Sunnydaze Decor AMP-P022C Manual

The Sunnydaze Decor AMP-P022C is a 22-inch decorative indoor/outdoor water fountain pump designed for tabletop fountains, small ponds, and decorative water features. It features a fully submersible design, adjustable flow control, low voltage operation (12V DC), energy-efficient motor, and includes multiple nozzle adapters for different water effects. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation & Water Flow Adjustment 8. Maintenance & Cleaning 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Submersible pump unit, AC/DC power adapter, multiple nozzle attachments (3 sizes), suction cups, and user manual.

Feature	Description
Submersible Design	Fully waterproof for underwater operation
Adjustable Flow Control	Dial to regulate water flow rate
Low Voltage Operation	12V DC power supply for safety
Multiple Nozzles	3 interchangeable nozzles for different spray patterns
Suction Cups	Secure pump to fountain base
Energy Efficient Motor	Low power consumption for continuous operation
Quiet Operation	Designed for minimal noise
Compact Size	Fits most small to medium decorative fountains
Thermal Protection	Automatic shut-off if overheated
Easy Maintenance	Removable filter screen for cleaning

Installation

Unpack and inspect all components. Ensure fountain or water feature is clean and dry.

Position pump: Place pump at the bottom of the water reservoir, preferably on a flat surface.
Attach suction cups: Press suction cups firmly to secure pump to fountain base.
Select nozzle: Choose desired nozzle and screw onto pump outlet.
Route power cord: Arrange cord neatly to prevent tangling or obstruction.
Fill with water: Add clean water until pump is fully submerged.

WARNING! Never operate pump without water. Ensure pump is completely submerged before powering on.

First-Time Setup

Connect power and adjust settings for optimal performance.

Connect power adapter: Plug DC connector into pump, then plug AC adapter into wall outlet.
Prime the pump: Ensure pump is fully submerged and water covers the intake.
Adjust flow rate: Turn flow control dial clockwise to increase flow, counterclockwise to decrease.
Test operation: Allow pump to run for 5 minutes to remove air bubbles.
Final adjustments: Fine-tune flow rate and nozzle position for desired water effect.

CAUTION! Use only the provided power adapter. Do not use with damaged cord or adapter.

Specifications

Model: AMP-P022C
Power: 12V DC, 0.5A
Max Flow Rate: 80 gallons per hour (GPH)
Max Lift Height: 2.5 feet
Cord Length: 6 feet
Dimensions: 2.5" x 2.5" x 2.2" (pump unit)
Operating Temperature: 40°F to 95°F (4°C to 35°C)
Water Type: Clean fresh water only (no saltwater or chemicals)
Included Nozzles: 3 sizes (small, medium, large spray patterns)
Warranty: 1-year limited warranty

Controls and Settings

Pump features simple manual controls. No remote or digital interface included.

Flow Control Dial: Located on top of pump housing. Rotate to adjust water output.

Nozzle Selection: Different nozzles create varying spray patterns (gentle cascade, medium spray, high arch).

Suction Cup Adjustment: Reposition suction cups for stable mounting on different surfaces.

Filter Screen: Removable mesh screen protects pump from debris.

Connecting to Power

Use only the provided 12V DC power adapter.

Ensure pump is properly installed and submerged.
Connect DC plug to pump input port (fits one way only).
Plug AC adapter into standard 120V wall outlet.
Pump should begin operation immediately.

Tip: Use a waterproof cable organizer if running cord outdoors. Keep connections dry.

Operation & Water Flow Adjustment

For continuous or intermittent operation.

Daily operation: Pump can run 24/7; ensure water level is maintained.
Flow adjustment: Use dial to match water flow to fountain design.
Nozzle changes: Turn off pump and unplug before changing nozzles.
Seasonal use: For outdoor fountains, drain and store indoors during freezing temperatures.
Water quality: Use distilled or filtered water to minimize mineral buildup.

WARNING! Do not operate without water. Do not restrict water intake or outlet.

Maintenance & Cleaning

Regular maintenance ensures longevity and optimal performance.

Weekly: Check water level and top up as needed.
Monthly: Clean pump filter screen under running water.
Seasonal: Disassemble and clean pump interior with soft brush.
Storage: Dry completely before storing in original packaging.

CAUTION! Unplug pump before cleaning. Do not use abrasive cleaners or tools.

Safety Information

Important safety precautions for use.

For indoor and outdoor use (protected from direct rainfall).
Keep away from children and pets.
Do not use with damaged cord or adapter.
Do not immerse power adapter in water.
Use only with recommended water features.
Disconnect power before servicing.

Regulatory Information

Complies with FCC Part 15 Class B for electromagnetic interference. UL listed power adapter. Copyright © 2025 Sunnydaze Decor. All trademarks property of Sunnydaze Decor Inc. For support, visit www.sunnydazedecor.com or contact 1-800-555-FOUNTAIN (3686).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Pump not working	No power/not submerged	Check power connection; ensure pump is fully underwater.
Low water flow	Clogged filter/dial setting	Clean filter screen; adjust flow control dial to higher setting.
Pump making noise	Air in system/debris	Ensure proper submersion; clean pump interior of debris.
Water leaking from pump	Damaged seal/nozzle loose	Check nozzle attachment; inspect seals for damage.
Pump overheating	Restricted flow/continuous use	Allow to cool; check for obstructions; ensure adequate water volume.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-555-FOUNTAIN; www.sunnydazedecor.com/support