Suaoki SCB-100 User Manual

The Suaoki SCB-100 is a portable power station with a 100Wh capacity, featuring multiple output ports (AC, DC, USB), solar charging capability, pure sine wave AC output, LCD display for monitoring, and built-in safety protections. Ideal for camping, emergencies, and outdoor activities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Charging the Unit 7. Powering Devices 8. Safety Features 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, AC outlet, DC car port, USB-A and USB-C ports, LCD screen, Solar charging input, Power button, LED flashlight.

Feature	Description
AC Output	Pure sine wave 110V AC outlet for sensitive electronics
DC Output	12V car port for car appliances
USB Ports	USB-A and USB-C for phones, tablets, and small devices
LCD Display	Shows battery level, input/output wattage, and status
Solar Charging Input	For recharging via solar panel (sold separately)
LED Flashlight	Built-in emergency light with SOS mode
Power Button	Turns unit on/off and controls flashlight
Overload Protection	Automatically shuts off if overloaded
Short-Circuit Protection	Protects against short circuits on all ports
Wall Charger	Included for AC wall outlet charging

Installation & Setup

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to wall outlet and unit's DC input. Charge fully before first use.
Solar Panel Connection: Connect compatible solar panel to DC input port (use Suaoki recommended panels).
Device Connections: Ensure devices are off before connecting to output ports.
Power On: Press and hold Power button for 2 seconds to activate unit.

WARNING! Keep away from water and extreme temperatures. Do not disassemble.

First-Time Use

Power on unit; check LCD display for battery level.

Fully charge: Use wall charger until LCD shows 100%.
Test outputs: Connect a small device (e.g., phone) to USB port to verify operation.
Flashlight: Press Power button twice quickly to toggle flashlight modes (On/Off/SOS).
Monitor usage: LCD displays remaining battery and output power.

CAUTION! Do not exceed maximum output ratings. Use in well-ventilated area.

Specifications

Capacity: 100Wh (Lithium-ion).
AC Output: 110V, 60Hz, pure sine wave, max 100W.
DC Output: 12V/10A car port.
USB Output: USB-A 5V/2.4A; USB-C 5V/3A.
Input: DC 15V/3A (wall charger); Solar 18V/5A max.
LCD Display: Battery level, input/output power, temperature.
Flashlight: LED with steady and SOS modes.
Weight: Approx. 2.5 lbs.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Indicators

Front Panel: Power button, LCD display, output ports. LCD shows: Battery percentage, Input/Output wattage, Temperature warnings, Error codes.

Power Button: Press once to turn on/off outputs (ports active). Press twice quickly for flashlight. Hold 3 seconds to force shutdown.

Indicator Lights: Green LED for normal operation; Red LED for low battery or fault. LCD Icons: Battery icon, Plug icon for charging, Warning icon for overload.

Charging the Unit

Methods: Wall outlet, Solar panel, Car charger (optional).

Wall Charging: Connect AC adapter to DC input. LCD shows charging animation.
Solar Charging: Connect solar panel to DC input; ensure direct sunlight.
Car Charging: Use 12V car adapter (not included) while vehicle is running.
Charging Time: Approx. 5-6 hours via wall charger; 8-10 hours via solar (depending on conditions).

Tip: Charge regularly to maintain battery health. Avoid complete discharge.

Powering Devices

Supports phones, laptops (under 100W), lights, small appliances.

AC Devices: Plug into AC outlet; ensure device wattage is under 100W.
DC Devices: Use car port for 12V devices (e.g., car fridge, air pump).
USB Devices: Connect phones/tablets to USB-A or USB-C ports.
Simultaneous Use: Multiple devices can be used if total power is under max rating.
Monitoring: Watch LCD for battery level and overload warnings.

WARNING! Do not connect high-wattage devices like heaters or microwaves. Check device ratings first.

Safety Features

Overload Protection: Automatically cuts power if exceeded. Short-Circuit Protection: On all output ports. Temperature Control: Shuts down if overheated. Low Battery Protection: Prevents deep discharge to prolong battery life.

Care & Storage

Store in cool, dry place. Clean with dry cloth; do not use liquids.

CAUTION! Do not expose to water, fire, or extreme temperatures. Recharge every 3 months if storing long-term.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE and RoHS certified. Copyright © 2023 Suaoki; trademarks of Suaoki Inc. For support, visit www.suaoki.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Recharge fully; press and hold Power button.
No output from ports	Overload protection triggered	Disconnect devices; wait 30 seconds; restart unit.
Slow charging	Low solar input/wrong adapter	Ensure proper sunlight; use included wall charger.
LCD shows error code	Overheat/short circuit	Turn off; cool down; check for shorted cables.
Flashlight not working	Button malfunction	Press Power button twice quickly; ensure unit is on.

Reset: Turn off, disconnect all devices, recharge fully, then restart.

Service: [email protected]; www.suaoki.com