Vageo V-DSC3pro User Manual

The Vageo V-DSC3pro is a professional-grade digital surveillance camera system featuring 4K Ultra HD resolution, advanced night vision up to 100ft, wide dynamic range (WDR), IP67 weatherproof rating, built-in microphone and speaker for two-way audio, motion detection with human/vehicle filtering, microSD card support up to 256GB, ONVIF compliance, and PoE (Power over Ethernet) capability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Configuration 8. Mobile App & Remote Viewing 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 4K CMOS image sensor, IR-cut filter, built-in IR LEDs, microphone, speaker, RJ45 Ethernet port, reset button, microSD card slot.

Feature	Description
4K Ultra HD Resolution	3840x2160 pixels for crystal clear video
Advanced Night Vision	Up to 100ft with built-in IR LEDs
Wide Dynamic Range (WDR)	Balances light in high-contrast scenes
IP67 Weatherproof Rating	Dustproof and waterproof for outdoor use
Two-Way Audio	Built-in microphone and speaker
Motion Detection	With human/vehicle filtering and alerts
MicroSD Card Slot	Supports up to 256GB local storage
PoE (Power over Ethernet)	Single cable for power and data
ONVIF Compliance	Compatible with third-party NVR systems
Mobile App Support	Remote viewing via Vageo Security App

Installation

Unpack and inspect contents. Choose optimal mounting location.

Mount camera: Use included bracket and screws; ensure stable surface.
Connect network: Use Cat5e or higher Ethernet cable to PoE switch/injector.
Power connection: Use PoE (802.3af) or 12V DC power adapter.
Adjust angle: Loosen adjustment screws, aim camera, then tighten.

WARNING! Ensure power is off during installation. Use appropriate weatherproofing for outdoor connections.

First-Time Setup

Power on camera; use Vageo Security App or web interface for initial configuration.

Install microSD card: Insert into slot (optional for local recording).
Connect to network: Camera will obtain IP via DHCP automatically.
Access camera: Use Vageo Security App to scan QR code or enter IP manually.
Set admin password: Create strong password during first login.
Configure basic settings: Date/time, video quality, motion detection zones.

CAUTION! Mount camera at least 8 feet high for optimal coverage and security.

Specifications

Image Sensor: 1/2.8" 4K CMOS.
Resolution: 3840x2160 @ 15fps, 2688x1520 @ 20fps, 1920x1080 @ 30fps.
Lens: 4mm fixed lens (2.8mm/6mm optional), F1.6 aperture.
Night Vision: Built-in IR LEDs, range up to 100ft.
Audio: Two-way with noise cancellation.
Storage: MicroSD card up to 256GB, NAS, cloud (subscription).
Network: 10/100M Ethernet, IEEE 802.3af PoE.
Weatherproof: IP67 rated.
Operating Temp: -22°F to 140°F (-30°C to 60°C).
Power Supply: 12V DC, 1A or PoE (802.3af).

Controls and Settings

Physical controls: Reset button (hold 10 seconds to restore defaults).

Web Interface: Access via browser at camera's IP address. Settings include: Video (resolution, frame rate, bitrate), Audio (volume, noise reduction), Motion Detection (sensitivity, zones, scheduling), Network (IP, port, DDNS), Storage (microSD, NAS), System (password, firmware update).

Mobile App: Vageo Security App for live view, playback, alerts, two-way talk.

Connecting Devices

PoE Switch: Connect Ethernet cable for power and data. NVR: Compatible with ONVIF-conformant recorders. Router: For internet access and remote viewing.

Ensure all devices are powered off before connecting.
Use quality Ethernet cables (Cat5e or higher).
For 12V DC power, use included adapter and ensure polarity is correct.
Connect to router for network access and remote capabilities.

Tip: Label cables for easy identification during maintenance.

Network Configuration

Supports static IP, DHCP, PPPoE, and DDNS.

Access web interface: Enter camera IP in browser (default: DHCP assigned).
Network settings: Configure IP address, subnet mask, gateway, DNS.
Port forwarding: Set up on router for remote access (default HTTP port: 80).
DDNS setup: Register with service and enter credentials in camera.
Email alerts: Configure SMTP settings for motion detection notifications.

WARNING! Change default password immediately. Use strong passwords for security.

Mobile App & Remote Viewing

Vageo Security App available for iOS and Android.

Download app from App Store or Google Play.
Create account and log in.
Add camera: Scan QR code on camera or enter UID manually.
Live view: Tap camera thumbnail to view real-time video.
Playback: Access recorded footage from microSD or cloud.
Alerts: Receive push notifications for motion events.
Two-way talk: Press and hold talk button to communicate.

Note: Ensure camera is connected to internet for remote viewing.

Care & Maintenance

Regular maintenance ensures optimal performance.

Lens cleaning: Use soft, lint-free cloth; avoid abrasive materials.
Housing cleaning: Wipe with damp cloth; do not use harsh chemicals.
Check connections: Ensure cables are secure and weatherproof seals intact.
Firmware updates: Regularly check for and install updates via web interface.

CAUTION! Disconnect power before cleaning. Do not open housing as it voids warranty.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian EMI regulations. CE: Conforms to European safety and EMC directives. IP67 certified per IEC 60529. Copyright © 2025 Vageo Technologies; all trademarks property of their respective owners. For support, visit www.vageotech.com or contact 1-800-555-VIDEO.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No video image	Power/connection issues	Check power supply and Ethernet cable; ensure PoE switch is working.
Cannot access remotely	Network/port forwarding	Verify internet connection; check router port forwarding settings.
Poor night vision	Lens obstruction/IR reflection	Clean lens; ensure no reflective surfaces within IR range.
Motion alerts not working	Settings/app configuration	Enable motion detection in settings; check app notification permissions.
SD card not recognized	Card format/compatibility	Format card to FAT32/exFAT; ensure card is Class 10 or higher.
Audio issues	Microphone/speaker settings	Check audio settings in web interface; ensure two-way audio is enabled.

Reset: Press and hold reset button for 10 seconds to restore factory defaults.

Service: 1-800-555-VIDEO; www.vageotech.com/support