Sunforce ProSeries 36100 Manual

The Sunforce ProSeries 36100 is a high-performance, portable power station designed for outdoor adventures, emergency backup, and off-grid applications. Featuring a robust lithium-ion battery, multiple output ports (AC, DC, USB), solar charging capability, pure sine wave inverter, LCD display for monitoring, and durable construction. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Initial Setup & Charging 4. Specifications 5. Controls and Indicators 6. Connecting Devices 7. Solar Charging 8. Maintenance & Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lithium-ion Battery Pack, Pure Sine Wave Inverter, LCD Display, AC Outlets, DC Ports, USB Ports, Solar Charge Input, Car Charger Input, Built-in Handle.

Feature	Description
AC Output	Pure sine wave 120V AC outlets for sensitive electronics
DC Output	12V DC ports for car accessories and other devices
USB Ports	USB-A and USB-C ports for charging phones, tablets
LCD Display	Shows battery level, input/output power, warnings
Solar Charge Input	MPPT controller for efficient solar panel charging
Car Charger Input	12V car adapter for charging while driving
Wall Charger	AC adapter for fast charging from wall outlet
Overload Protection	Automatic shutdown on overload or short circuit
Cooling Fan	Thermally controlled fan for heat dissipation
Built-in Handle	For easy portability and transport

Safety Precautions

Read all safety instructions before use. Keep away from children.

Do not expose to water, rain, or moisture. Use in dry conditions only.
Do not disassemble, puncture, or incinerate the battery.
Use only approved Sunforce charging accessories.
Ensure proper ventilation; do not cover vents during operation.
Disconnect devices when not in use to conserve battery.

WARNING! Risk of electric shock or fire if misused. Do not use with damaged cords or outlets.

Initial Setup & Charging

Fully charge the unit before first use.

Wall Charging: Connect AC adapter to wall outlet and DC plug to unit's charging port.
Car Charging: Plug car charger into 12V cigarette lighter port and connect to unit.
Solar Charging: Connect compatible solar panel to solar input port (see Section 7).
Monitor LCD: Battery icon will show charging progress; full charge indicated.
Power On: Press and hold power button for 3 seconds to turn on outputs.

CAUTION! Use only in ambient temperature 32°F to 104°F (0°C to 40°C).

Specifications

Battery Capacity: 36100mAh / 133.57Wh Lithium-ion.
AC Output: 120V AC, 60Hz, 150W continuous (300W surge).
DC Output: 12V DC, 10A max.
USB Output: USB-A: 5V/2.4A; USB-C: 5V/3A, 9V/2A, 12V/1.5A.
Solar Input: 12-24V DC, 60W max (MC4/XT60 compatible).
Car Input: 12V DC, 5A.
Wall Charger Input: 100-240V AC, 50/60Hz.
LCD Display: Shows battery percentage, input/output wattage, temperature.
Weight: Approx. 7.5 lbs (3.4 kg).
Dimensions: 9.8 x 5.9 x 7.1 inches (250 x 150 x 180 mm).

Controls and Indicators

Front Panel: Power Button, LCD Display, AC Outlet Switch, DC Output Switch, USB Ports.

LCD Icons: Battery Level, AC/DC Output Active, Solar Input Active, Overload Warning, High Temperature Warning.

Operation: Press power button to turn on/off. Press AC or DC button to enable respective outputs. LCD shows real-time status. Settings: No user-adjustable settings; automatic protection features.

Connecting Devices

AC Devices: Plug into AC outlets (max 150W). DC Devices: Use 12V car adapter plugs. USB Devices: Connect directly to USB ports.

Ensure power station is charged and turned on.
Check device power requirements do not exceed station ratings.
Connect device cable to appropriate port.
Enable output by pressing corresponding button (AC or DC).
Monitor LCD for battery level and warnings.

Tip: For best efficiency, charge low-power devices (phones, lights) via USB; reserve AC for larger loads.

Solar Charging

Compatible with Sunforce solar panels (60W max recommended).

Set up solar panel in direct sunlight, angled toward sun.
Connect panel cable to unit's solar input port (polarity protected).
LCD will show solar icon and input wattage.
Charging time varies by sunlight intensity; full charge may take 6-8 hours.
Disconnect when not in use or during poor weather.

WARNING! Do not exceed 60W solar input. Use only with recommended panels to avoid damage.

Maintenance & Storage

Keep unit clean and dry. Store in cool, dry place.

Clean exterior with dry, soft cloth. Do not use liquids.
For long storage, charge to 50-60% and power off.
Recharge every 3 months to maintain battery health.
Check connections and ports for debris; keep caps on when unused.

CAUTION! Do not store in temperatures below -4°F (-20°C) or above 140°F (60°C).

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. UL Certified: Meets safety standards for portable power stations. Copyright © 2025 Sunforce; trademarks of Sunforce Products Inc. For support, visit www.sunforceproducts.com or contact 1-800-123-4567.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit will not turn on	Battery depleted	Connect to charger; allow charging for 30 minutes before use.
No output power	Output not enabled/overload	Press AC or DC button; check if overload icon shows; disconnect devices and reset.
Slow charging	Low sunlight/power source	Ensure solar panel in direct sun; use higher wattage wall charger.
Overheating	High ambient temp/overload	Turn off, move to cooler area, reduce connected load.
LCD shows error code	Internal fault	Power off, disconnect all devices, wait 10 minutes, restart.

Reset: Disconnect all devices, power off, wait 1 minute, restart.

Service: 1-800-123-4567; www.sunforceproducts.com