The Solar Trader 06003FX03 Instruction Manual

The Solar Trader 06003FX03 is a high-efficiency solar power trading inverter designed for residential and small commercial applications. It features MPPT solar charge control, grid-tie functionality with feed-in capability, battery backup support, remote monitoring via Wi-Fi/Bluetooth, multiple safety protections, and an intuitive LCD interface. Operating on 120V/240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: MPPT Solar Charge Controller, Grid-Tie Inverter, Battery Management System, LCD Display, Remote Communication Module, AC/DC terminals.

Installation

Unpack and inspect contents. Mount on a stable, vertical surface in a well-ventilated area.

1. Connect Solar Panels: Ensure PV array voltage matches inverter specs. Connect positive/negative to DC INPUT terminals.
2. Connect Batteries: If using backup, connect battery bank to BATTERY terminals observing correct polarity.
3. Connect to Grid: Have a licensed electrician connect AC OUTPUT to home electrical panel via dedicated breaker.
4. Connect Communication: Attach Wi-Fi/Bluetooth antenna to COMM port.
5. Ground the System: Connect grounding wire to grounding terminal.
6. Apply Power: Turn on DC and AC breakers sequentially.

WARNING! Installation must be performed by qualified personnel. High voltage present—risk of electric shock. Ensure all connections are secure and properly rated.

First-Time Setup

Power on the inverter; follow prompts on LCD display.

1. Select Language: In SYSTEM menu, choose ENGLISH (default).
2. Configure Mode: Set operating mode (Grid-Tie, Hybrid, Off-Grid) based on your system.
3. Set Grid Parameters: Enter local grid voltage and frequency (e.g., 120V, 60Hz).
4. Configure Battery: If applicable, set battery type (AGM, Gel, Lithium) and charging parameters.
5. Connect to App: Enable Wi-Fi/Bluetooth and pair with "Solar Trader" mobile app.
6. Run Self-Test: Initiate system self-test from DIAGNOSTICS menu.

CAUTION! Verify all settings before final operation. Incorrect configuration may damage equipment or void warranty.

Specifications

• Model: Solar Trader 06003FX03.
• Max Solar Input: 6000W, 150-450VDC.
• AC Output: 120V/240V split-phase, 50/60Hz, 25A max per leg.
• Battery Voltage: Supports 48VDC nominal.
• MPPT Efficiency: >99%.
• Grid-Tie Efficiency: 97.5% peak.
• Communication: Wi-Fi 802.11 b/g/n, Bluetooth 5.0.
• Display: 4.3-inch color LCD touchscreen.
• Protections: Over/under voltage, over current, short circuit, over temperature, anti-islanding.
• Operating Temperature: -10°C to 50°C (14°F to 122°F).
• Enclosure Rating: IP65 (weatherproof).
• Power Source: 120V/240V AC, 50/60Hz grid connection.

Controls and Settings

Access settings via LCD touchscreen or mobile app. Front Panel: POWER button, MODE selector, EMERGENCY STOP, LCD display.

Remote App: Monitor real-time power flow, adjust settings, view history, receive alerts.

System Menu: Language, Time/Date, Grid Parameters. Mode Settings: Grid-Tie (feed-in priority), Hybrid (solar/battery/grid blending), Off-Grid (battery priority). Battery Settings: Type, Charge Voltage, Float Voltage, Max Charge Current. Solar Settings: MPPT range, PV voltage limits. Advanced: Firmware update, Data logging interval, Alarm thresholds.

Connecting Power Sources

Solar: DC INPUT terminals. Battery: BATTERY terminals. Grid: AC OUTPUT terminals.

1. Turn off all power sources and breakers before connecting.
2. Use appropriately sized cables (refer to manual appendix for gauge).
3. Secure all connections with proper torque.
4. Select source priority via MODE menu (Solar First, Grid First, Battery First).

Tip: Label all cables for easy identification during maintenance.

Operating Modes

Supports three primary operating modes.

1. Grid-Tie Mode: Solar power feeds directly to home loads, excess exported to grid. Battery charging optional.
2. Hybrid Mode: Intelligent blending of solar, battery, and grid. Prioritizes solar for self-consumption, uses battery during peak rates, grid as backup.
3. Off-Grid Mode: Operates independently from grid. Solar charges battery, battery powers loads. Grid connection disabled.
4. Mode Switching: Use MODE button on panel or app. Changes may take 30-60 seconds to complete.
5. Emergency Override: Press EMERGENCY STOP for immediate shutdown in case of fault.

WARNING! Do not switch modes under high load without proper sequencing. Ensure grid compliance when feeding back to utility.

Monitoring & Data Logging

Real-time Monitoring: View solar input, battery status, grid interaction, load consumption on LCD or app. Data Logging: Stores 365 days of performance data (energy produced, consumed, exported). Export via USB or cloud. Alerts & Notifications: Configure app for alerts on faults, low battery, grid outage, maintenance reminders.

Maintenance & Cleaning

Disconnect all power before maintenance. Inspect terminals quarterly for corrosion. Clean exterior with dry cloth; ensure ventilation slots are unobstructed. Check cable integrity annually.

CAUTION! Do not use water or chemicals. Internal maintenance must be performed by authorized service personnel only.

Regulatory Information

UL 1741 SA compliant: Meets safety and grid interconnection standards for North America. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Solar Trader Inc.; all trademarks property of their respective owners. For support, visit www.solartrader.support or contact 1-800-555-0603.

Troubleshooting

Reset: Menu > System > Factory Reset (use cautiously—backs up settings first).

Service: 1-800-555-0603; www.solartrader.support