Tie Down TranzSporter 48469 OwnerS Manual

The Tie Down TranzSporter 48469 is a versatile and durable motorcycle/ATV carrier designed for safe and secure transportation. It features a heavy-duty steel construction, integrated loading ramp, multiple tie-down points, a 400 lb load capacity, and a universal mounting system compatible with most Class III and IV trailer hitches. Below are key sections covering safety, features, installation, operation, maintenance, and warranty information.

Features at a Glance

Key components: Main carrier frame, Integrated loading ramp, Hitch receiver tube, Safety chains, Tie-down anchor points, Pivot mechanism for loading.

Installation & Mounting

Unpack all parts and inspect for damage. Ensure you have the correct hitch class.

1. Prepare Hitch Receiver: Clean the 2-inch hitch receiver on your vehicle.
2. Insert Carrier: Slide the TranzSporter's hitch tube fully into the vehicle's receiver.
3. Secure with Pin: Insert the provided hitch pin through the aligned holes and secure with clip.
4. Attach Safety Chains: Connect the carrier's safety chains to your vehicle's chain loops.
5. Attach Ramp: Secure the loading ramp to the front of the carrier using the quick-release pins.
6. Final Check: Ensure all connections are tight and the carrier does not wobble excessively.

WARNING! Carrier is heavy; use proper lifting techniques or assistance. Ensure hitch and vehicle are rated for the combined load.

Loading & Securing Your Vehicle

Always load on a flat, stable surface with ample clearance.

1. Position Vehicle: Park tow vehicle and carrier on level ground. Engage parking brake.
2. Deploy Ramp: Lower the integrated ramp to the ground, ensuring it is fully seated.
3. Load Motorcycle/ATV: Carefully ride or push the vehicle up the ramp onto the carrier deck. Use an assistant if needed.
4. Center Vehicle: Position the vehicle so its weight is centered over the carrier frame.
5. Secure with Tie-Downs: Use high-quality ratchet straps or cam buckle straps. Attach to the vehicle's frame or designated hard points—not plastic or suspension components. Connect to all four D-rings on the carrier, creating an "X" pattern for stability.
6. Check Security: Firmly tug on all straps. The vehicle should not shift or bounce.
7. Stow Ramp: Secure the ramp in the upright travel position.

CAUTION! Never exceed the 400 lb load capacity. Always wear protective gear during loading.

Specifications

• Model: TranzSporter 48469
• Load Capacity: 400 lbs
• Hitch Compatibility: 2-inch Class III / IV receiver
• Construction: Powder-coated steel
• Deck Length: 72 inches
• Deck Width: 12 inches
• Ramp Length: 70 inches
• Weight (Carrier): 58 lbs
• Included Hardware: Hitch pin & clip, Safety chains, Quick-release pins
• Warranty: Limited 1-year warranty

Parts List & Diagram

Refer to the included diagram for part identification.

Main Parts: A) Main Carrier Frame, B) Hitch Receiver Tube, C) Loading Ramp, D) Ramp Hinge Pins (2), E) Hitch Pin & Clip, F) Safety Chains (2), G) Tie-Down D-Rings (4), H) Reflective Decals.

Ensure all parts are present before assembly. Contact customer service for missing components.

Operation Guidelines

Access OSD via TV MENU or SETUP (DVD). Front Panel: POWER, OPEN/CLOSE, AUTO/DPMS, MUTE.

Before Towing: Double-check hitch pin, safety chains, tie-downs, and load security. Ensure vehicle lights and license plate are not obstructed.

During Transport: Drive cautiously, allowing for increased length and weight. Avoid sudden stops or sharp turns. Periodically stop in a safe location to re-check the load and carrier security.

Unloading: Park on level ground, engage parking brake. Release tie-downs, deploy ramp, and carefully guide the vehicle down the ramp.

Maintenance & Care

Regular maintenance ensures longevity and safety.

1. After each use, inspect for cracks, bends, or rust, especially at weld points.
2. Lubricate the hitch tube and pivot points with a light machine oil periodically.
3. Clean with mild soap and water. Do not use abrasive cleaners on the powder coat.
4. Tighten any loose bolts or hardware.
5. Store in a dry place to prevent corrosion.

Tip: Check the tightness of all bolts and pins before every use.

Safety Warnings

Failure to follow these warnings can result in serious injury, death, or property damage.

• NEVER exceed the 400 lb weight limit.
• ALWAYS secure the carrier with the hitch pin AND safety chains.
• ALWAYS use at least four high-quality tie-downs rated for your load.
• NEVER attach tie-downs to handlebars, plastic fairings, or suspension forks alone.
• ALWAYS load and unload on a flat, stable surface with the tow vehicle's parking brake engaged.
• NEVER allow riders on the carrier during transport.
• ALWAYS check local laws regarding obscured license plates and lighting.
• NEVER modify the carrier's structure or welds.

Warranty Information

Tie Down Engineering warrants the TranzSporter 48469 to be free from defects in materials and workmanship for a period of one (1) year from the date of original retail purchase. This warranty covers repair or replacement of defective parts at Tie Down's discretion. It does not cover damage from misuse, overload, improper installation, accident, neglect, or normal wear and tear. Proof of purchase is required. For warranty service, contact Tie Down Engineering Customer Service.

Troubleshooting

Service: For technical support or parts, contact Tie Down Engineering at 1-800-348-4777 or visit www.tiedown.com.