Sunnydaze Decor AMP-P001B1 Manual

The Sunnydaze Decor AMP-P001B1 is a decorative outdoor/indoor water feature pump designed for fountains, waterfalls, and small ponds. It features adjustable flow control, a removable filter sponge, energy-efficient operation, and a submersible design suitable for fresh water. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Connecting to Water Features 7. Maintenance & Cleaning 8. Safety Information 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Submersible pump unit, adjustable flow control knob, removable filter sponge, power cord with plug, and suction cups for stability.

Feature	Description
Adjustable Flow Control	Knob to regulate water output from low to high
Removable Filter Sponge	Prevents debris from entering pump; easy to clean
Submersible Design	Fully waterproof for underwater operation
Suction Cups	Keeps pump stable on flat surfaces
Energy Efficient	Low power consumption for continuous use
Quiet Operation	Designed for minimal noise in residential settings
Universal Outlet	Fits standard tubing for various water features
Overheat Protection	Automatic shut-off if motor overheats
Compact Size	Fits in small spaces; ideal for tabletop fountains
Power Indicator	LED light shows when pump is running

Installation

Unpack and inspect contents. Ensure all parts are present and undamaged.

Choose location: Place pump in water feature basin or pond. Ensure it is fully submerged.
Attach tubing: Connect water outlet to tubing for your fountain or waterfall.
Secure pump: Use suction cups to attach to flat surface; ensure stable position.
Connect power: Plug into grounded 120V AC outlet. Keep cord away from water path.

WARNING! Always unplug pump before handling. Ensure electrical connections are dry.

First-Time Setup

Power on pump; adjust settings for optimal performance.

Prime pump: Submerge fully; let water fill pump chamber for 30 seconds.
Adjust flow: Turn knob clockwise to increase flow, counterclockwise to decrease.
Check filter: Ensure sponge is clean and properly seated.
Test operation: Run for 5 minutes; observe water flow and noise levels.

CAUTION! Do not run pump dry. Always keep submerged during operation.

Specifications

Model: AMP-P001B1
Power: 120V AC, 60Hz, 18W
Max Flow Rate: 80 gallons per hour (adjustable)
Max Lift Height: 3 feet
Cord Length: 6 feet
Outlet Size: 3/8" universal fitting
Dimensions: 3.5" L x 2.5" W x 2.2" H
Weight: 0.8 lbs
Water Type: Fresh water only (not for saltwater)
Operating Temp: 40°F to 104°F (4°C to 40°C)

Controls and Operation

Adjust flow control knob on top of pump. Power switch is integrated with plug connection.

Operation Steps:

Ensure pump is fully submerged.
Plug into outlet; LED indicator will light.
Adjust flow knob to desired water output.
For continuous operation, leave plugged in; pump is designed for 24/7 use.

Maintenance Mode: Unplug monthly to clean filter and inspect for debris.

Connecting to Water Features

Compatible with most small fountains, waterfalls, and pond setups.

Turn off and unplug pump before connecting.
Attach tubing to outlet; secure with clamp if provided.
Route tubing to water feature output; ensure no kinks.
Submerge pump; ensure inlet is not blocked by debris.

Tip: Use tubing size 3/8" for best fit. Trim tubing to required length.

Maintenance & Cleaning

Regular cleaning ensures longevity and optimal performance.

Unplug pump and remove from water.
Remove filter sponge; rinse under tap to remove debris.
Check impeller area for obstructions; clear with soft brush.
Reassemble and return to water feature.
Perform monthly cleaning; more often in dirty water conditions.

CAUTION! Never use chemicals or abrasive cleaners. Use only water for cleaning.

Safety Information

Always unplug before handling or maintenance.
Use only with grounded 120V outlet.
Keep electrical cord away from water spray and heat sources.
Do not operate pump dry; ensure full submersion.
Not for use in swimming pools or saltwater applications.
Keep away from children and pets during operation.
Do not modify cord or pump housing.

Regulatory Information

UL Listed: Complies with UL 1081 standard for swimming pool pumps. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Sunnydaze Decor; all rights reserved. For support, visit www.sunnydazedecor.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Pump not working	No power/plugged in dry	Check outlet; ensure pump is fully submerged; reset GFCI if tripped.
Low water flow	Clogged filter/impeller	Clean filter sponge; check impeller for debris; adjust flow knob.
Pump making noise	Air in system/debris	Prime pump by tilting to release air; clean impeller area.
LED not lighting	Power issue	Check outlet; ensure cord is undamaged; try different outlet.
Water leaking	Cracked housing	Unplug immediately; inspect for damage; do not use if cracked.
Overheating shutdown	Blocked inlet/run dry	Allow to cool; clean filter; ensure proper submersion.

Reset: Unplug for 10 minutes; restart.

Service: 1-800-555-1234; www.sunnydazedecor.com