Utepo UPSP200-2 Quick Installation Manual
The Utepo UPSP200-2 is a 200VA Uninterruptible Power Supply (UPS) designed to provide backup power and surge protection for connected devices. It features automatic voltage regulation (AVR), battery backup, surge protection, audible alarms, and USB connectivity for monitoring. Below are key sections for safety, unpacking, installation, operation, and troubleshooting.
Package Contents
Before installation, verify all components are present.
| Item | Description |
|---|
| UPSP200-2 UPS Unit | Main uninterruptible power supply |
| Power Cord | For connecting UPS to AC outlet |
| User Manual | This quick installation guide |
| USB Cable | For connecting to computer (optional monitoring) |
| Warranty Card | Product warranty information |
Safety Precautions
Read all safety instructions before installation and operation.
- Place UPS on a stable, dry surface away from heat sources and liquids.
- Ensure proper ventilation; do not block vents.
- Connect only to a grounded AC outlet (120V, 60Hz).
- Do not open the UPS casing; no user-serviceable parts inside.
- Do not connect laser printers, copiers, or other high-power devices to battery backup outlets.
WARNING! Risk of electric shock. Disconnect from power before cleaning or servicing. Battery replacement must be performed by qualified personnel.
Front Panel & Indicators
The front panel provides status LEDs and controls.
| Indicator/Button | Function |
|---|
| POWER Button | Turns UPS on/off |
| AC/Line LED (Green) | Lit when connected to AC power |
| Battery LED (Yellow) | Lit during battery operation; flashes when battery low |
| Overload/Fault LED (Red) | Lit when overload or fault condition detected |
| Alarm Silence Button | Press to mute audible alarm temporarily |
Rear Panel Connections
Connect devices to appropriate outlets.
- Battery Backup Outlets (4): Provide surge protection and battery backup.
- Surge-Only Outlets (2): Provide surge protection only (no battery backup).
- Input AC Plug: Connect supplied power cord here.
- USB Port: For connecting to computer for power management software.
- Circuit Breaker: Resettable overload protection switch.
Tip: Connect critical devices (computer, modem, router) to battery backup outlets.
Installation Steps
Follow these steps for proper installation.
- Unpack and inspect UPS for damage.
- Place UPS near equipment to be protected, ensuring adequate ventilation.
- Connect the UPS power cord to the rear input plug, then plug into a grounded wall outlet.
- Connect your devices (computer, monitor, etc.) to the appropriate UPS outlets.
- For monitoring, connect the USB cable from the UPS to your computer (optional).
- Press the POWER button on the front panel to turn on the UPS.
CAUTION! Do not exceed the maximum load capacity (200VA/120W).
Initial Setup & Operation
After installation, allow battery to charge fully.
- With UPS connected to AC power and turned on, the battery will charge automatically (requires 8 hours for full charge from empty).
- Observe front panel LEDs: AC/Line LED should be solid green.
- Test battery operation by unplugging the UPS from the wall outlet. Connected devices should remain powered, and the Battery LED will illuminate.
- Restore AC power; the UPS will return to normal operation and resume charging.
- Install power management software from the manufacturer's website (using USB connection) for advanced features like automatic shutdown.
Note: The UPS emits audible alarms during battery operation and low battery conditions.
Specifications
- Capacity: 200VA / 120W
- Input Voltage: 120V AC, 60Hz
- Output Voltage: 120V AC, 60Hz (simulated sine wave during battery mode)
- Battery Type: Sealed lead-acid (maintenance-free)
- Backup Time: Varies by load (e.g., ~10 minutes at 50% load)
- Outlets: 4 Battery Backup + Surge Protection, 2 Surge Protection Only
- Communications: USB port
- Dimensions: Standard desktop size
- Weight: Approx. 10 lbs (4.5 kg)
Maintenance
Proper maintenance ensures optimal performance and longevity.
- Keep UPS in a cool, dry environment (operating temperature 32°F to 104°F / 0°C to 40°C).
- Periodically test battery by performing a simulated power outage test (unplug from wall).
- If the battery LED flashes rapidly or the unit fails a test, the battery may need replacement.
- Clean exterior with a dry cloth; do not use liquids or aerosols.
- Do not store the UPS in a discharged state for extended periods.
WARNING! Battery replacement must be done by qualified service personnel. Do not disassemble.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| UPS does not turn on | No AC power / Faulty outlet | Check wall outlet; ensure power cord is securely connected at both ends. |
| Continuous beeping | Battery low or overload | Reduce connected load; recharge UPS by leaving plugged into AC power. |
| Overload/Fault LED lit | Connected load exceeds capacity | Disconnect some devices; press circuit breaker button on rear panel. |
| Short backup time | Battery old or not fully charged | Allow 8+ hours for full charge; replace battery if performance is poor after charging. |
| USB not recognized | Driver/software issue | Install power management software from manufacturer's website; try different USB port. |
Reset: Turn UPS off, disconnect from AC power and all devices for 5 minutes, then reconnect and power on.
Warranty & Support
Utepo UPSP200-2 is covered by a limited warranty. For technical support or warranty service:
- Visit: www.utepo-power.com/support
- Call: 1-800-555-UTEPO (1-800-555-8837)
- Email: [email protected]
Retain your sales receipt for warranty validation. This product complies with FCC Part 15 Class B limits.
Utepo UPSP200-2 Quick Installation Manual © - All Rights Reserved 2025