Unv SLP-100W-A Quick Manual

The Unv SLP-100W-A is a high-performance LED security light with motion sensor, designed for outdoor use. It features a 100W equivalent LED output, adjustable motion detection range, dusk-to-dawn operation, weatherproof IP65 rating, and multiple mounting options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, PIR motion sensor, adjustable mounting bracket, weatherproof housing, and power input terminal.

Feature	Description
LED Panel	100W equivalent, energy-efficient LED array
Motion Sensor	PIR sensor with adjustable range (up to 30 feet)
Detection Angle	180-degree horizontal coverage
Light Duration	Adjustable (10 seconds to 30 minutes)
Dusk-to-Dawn Sensor	Automatically activates at night
Weatherproof Rating	IP65 rated for outdoor use
Mounting Bracket	Adjustable for wall or ceiling mounting
Power Input	120V AC, 60Hz
Operating Temperature	-20°C to 40°C (-4°F to 104°F)
Warranty	3-year limited warranty

Installation

Unpack and inspect contents. Ensure all parts are present before installation.

Choose mounting location: Select a stable surface with clear detection area.
Mount bracket: Use provided screws to secure mounting bracket to wall or ceiling.
Attach light fixture: Hang light on bracket and secure with locking nut.
Connect power: Turn off power at circuit breaker before wiring.
Wire connections: Connect black wire to hot, white wire to neutral, green wire to ground.

WARNING! Always turn off power at circuit breaker before installation. Use appropriate safety equipment.

First-Time Setup

After installation, configure settings for optimal performance.

Power on: Restore power at circuit breaker.
Test motion sensor: Walk within detection zone to trigger light.
Adjust sensor range: Use sensitivity dial to set detection distance.
Set light duration: Adjust timer dial for desired illumination period.
Configure dusk-to-dawn: Ensure light only operates in darkness.
Angle adjustment: Tilt light head for optimal coverage area.

CAUTION! Do not look directly at LED light when testing. Use ladder safely during adjustments.

Specifications

Power Consumption: 15W (100W equivalent)
Lumen Output: 1500 lumens
Color Temperature: 5000K (Daylight White)
Motion Detection Range: Up to 30 feet (adjustable)
Detection Angle: 180 degrees horizontal
Light Duration: 10 sec to 30 min (adjustable)
Sensor Type: PIR (Passive Infrared)
Weatherproof Rating: IP65
Operating Voltage: 120V AC, 60Hz
Dimensions: 12" x 8" x 4"
Weight: 3.5 lbs
Warranty: 3 years

Controls and Settings

All controls are located on the bottom of the light housing.

Adjustment Dials:

SENSITIVITY: Controls motion detection range (MIN to MAX)
TIME: Sets how long light stays on after detection (10s to 30min)
LUX: Adjusts ambient light threshold for dusk-to-dawn operation

Operation Modes:

AUTO: Motion-activated with dusk-to-dawn sensor
TEST: Light stays on for 5 seconds when motion detected (day or night)
ON: Light remains on continuously
OFF: Light remains off (overrides all sensors)

Connecting to Power

Proper electrical connection is essential for safe operation.

Turn off power at main circuit breaker.
Remove existing fixture if replacing.
Connect wires: Black to hot (line), White to neutral, Green to ground.
Secure connections with wire nuts.
Tuck wires into junction box.
Attach light fixture to mounting bracket.
Restore power and test operation.

Tip: Use waterproof wire connectors for outdoor installations.

Operation Modes

The SLP-100W-A offers multiple operation modes for different needs.

AUTO Mode: Default setting. Light activates only when motion is detected AND ambient light is below threshold.
TEST Mode: Used for setup and troubleshooting. Light activates with motion regardless of ambient light.
ON Mode: Light remains on continuously. Useful for area lighting without motion detection.
OFF Mode: Completely disables light. Use for maintenance or when not needed.

WARNING! Do not operate in TEST mode for extended periods as it will activate during daylight.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Monthly: Clean lens with soft, dry cloth.
Quarterly: Check mounting hardware for tightness.
Bi-annually: Clean sensor window with mild soap solution.
Annually: Inspect wiring connections for corrosion.

CAUTION! Always turn off power before cleaning or maintenance. Do not use abrasive cleaners.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for outdoor wet locations. CE certified for European standards. Copyright © 2023 Unv Security Systems. For support, visit www.unv-security.com or contact 1-800-555-UNV1.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light not turning on	Power supply issue	Check circuit breaker; verify wiring connections; test outlet.
Motion sensor not working	Obstructions or settings	Clear detection area; adjust sensitivity dial; check mode setting.
Light stays on continuously	Mode setting or sensor	Switch from ON to AUTO mode; clean sensor; adjust LUX dial.
Light turns on during day	LUX setting too high	Adjust LUX dial to require darker conditions.
Short illumination time	TIME setting too low	Adjust TIME dial to longer duration.
Reduced detection range	Dirty sensor or low sensitivity	Clean sensor window; increase sensitivity setting.

Reset: Turn power off for 30 seconds, then restore to reset all settings to default.

Service: 1-800-555-UNV1; www.unv-security.com/support