Wasserstein Solar Panel For Blink XT and Blink XT 2 Cam User Manual

The Wasserstein Solar Panel is a high-efficiency, weatherproof solar charging accessory designed for Blink XT and Blink XT 2 outdoor security cameras. It provides continuous, renewable power to keep your cameras operational without frequent battery changes. Features include a durable, waterproof design (IP65), adjustable mounting bracket, 6-foot weather-resistant cable, and high-conversion solar cells. Compatible exclusively with Blink XT series cameras. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Installation & Mounting 4. Specifications 5. Operation & Charging 6. Maintenance & Care 7. Regulatory & Safety Information 8. Troubleshooting

Features at a Glance

Key components: Solar Panel, Adjustable Mounting Bracket, 6-foot Power Cable, Weatherproof Connector, Mounting Hardware.

Feature	Description
High-Efficiency Solar Cells	Converts sunlight to electrical energy for continuous camera power
Weatherproof Design (IP65)	Protected against dust and water jets; suitable for outdoor use
Adjustable Mounting Bracket	Allows optimal angle adjustment for maximum sun exposure
6-foot Weather-Resistant Cable	Extended length for flexible placement between panel and camera
Secure Connector	Firmly connects to Blink XT/XT2 camera's power port
Universal Compatibility	Designed for Blink XT and Blink XT 2 cameras only
Durable Construction	UV-resistant materials withstand prolonged sun exposure
Plug-and-Play Setup	No tools required for basic connection

Package Contents

Unpack and verify all items are present.

Wasserstein Solar Panel (1 unit)
Adjustable Mounting Bracket (with pivot joint)
6-foot Power Cable with weatherproof connector
Mounting Hardware Kit (screws, wall anchors)
Quick Start Guide

NOTE: Contact support if any item is missing or damaged.

Installation & Mounting

For optimal performance, install in a location with direct sunlight for most of the day.

Choose Location: Select a south-facing spot (Northern Hemisphere) with minimal shading.
Mount Bracket: Use provided screws/anchors to secure bracket to wall, eave, or pole.
Attach Solar Panel: Secure panel to bracket; adjust angle for best sun exposure.
Connect to Camera: Route cable to camera; plug connector firmly into camera's power port.
Secure Cable: Use cable ties (not included) to prevent dangling or tripping hazards.

WARNING! Ensure mounting surface is stable and can support panel weight. Do not install near flammable materials or where water may pool.

Specifications

Model: Wasserstein Solar Panel for Blink XT/XT2
Compatibility: Blink XT, Blink XT 2 Outdoor Cameras
Output: 5V/1A (regulated)
Panel Efficiency: High-conversion monocrystalline cells
Weather Resistance: IP65 rated (dust-tight, protected against water jets)
Cable Length: 6 feet (1.8 meters)
Operating Temperature: -4°F to 140°F (-20°C to 60°C)
Dimensions: Panel: 7.1 x 5.9 x 0.6 inches (180 x 150 x 15 mm)
Weight: 12.3 oz (350 g)

Operation & Charging

Once installed, the solar panel operates automatically.

Automatic Charging: Panel charges camera's internal batteries when sunlight is available.
Battery Status: Monitor battery level via Blink app (should show "Full" or "Charging" under normal conditions).
Low-Light Performance: Charging reduces on cloudy days; panel may not charge at night.
Camera Operation: Camera functions normally; solar power supplements/replaces battery usage.

Tip: For best results, clean panel surface monthly and ensure no shadows fall on it during peak sun hours.

Maintenance & Care

Regular maintenance ensures optimal performance.

Cleaning: Wipe panel with soft, damp cloth to remove dust, pollen, or bird droppings. Do not use abrasive cleaners.
Inspection: Periodically check cable for damage, connector for corrosion, and mounting hardware for tightness.
Winter Care: Snow/ice may reduce output; gently remove buildup. Avoid using sharp tools on panel surface.
Storage: If removing, store in dry, cool place away from direct sunlight.

CAUTION! Do not disassemble panel. Avoid exposing connector to moisture when unplugged.

Regulatory & Safety Information

FCC Compliance: This device complies with Part 15 of FCC rules. Operation is subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. CE/RoHS compliant. Copyright © 2025 Wasserstein. All trademarks belong to their respective owners. For support, visit www.wasserstein-home.com or email [email protected].

Safety Precautions:

Install away from power lines or high-voltage sources.
Do not attempt to repair damaged panel; contact support.
Keep children and pets away during installation.
Ensure connector is fully seated and weather seal is intact.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera not charging	Insufficient sunlight, poor connection	Reposition panel for direct sun; check connector is fully inserted; verify camera power port is clean.
Intermittent power	Loose cable or connector	Secure all connections; inspect cable for damage; ensure weather seal is intact.
Low charging efficiency	Dirty panel, shading, seasonal angle	Clean panel surface; remove obstructions (leaves, etc.); adjust panel angle seasonally.
Blink app shows low battery	High camera usage, extended cloudy weather	Reduce camera activity if possible; consider temporary battery power during prolonged low-light periods.
No power output	Panel defect, cable fault	Test with multimeter (should read ~5V in sun); contact support if no output.

Reset: Disconnect solar panel from camera for 30 seconds, then reconnect.

Service: [email protected]; www.wasserstein-home.com