Wasserstein Solar Panel for Wyze Cam Outdoor User Manual

The Wasserstein Solar Panel is a weatherproof, high-efficiency solar charging accessory designed for the Wyze Cam Outdoor. It features a durable, IP65-rated construction, adjustable mounting bracket, 6-foot weather-resistant cable, and integrated micro-USB connector. The panel provides continuous solar power to keep your Wyze Cam Outdoor charged, eliminating the need for frequent battery changes or wired power connections. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Positioning for Optimal Performance 7. Maintenance & Care 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Adjustable mounting bracket with ball joint, 6-foot waterproof cable, Integrated micro-USB connector, Weatherproof IP65 rating.

FeatureDescription
Solar PanelMonocrystalline cells for high energy conversion efficiency
Weatherproof RatingIP65 certified for dust and water resistance
Cable Length6-foot (1.8m) weather-resistant cable
ConnectorIntegrated micro-USB for direct connection to Wyze Cam Outdoor
Mounting BracketAdjustable ball joint for optimal sun angle positioning
Installation HardwareIncludes screws, wall anchors, and mounting template
CompatibilityDesigned specifically for Wyze Cam Outdoor (v1 and v2)
Operating Temperature-4°F to 140°F (-20°C to 60°C)
Output5V/1A maximum under optimal sunlight conditions
Dimensions8.3 x 5.9 x 0.6 inches (210 x 150 x 15mm)

Installation

Unpack and inspect contents. Ensure all components are present before installation.

  1. Choose location: Select a spot with maximum direct sunlight exposure throughout the day.
  2. Mount solar panel: Use included screws and wall anchors to secure mounting bracket.
  3. Adjust angle: Loosen ball joint, position panel toward the sun (typically south-facing in northern hemisphere), then tighten.
  4. Connect to camera: Route cable to Wyze Cam Outdoor and plug micro-USB connector into camera's charging port.
  5. Secure cable: Use cable clips (included) to keep cable tidy and protected.

WARNING! Do not install near heat sources or flammable materials. Ensure mounting surface is stable and secure.

First-Time Setup

After installation, verify proper operation.

  1. Check connection: Ensure micro-USB connector is fully inserted into camera's charging port.
  2. Verify charging: In Wyze app, check camera battery status. It should show "Charging" when in sunlight.
  3. Optimal positioning: Monitor battery level over 24 hours; adjust panel angle if charging is insufficient.
  4. Weatherproofing: Ensure all cable connections are protected from direct rain exposure.

CAUTION! Do not bend cable sharply or expose connectors to standing water.

Specifications

Controls and Connections

The solar panel has no active controls. Charging is automatic when sunlight is available.

Connections: Micro-USB connector plugs directly into Wyze Cam Outdoor charging port.

Indicator: No LED indicator on panel. Charging status is shown in Wyze app under camera battery information.

Mounting Adjustments: Ball joint allows 180° horizontal and 90° vertical adjustment for optimal sun tracking.

Positioning for Optimal Performance

For best results, position the solar panel correctly.

  1. Sun exposure: Aim for at least 6-8 hours of direct sunlight daily.
  2. Direction: In northern hemisphere, face panel true south; in southern hemisphere, face true north.
  3. Angle: Adjust tilt angle based on your latitude (approximately equal to your latitude for year-round use).
  4. Clearance: Ensure no shadows from trees, buildings, or other obstructions during peak sun hours.
  5. Seasonal adjustment: Change panel angle seasonally for optimal performance (steeper in winter, shallower in summer).

Tip: Use the Wyze app to monitor battery level and adjust panel position if charging is slow.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Cleaning: Wipe panel surface with soft, damp cloth every 1-2 months to remove dust, dirt, and bird droppings.
  2. Inspection: Check cable and connector for damage every 3 months.
  3. Winter care: Remove snow accumulation promptly to restore charging capability.
  4. Connection check: Ensure micro-USB connection remains secure, especially after severe weather.

CAUTION! Do not use abrasive cleaners or solvents. Do not spray water directly at connectors.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2023 Wasserstein. All trademarks are property of their respective owners. For support, visit www.wasserstein-home.com or contact [email protected].

Troubleshooting

SymptomPossible CauseCorrective Action
Camera not chargingInsufficient sunlightReposition panel for better sun exposure; clean panel surface.
Intermittent chargingLoose connectionCheck micro-USB connection at camera; ensure full insertion.
Battery draining despite solar panelHigh camera usageReduce camera activity (motion detection sensitivity, recording length); ensure panel gets full sun.
No power in bright sunDamaged cable or connectorInspect cable for damage; try different micro-USB cable to test.
Panel not mounting securelyImproper installationUse appropriate anchors for wall type; tighten all screws securely.
Water in connectorWeather exposureEnsure connector is protected from direct rain; dry thoroughly before reconnecting.

Reset: Disconnect solar panel from camera for 30 seconds, then reconnect.

Service: [email protected]; www.wasserstein-home.com

Wasserstein Solar Panel for Wyze Cam Outdoor User Manual © - All Rights Reserved 2025