Sunjack BackPacker Series Quick Start Manual

The Sunjack BackPacker Series is a portable solar charging solution designed for outdoor enthusiasts, travelers, and emergency preparedness. It features high-efficiency solar panels, integrated USB outputs, rugged waterproof construction, smart charging technology, and a compact foldable design. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-efficiency monocrystalline solar panels, USB output ports, LED power indicator, integrated kickstand, durable carrying case, and weather-resistant construction.

Package Contents

Unpack and verify all items are present.

1. Sunjack BackPacker solar panel unit (folded)
2. Micro-USB charging cable (for internal battery models)
3. User manual (this document)
4. Carabiner clip (attached to case)
5. Warranty card

NOTE: Some models may include an integrated power bank. Check your specific model.

Initial Setup & Charging

First-time setup for optimal solar charging.

1. Unfold the solar panel completely on a flat surface.
2. Position in direct sunlight, using kickstand for best angle (facing the sun).
3. Connect your device to the USB port using your own cable.
4. The LED indicator will light up showing charging status.
5. For first use, charge the internal battery (if equipped) fully via solar or USB input.

IMPORTANT: For best results, ensure panels are clean and in direct, unobstructed sunlight.

Specifications

• Model: BackPacker Series (various wattages: 14W, 20W, 25W)
• Solar Cell Type: High-efficiency Monocrystalline
• Output: USB 5V, up to 2.4A total (shared between ports)
• Open Circuit Voltage: 6V per panel section
• Dimensions (Folded): Varies by model (~8.5 x 5.5 x 1 inches)
• Dimensions (Unfolded): Varies by model (~23 x 8.5 x 0.2 inches)
• Weight: Approx. 1.1 lbs (500g)
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Water Resistance: IPX4 (splash resistant from all directions)
• Warranty: Limited 2-year warranty

Controls and Indicators

Simple interface with LED indicator for status monitoring.

LED Indicator Behavior:

• Solid Green: Good sunlight, charging device normally
• Flashing Green: Charging in progress (pulsing)
• Solid Red: Low sunlight or no device connected
• Flashing Red: Error condition (short circuit, over-temperature)
• No Light: No power generation (night, complete shade, or folded)

Physical Controls: None - automatic operation when device is connected and sun is present.

Charging Your Devices

Connect and charge smartphones, tablets, and other USB devices.

1. Ensure solar panel is unfolded and positioned in direct sunlight.
2. Use your device's original USB cable (or high-quality equivalent).
3. Plug the USB end into either USB port on the solar panel.
4. Connect the other end to your device.
5. The LED will indicate charging status.
6. Devices charge best when not in use during solar charging.

Tip: For faster charging, angle the panel perpendicular to the sun's rays and avoid shadows.

Solar Panel Operation

Optimal use for maximum power generation.

1. Sunlight Requirements: Direct sunlight produces best results. Cloudy conditions reduce output.
2. Positioning: Use kickstand to tilt panel toward the sun. Adjust every few hours as sun moves.
3. Temperature: Extreme heat can reduce efficiency. Allow ventilation behind panels.
4. Shading: Even partial shading on one cell can significantly reduce total output.
5. Charging Time: Varies based on sunlight intensity, device battery size, and panel wattage.
6. Storage: Fold neatly and store in dry, cool place when not in use.

WARNING! Do not stare directly at the sun when positioning panels. Do not expose to extreme heat sources.

Accessibility Features

Simple, intuitive design for all users. Tactile indicators on USB ports. Universal device compatibility.

Care & Maintenance

Proper care extends product life.

1. Cleaning: Wipe solar panels with soft, damp cloth. Dry completely. Do not use abrasive cleaners.
2. Storage: Fold neatly, store in cool, dry place away from direct sunlight when not in use.
3. Water Resistance: While IPX4 rated, avoid submerging or exposing to heavy rain for extended periods.
4. Cable Care: Disconnect cables by pulling on the connector, not the cable.
5. Inspection: Periodically check for damage to panels, fabric, or connectors.

CAUTION! Do not attempt to disassemble or repair. No user-serviceable parts inside.

Safety Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © Sunjack. For support, visit www.sunjack.com or contact [email protected].

Important Safety Instructions:

• Use only in dry conditions appropriate for IPX4 rating
• Keep away from children and pets
• Do not expose to open flame or extreme heat
• Do not attempt to charge non-USB devices
• Discontinue use if damage is observed

Troubleshooting

Reset: Disconnect all devices, fold panel, wait 30 seconds, then unfold and reconnect.

Service: [email protected]; www.sunjack.com/support