Togo Power TSP-60F User Manual

The Togo Power TSP-60F is a 60W portable power station designed for outdoor, emergency, and mobile power needs. It features a 156Wh lithium-ion battery, multiple output ports (AC, DC, USB), pure sine wave AC inverter, LCD screen for status monitoring, solar charging capability, and built-in safety protections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging the Unit 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable power station with LCD display, AC output port, DC output ports, USB ports, charging input, and carrying handle.

Feature	Description
AC Output	Pure sine wave 60W output (110V, 60Hz)
DC Output	12V/10A car port for DC devices
USB Ports	Two USB-A (5V/2.4A) and one USB-C (PD 18W)
LCD Display	Shows battery level, input/output power, and warnings
Solar Charging Input	Supports solar panel charging (12-24V, max 60W)
Wall Charging Input	AC adapter input (100-240V, 50/60Hz)
Car Charging Input	12V car charger input
Battery Capacity	156Wh lithium-ion battery
Safety Protections	Overload, short circuit, over-temperature, low voltage protection
Carrying Handle	Integrated handle for portability

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to charging port and wall outlet.
Connect devices: Use appropriate ports for your devices (AC, DC, USB).
Solar setup: Connect compatible solar panel to solar input port (optional).
Car charging: Connect to 12V car outlet using car charger cable (optional).

WARNING! Keep away from water and extreme temperatures. Do not disassemble.

First-Time Setup

Power on unit; check LCD display.

Initial Charge: Fully charge before first use (approx. 5-6 hours via AC).
Power On: Press and hold power button for 2 seconds.
Check Display: Verify battery level and output status on LCD.
Test Outputs: Connect a small device to each port to ensure functionality.

CAUTION! Use only included or approved accessories. Do not exceed rated power.

Specifications

Battery Capacity: 156Wh (14.4V, 10800mAh).
AC Output: 60W continuous, 120W peak (110V, 60Hz).
DC Output: 12V/10A (max 120W).
USB Output: USB-A: 5V/2.4A each; USB-C: 5V/3A, 9V/2A, 12V/1.5A.
Input: AC: 100-240V, 50/60Hz; Solar: 12-24V, 60W max; Car: 12V.
Charging Time: AC: 5-6 hours; Solar: 8-10 hours (with 60W panel).
Display: LCD with battery level, input/output power indicators.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Weight: 3.3 lbs (1.5 kg).
Dimensions: 7.5 x 4.5 x 4.5 inches (190 x 114 x 114 mm).

Controls and Settings

Front Panel: Power button, LCD display, output ports. LCD shows: battery percentage, input/output power, warning icons.

Button Functions: Power (press 2 sec to turn on/off).

Output Control: AC and DC outputs can be turned on/off via power button or automatically when device connected. Display Settings: No user adjustment; automatic status display. Safety Settings: Built-in protections activate automatically.

Connecting Devices

AC Devices: Plug into AC outlet (max 60W). DC Devices: Use 12V car port (max 120W). USB Devices: Connect to USB-A or USB-C ports.

Check device power requirements (do not exceed 60W total for AC).
Connect device to appropriate port.
Power on device; unit will automatically supply power.
Monitor LCD for battery level and load.

Tip: For multiple devices, calculate total wattage to avoid overload.

Charging the Unit

Supports AC wall charging, solar charging, and car charging.

AC Charging: Connect AC adapter to charging port and wall outlet.
Solar Charging: Connect compatible solar panel to solar input (12-24V, max 60W).
Car Charging: Connect to 12V car outlet using car charger cable.
Charging Status: LCD shows charging icon and battery level increasing.
Full Charge: Charging stops automatically when battery reaches 100%.

WARNING! Use only approved solar panels. Do not charge in extreme temperatures.

Safety Features

Overload Protection: Automatically shuts off output if exceeded. Short Circuit Protection: Cuts power during short circuit. Over-Temperature Protection: Reduces output or shuts down if overheated. Low Voltage Protection: Shuts off when battery below safe level.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only; do not use liquids.

CAUTION! Do not expose to water, fire, or extreme temperatures. Recharge every 3 months if storing long-term.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Togo Power; trademarks of Togo Power Inc. For support, visit www.togopower.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Charge unit fully; press and hold power button.
No output power	Overload protection	Disconnect devices; wait 30 seconds; reconnect lower wattage device.
Slow charging	Low input power	Use proper AC adapter; ensure solar panel in direct sunlight.
LCD not displaying	Unit off or faulty	Charge unit; if persists, contact support.
Overheating	High load or hot environment	Reduce load; move to cooler location; allow to cool.

Reset: Disconnect all devices, charge fully, then restart.

Service: 1-800-555-1234; www.togopower.com