The Wasserstein Blink Doorbell Solar Panel is a weather-resistant accessory designed to provide continuous solar charging for your Blink Video Doorbell, eliminating the need for frequent battery changes. It features a high-efficiency monocrystalline solar panel, adjustable mounting bracket, 10-foot weatherproof cable, and easy plug-and-play installation compatible with Blink Video Doorbell (2020 release and later). Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.
Key components: High-efficiency monocrystalline solar panel, Adjustable mounting bracket, 10-foot waterproof cable, Micro-USB connector, Mounting hardware kit.
| Feature | Description |
|---|---|
| Solar Panel | Monocrystalline cell for optimal energy conversion |
| Weather Resistance | IP65 rated for outdoor use in rain, snow, and sun |
| Cable Length | 10-foot cable for flexible placement |
| Connector | Micro-USB plugs directly into Blink Doorbell |
| Mounting Bracket | Adjustable tilt (0-90 degrees) for optimal sun angle |
| Compatibility | Blink Video Doorbell (2020 release and later models) |
| Installation | No wiring required; uses existing doorbell screws |
| Charging Indicator | Doorbell battery icon shows charging status in Blink app |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Warranty | 1-year limited warranty |
Unpack and verify all components are present before installation.
NOTE: Contact support if any items are missing or damaged.
Install in a location with direct sunlight for at least 4-6 hours daily.
WARNING! Ensure mounting surface is stable. Do not install near heat sources or standing water.
Optimal performance requires correct solar panel orientation.
Northern Hemisphere: Face panel true south. Southern Hemisphere: Face panel true north.
Adjust tilt angle seasonally: - Summer: 10-20 degrees from horizontal. - Spring/Fall: 30-40 degrees. - Winter: 50-60 degrees (for higher sun path).
Tip: Use the Blink app battery level as a guide—if level drops, adjust panel for more direct sun.
Once installed, the solar panel operates automatically.
Note: The solar panel is designed to maintain charge, not rapidly recharge a fully depleted battery.
Periodic cleaning ensures maximum efficiency.
CAUTION! Never spray water directly onto connectors. Do not disassemble the panel.
Read all safety instructions before installation and use.
WARNING! Risk of electric shock. Do not open enclosure. Discontinue use if enclosure is damaged.
FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CE/RoHS compliant. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. Copyright © 2023 Wasserstein. All rights reserved. Wasserstein is a registered trademark. For support, visit www.wasserstein-home.com or email [email protected].
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Doorbell not charging | Poor sunlight, dirty panel, loose connection | Clean panel, adjust angle for direct sun, ensure USB is fully plugged in. |
| Battery level dropping | Insufficient daily sun, high doorbell activity | Relocate panel to sunnier spot; reduce motion sensitivity in app. |
| No charging indicator in app | Connection issue, app glitch | Replug USB cable; restart doorbell; update Blink app. |
| Panel damaged by weather | Extreme conditions, physical impact | Discontinue use; contact support for replacement. |
| Cable frayed or cracked | Weather wear, animal damage | Replace cable; do not use electrical tape repair. |
Reset: Unplug solar panel for 30 seconds, then reconnect.
Support: [email protected]; www.wasserstein-home.com