Wasserstein Solar Panel Compatible with Wyze Video Doorbell Pro User Manual

The Wasserstein Solar Panel is a weatherproof, high-efficiency solar charging accessory designed to provide continuous power to your Wyze Video Doorbell Pro. It features a durable, UV-resistant design with an integrated 6.5-foot cable, IP65 waterproof rating, adjustable mounting bracket, and a high-conversion efficiency monocrystalline solar cell. This guide covers safety, features, installation, operation, maintenance, and troubleshooting to ensure optimal performance and extended battery life for your doorbell.

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Weatherproof housing (IP65), Adjustable mounting bracket, 6.5-foot integrated USB-C cable, Magnetic cable management clip.

Package Contents

Unpack and verify all components are present before installation.

1. Wasserstein Solar Panel (with integrated cable)
2. Adjustable Mounting Bracket
3. Mounting Screws & Wall Anchors
4. Magnetic Cable Management Clip
5. Quick Start Guide
6. Warranty Information Card

NOTE: Contact support if any items are missing or damaged.

Safety Information

Read all safety instructions before installation and use.

1. Electrical Safety: Do not expose panel to open flames or extreme heat sources.
2. Installation Location: Install in a location with direct sunlight for at least 4-6 hours daily.
3. Water Exposure: While IP65 rated, avoid submerging the panel or connector in water.
4. Cable Management: Secure cable to prevent tripping hazards or damage.
5. Cleaning: Disconnect from doorbell before cleaning. Use only soft, dry cloth.

WARNING! Do not attempt to disassemble or modify the solar panel. Keep away from children and pets during installation.

Installation Guide

Follow these steps for proper installation and optimal charging performance.

1. Choose Location: Select a south-facing wall or surface (in Northern Hemisphere) with maximum sun exposure, within 6.5 feet of your Wyze Doorbell Pro.
2. Mount Bracket: Use provided screws and anchors to securely attach the adjustable bracket to the wall. Ensure it is level.
3. Attach Panel: Snap the solar panel onto the bracket. Adjust the angle to face direct sunlight (typically 30-45 degrees).
4. Route Cable: Use the magnetic clip to route the USB-C cable neatly along the wall to your doorbell.
5. Connect to Doorbell: Gently plug the USB-C connector into the charging port on the bottom of your Wyze Video Doorbell Pro.
6. Verify Connection: Ensure the connection is secure and weatherproof. The doorbell should indicate it is receiving external power.

Tip: For best results, clean the solar panel surface periodically to maintain efficiency.

Specifications

• Model: Wasserstein Solar Panel for Wyze Video Doorbell Pro
• Panel Type: High-Efficiency Monocrystalline Silicon
• Output: 5V/1A (5W Max)
• Cable: Integrated 6.5-foot USB-C Cable
• Weatherproof Rating: IP65 (Dust tight, Protected against water jets)
• Housing Material: UV-Resistant ABS Plastic
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Dimensions: Approximately 6.3 x 3.9 x 0.8 inches (160 x 100 x 20 mm)
• Weight: 8.8 oz (250 g)
• Warranty: Limited 1-Year Manufacturer Warranty

Operation & Performance

Once installed, the solar panel operates automatically. It converts sunlight to electrical power to continuously charge your Wyze Doorbell Pro's internal battery.

Optimal Conditions: For maintenance-free operation, ensure the panel receives direct sunlight for 4-6 hours daily. This is typically sufficient to keep the doorbell battery at or near 100% under normal usage patterns (several events per day).

Charging Indicators: Monitor your doorbell's battery level via the Wyze app. A steady or increasing battery percentage indicates successful solar charging. Some panel models may include a small LED that lights up when charging is active.

Seasonal Considerations: Charging efficiency may decrease in winter or during prolonged cloudy periods. The doorbell will still operate from its internal battery, which the solar panel will recharge when sunlight is available.

Maintenance & Cleaning

Regular maintenance ensures peak performance and longevity.

1. Disconnect: Unplug the USB-C cable from the doorbell before cleaning.
2. Clean Panel Surface: Use a soft, dry cloth to wipe away dust, pollen, or bird droppings. For stubborn dirt, lightly dampen the cloth with water only. Do not use chemicals or abrasive cleaners.
3. Inspect Cable & Port: Periodically check the cable and USB-C port for damage or debris. Keep the port clean and dry.
4. Check Mounting: Ensure the bracket and panel remain securely attached, especially after severe weather.

CAUTION! Never use pressurized water, solvents, or harsh detergents. Do not clean while the panel is hot from sun exposure.

Regulatory & Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This equipment has been tested and found to comply with the limits for a Class B digital device. Copyright © 2025 Wasserstein. All trademarks are the property of their respective owners. For technical support or warranty claims, visit www.wasserstein-home.com or contact [email protected].

Troubleshooting

Reset: Disconnect the solar panel from the doorbell for 30 seconds, then reconnect.

Service & Support: [email protected]; www.wasserstein-home.com