Wasserstein Solar Panel Compatible with Logitech Circle 2 User Manual

The Wasserstein Solar Panel is a weatherproof outdoor accessory designed to provide continuous power to your Logitech Circle 2 security camera. It features a high-efficiency monocrystalline solar panel, adjustable mounting bracket, integrated 10-foot weather-resistant cable, and a secure magnetic connection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Adjustable mounting bracket, 10-foot weather-resistant cable, Magnetic power connector, Wall mounting hardware.

Installation

Unpack and inspect contents. Choose optimal location with direct sunlight.

1. Select mounting location: Choose south-facing wall or surface with maximum sun exposure.
2. Mount bracket: Use included hardware to secure bracket to wall or surface.
3. Attach solar panel: Secure panel to bracket using provided screws.
4. Adjust angle: Tilt panel to optimal angle for your geographical location.
5. Route cable: Use cable clips to secure cable along mounting surface.
6. Connect to camera: Attach magnetic connector to Logitech Circle 2 power port.

WARNING! Ensure mounting surface can support panel weight. Avoid shading from trees or structures.

First-Time Setup

Install panel and verify power connection to camera.

1. Position panel: Ensure direct sunlight exposure for at least 6 hours daily.
2. Connect to camera: Attach magnetic connector to Circle 2 camera.
3. Verify connection: Check camera power indicator in Logitech app.
4. Monitor charging: Observe power LED on solar panel (green = charging).
5. Optimize angle: Adjust panel seasonally for maximum sun exposure.

CAUTION! Do not install near flammable materials. Keep connector dry before attachment.

Specifications

• Panel Type: Monocrystalline silicon.
• Maximum Power: 5W at standard test conditions.
• Output Voltage: 5V DC.
• Cable Length: 10 feet (3 meters).
• Weatherproof Rating: IP65 (dust-tight and protected against water jets).
• Dimensions: 8.5 x 6.5 x 0.5 inches (216 x 165 x 13 mm).
• Weight: 1.2 lbs (0.54 kg).
• Operating Temperature: -20°C to 60°C (-4°F to 140°F).
• Storage Temperature: -30°C to 85°C (-22°F to 185°F).
• Compatibility: Logitech Circle 2 (wired and battery versions).

Controls and Settings

No physical controls on panel. Monitoring through Logitech Circle app.

Power Indicator LED: Green = Charging, Red = Low power/not charging, Off = No power.

Camera Power Management: Configure in Logitech Circle app under Power Settings.

Panel Positioning: Adjust bracket for optimal angle (typically latitude angle ±15°).

Seasonal Adjustment: Increase angle in winter, decrease in summer for optimal performance.

Connecting Devices

Compatible only with Logitech Circle 2 cameras.

1. Ensure camera is powered off before connection.
2. Connect magnetic connector to camera's power port.
3. Verify secure connection (audible click).
4. Power on camera through Logitech Circle app.
5. Check power status in app settings.

Tip: Keep connector clean and dry for optimal connection. Route cable away from foot traffic.

Maintenance & Monitoring

Regular maintenance ensures optimal performance.

1. Daily: Check for shading from new obstructions.
2. Weekly: Clean panel surface with soft cloth.
3. Monthly: Inspect cable and connections for damage.
4. Seasonally: Adjust panel angle for sun position changes.
5. Monitor performance: Check camera battery status in app.
6. Weather events: Inspect after severe weather.
7. Winter care: Remove snow accumulation promptly.
8. Cable inspection: Check for animal damage or wear.

WARNING! Do not use abrasive cleaners or high-pressure water on panel.

Power Management

Solar panel provides continuous power in adequate sunlight conditions.

Charging Indicators: Green LED = sufficient sunlight, Red LED = insufficient sunlight.

Battery Backup: Camera uses internal battery when solar power is insufficient.

Optimal Conditions: Direct sunlight, clean panel surface, proper angle adjustment.

Performance Factors: Geographic location, season, weather conditions, panel orientation.

Care & Cleaning

Regular cleaning maintains optimal efficiency.

1. Unplug from camera before cleaning.
2. Use soft, lint-free cloth dampened with water.
3. Gently wipe panel surface to remove dust and debris.
4. Dry completely before reconnecting.
5. Clean cable with dry cloth only.

CAUTION! Never use chemicals, abrasive materials, or high-pressure water. Do not clean when panel is hot.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE certified for European market. RoHS compliant. Copyright © 2023 Wasserstein; all rights reserved. For support, visit www.wasserstein-home.com or contact [email protected]. This device is not intended for use in hazardous locations.

Troubleshooting

Reset: Disconnect from camera for 30 seconds, then reconnect.

Service: [email protected]; www.wasserstein-home.com