inches (165 x 107 x 79 mm).
Weight: 1.1 lbs (500 g) without cartridge.
Power Source: Rechargeable lithium-ion battery (1200mAh) or 5V DC adapter.
Gas Cartridge: Standard 8g argon cartridge (approx. 30-40 uses).
Preservation Time: Up to 14 days per preservation cycle.
Bottle Compatibility: Fits standard 750ml wine bottles (diameter 1.1-1.3 inches).
Operating Temperature: 50°F to 95°F (10°C to 35°C).
Charging Time: 4 hours for full charge.
Battery Life: Up to 60 preservation cycles per charge.

Controls and Indicators

Access functions via front panel buttons. Front Panel: POWER, MODE, START, RESET.

LED Indicators: Power (steady green), Low Gas (flashing red), Preservation Active (pulsing green), Charging (amber), Fully Charged (solid green).

Mode Settings: Press MODE to cycle through 3-day (1 beep), 7-day (2 beeps), 14-day (3 beeps) preservation. Battery: Check level by pressing POWER briefly; green (high), amber (medium), red (low). Reset: Hold RESET for 5 seconds to restore factory settings.

Operation Guide

Daily use for preserving opened wine bottles.

Ensure unit is charged or plugged into power.
Insert clean stopper into wine bottle opening.
Select desired preservation duration with MODE button.
Press START; wait for confirmation beep and green LED.
Store bottle upright in cool, dark place.
When serving, twist stopper gently to release seal.
After pouring, reinsert stopper and press START to reseal.

Tip: For best results, preserve wine immediately after opening. Avoid moving bottle during gas injection.

Maintenance & Cleaning

Unplug and power off before cleaning. Clean stopper after each use.

Stopper cleaning: Rinse with warm water, mild soap; air dry completely.
Unit exterior: Wipe with damp cloth; do not use abrasive cleaners.
Gas cartridge replacement: When red LED flashes, replace cartridge.
Battery care: Charge fully every 3 months if not in regular use.
Storage: Store in cool, dry place with stopper detached.

CAUTION! Do not immerse unit in water. Never use harsh chemicals on stopper.

Safety Information

Read all instructions before use. Keep away from children.

Use only with standard wine bottles; not for carbonated beverages.
Do not use with damaged or leaking bottles.
Keep gas cartridges away from heat and open flames.
If gas cartridge is damaged, do not use; dispose properly.
Consult physician if argon gas is inhaled (though unlikely with proper use).
Do not disassemble unit; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Winees; trademarks of Winees Corporation. For support, visit www.winees.com or contact 1-800-WINEES-1. Gas cartridge disposal: Recycle according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't power on	Battery depleted/no power	Connect to charger for 30 minutes; check power outlet.
Red LED flashing	Low gas cartridge	Replace argon gas cartridge.
No gas injection	Stopper not connected properly	Ensure stopper hose is firmly attached to unit.
Bottle not sealing	Stopper not inserted fully	Push stopper firmly into bottle neck; check for cracks.
Wine tastes oxidized	Preservation time exceeded	Use within recommended preservation period; check cartridge.
Unusual noise	Air in gas line	Run 2-3 quick preservation cycles without bottle to purge.

Reset: Hold POWER and MODE for 10 seconds to reset unit.

Service: 1-800-WINEES-1; www.winees.com/support