Vini Socompa PRO+ User Manual

The Vini Socompa PRO+ is a high-performance professional audio interface with 24-bit/192kHz audio resolution, 8 analog inputs/outputs, 2 microphone preamps with phantom power, MIDI I/O, USB-C connectivity, standalone operation capability, dedicated monitor control, loopback functionality, and comprehensive software integration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Software Configuration 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main audio unit, USB-C cable, Power adapter, Quick Start Guide, Software download card.

Feature	Description
Audio Resolution	24-bit/192kHz professional conversion
Analog Inputs/Outputs	8 balanced TRS/TS combo jacks
Microphone Preamps	2 XLR/TRS combo with +48V phantom power
MIDI I/O	Standard 5-pin DIN connectors
USB-C Connectivity	High-speed data transfer and bus power
Standalone Operation	Functions as analog mixer without computer
Monitor Control	Dedicated volume knob with dim/mute
Loopback Function	Internal routing for streaming/recording
Direct Monitoring	Zero-latency monitoring with blend control
Software Integration	Compatible with major DAWs and plugins

Installation

Unpack and inspect contents. Place on stable surface near computer.

Connect to computer: Use included USB-C cable to connect to computer port.
Connect power: Plug power adapter into AC outlet and DC jack on unit.
Connect audio devices: Use XLR/TRS cables for microphones/instruments.
Connect monitors: Use balanced TRS cables to studio monitors.
Connect MIDI devices: Use standard MIDI cables to controllers/synthesizers.

WARNING! Ensure proper ventilation; do not block cooling vents. Use included power adapter only.

First-Time Setup

Power on unit; install drivers if required.

Driver installation: Download latest drivers from Vini website for your OS.
Computer recognition: Ensure computer detects device in audio settings.
DAW configuration: Set audio device to Vini Socompa PRO+ in your DAW.
Sample rate/buffer: Configure in control panel for optimal performance.
Test audio: Play audio through each input/output to verify functionality.

CAUTION! Always connect/disconnect cables with power off to prevent damage.

Specifications

Audio Resolution: 24-bit/192kHz AD/DA conversion.
Dynamic Range: 120dB (A-weighted).
THD+N: <0.001% @ 1kHz, +4dBu.
Frequency Response: 20Hz-40kHz (+0/-1dB).
Input Impedance: 10kΩ (line), 2.4kΩ (mic).
Output Impedance: 100Ω (balanced).
Phantom Power: +48V individually switchable.
Power Requirements: 12V DC, 2A or USB-C bus power.
Operating Temperature: 0°C to 40°C (32°F to 104°F).
Dimensions: 245 x 185 x 55mm (9.6" x 7.3" x 2.2").
Weight: 1.2kg (2.6lbs).

Controls and Settings

Front Panel: POWER switch, INPUT GAIN knobs (1-8), MONITOR VOLUME, DIM/MUTE buttons, METER display, DIRECT MONITOR blend.

Rear Panel: USB-C port, DC power input, 8x TRS outputs, 2x XLR/TRS combo inputs, MIDI IN/OUT, word clock I/O.

Software Control: Sample rate selection (44.1-192kHz), buffer size (32-1024 samples), loopback routing, channel linking, phantom power per channel, metering options, MIDI routing, clock source (internal/external).

Connecting Devices

Microphones: XLR to combo jacks (channels 1-2). Instruments: TS/TRS to combo jacks. Monitors: TRS to outputs 1-2. MIDI: Standard cables to IN/OUT.

Turn off power before making connections.
Use balanced cables for long runs to reduce noise.
Enable phantom power only for condenser microphones.
Set appropriate gain levels to avoid clipping.

Tip: Use high-quality cables for optimal audio performance.

Software Configuration

Compatible with Windows 10/11, macOS 10.15+, iOS via USB-C.

Install control panel: Download from Vini website.
DAW setup: Select Vini Socompa PRO+ as audio device.
Create aggregate device (macOS): Combine with other interfaces if needed.
Configure inputs/outputs: Assign channels in DAW preferences.
Set buffer size: Lower for recording (64-128), higher for mixing (256-512).
Enable direct monitoring: For zero-latency monitoring during recording.
Configure loopback: For capturing computer audio with microphone.

WARNING! Keep drivers updated for compatibility and performance.

Advanced Features

Standalone Mode: Functions as 8-channel analog mixer without computer. Loopback: Internal routing for streaming applications. Direct Monitoring: Zero-latency monitoring with blend control. MIDI Clock Sync: Synchronizes with external MIDI devices. Word Clock: For synchronization with multiple digital devices.

Care & Maintenance

Unplug before cleaning. Use dry, lint-free cloth only; avoid liquids. Keep away from heat sources and moisture.

CAUTION! Do not use compressed air on internal components. Store in dry environment when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. RoHS compliant. Copyright © 2024 Vini Audio; all rights reserved. For support, visit www.vini-audio.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection	Check power adapter connection; try different USB-C cable.
Computer not recognizing	Driver/connection	Reinstall drivers; try different USB port; restart computer.
No audio input/output	Settings/connections	Check DAW audio device settings; verify cable connections.
Audio distortion	Gain staging	Reduce input gain; check for clipping in meters.
Latency issues	Buffer size	Reduce buffer size in control panel; enable direct monitoring.
Phantom power not working	Switch/cable	Ensure phantom power enabled in software; check microphone cable.
MIDI not working	Connection/routing	Verify MIDI cable connections; check DAW MIDI routing.

Reset: Hold POWER + MONITOR for 10 seconds to factory reset.

Service: [email protected]; www.vini-audio.com/support