Tiemme SOLAR BOX-200 Manual

The Tiemme SOLAR BOX-200 is a portable solar power station designed for off-grid energy needs, featuring a 200Wh lithium battery, multiple AC/DC/USB outputs, MPPT solar charge controller, LCD display for system status, and compatibility with solar panel input up to 100W. Ideal for camping, emergencies, and outdoor activities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, LCD status panel, Solar input port, AC outlets, DC output ports, USB-A & USB-C ports, Charge controller, Carrying handle.

Feature	Description
Battery Capacity	200Wh Lithium-ion
Solar Input	DC 12-24V, max 100W via MPPT controller
AC Output	2 x 110V AC outlets (200W total)
DC Output	12V car port & 5.5mm DC jack
USB Ports	2 x USB-A (5V/2.4A), 1 x USB-C (PD 18W)
LCD Display	Shows battery level, input/output power, status
Charge Controller	MPPT for efficient solar charging
Carrying Handle	Integrated for portability
Overload Protection	Automatic shutdown on overload
Low-Temp Protection	Prevents charging below 0°C (32°F)

Installation

Unpack and inspect contents. Place on stable, dry surface.

Connect solar panel: Use provided cable to connect panel to SOLAR INPUT port.
Connect AC devices: Plug into AC outlets (max 200W total).
Connect DC devices: Use 12V car port or DC jack for compatible devices.
Connect USB devices: Plug into USB-A or USB-C ports.
Charge unit: Use included AC adapter or solar panel.

WARNING! Keep away from water and extreme heat. Do not disassemble unit.

First-Time Setup

Power on unit; check LCD display.

Initial charge: Fully charge using AC adapter before first use.
Check battery level: Press power button; LCD shows remaining capacity.
Set output mode: Press MODE button to select AC/DC/USB output priority.
Connect solar panel: Ensure proper alignment and connection for charging.
Test outputs: Connect a small device to verify operation.

CAUTION! Use only compatible solar panels and cables. Avoid short circuits.

Specifications

Battery Type: Lithium-ion, 200Wh.
Solar Input: 12-24V DC, 100W max, MPPT controller.
AC Output: 110V, 60Hz, 200W continuous (400W surge).
DC Output: 12V/10A (car port), 12V/5A (DC jack).
USB Output: USB-A: 5V/2.4A each; USB-C: 5V/3A, 9V/2A, 12V/1.5A.
Charging Time: AC: ~5 hours; Solar: 6-8 hours (depending on panel).
Display: LCD with battery level, input/output power, error codes.
Operating Temp: -10°C to 40°C (14°F to 104°F).
Weight: 4.5 kg (9.9 lbs).
Dimensions: 28 x 18 x 22 cm (11 x 7 x 8.7 inches).

Controls and Settings

Front Panel: POWER button, MODE button, LCD display, Output ports.

LCD Icons: Battery level, Solar input, AC output, DC output, USB output, Warning indicators.

Power Management: Press POWER to turn on/off; hold for 3 seconds to force shutdown. Mode Selection: Press MODE to cycle through output priority (AC first, DC first, USB first). Display: Shows real-time input/output power, estimated runtime, error codes. Settings: No user-adjustable settings beyond mode selection.

Connecting Devices

Solar Panel: SOLAR INPUT port. AC Devices: AC outlets. DC Devices: 12V car port or DC jack. USB Devices: USB-A or USB-C ports.

Ensure unit is powered on.
Check device power requirements do not exceed port limits.
Connect device to appropriate port.
Monitor LCD for output status and battery level.

Tip: For high-power AC devices, ensure total load is under 200W to avoid overload.

Charging & Power Management

Supports AC charging, solar charging, and car charging (with optional adapter).

AC Charging: Plug AC adapter into unit and wall outlet.
Solar Charging: Connect compatible solar panel to SOLAR INPUT.
Car Charging: Use 12V car charger adapter (not included).
Charging Status: LCD shows input power and estimated time to full.
Battery Care: Avoid full discharges; recharge when below 20%.
Storage: Store at 50% charge in cool, dry place if not used for extended periods.

WARNING! Do not charge with damaged cables or panels. Use only provided or certified accessories.

Safety Features

Overload Protection: Automatically shuts off output if exceeded. Short Circuit Protection: Cuts power on short circuit. Over-Temperature Protection: Reduces output or shuts down if overheated. Low-Temperature Protection: Prevents charging below 0°C (32°F). Battery Management System (BMS): Monitors cell voltage and temperature.

Care & Maintenance

Keep unit clean and dry. Wipe with dry cloth; do not use liquids. Store in cool, dry place away from direct sunlight. Check connections periodically for corrosion or damage.

CAUTION! Do not expose to rain or immerse in water. Do not attempt to open or repair unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2023 Tiemme Energy Solutions; trademarks of Tiemme Group. For support, visit www.tiemmeenergy.com or contact 1-800-555-0123.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	Battery depleted	Charge using AC adapter or solar panel.
No output from ports	Overload protection triggered	Disconnect devices, wait 30 seconds, restart unit.
Solar not charging	Poor sunlight/connection	Ensure proper panel alignment and secure cable connection.
LCD showing error code	Various faults	Refer to manual error code list; reset unit if needed.
Reduced runtime	Battery aging/cold temp	Allow unit to warm to room temp; consider battery replacement if old.

Reset: Hold POWER for 10 seconds to force reset.

Service: 1-800-555-0123; www.tiemmeenergy.com