Somfy WF Instructions Manual

The Somfy WF is a wireless motor control system designed for automated window coverings, featuring radio frequency communication, compatibility with various Somfy motors, remote control operation, programmable settings, and integration with home automation systems. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

Features at a Glance

Key components: Wireless transmitter, Motor unit, Power supply, Wall switch, Remote control.

Installation

Unpack and inspect contents. Ensure all components are present.

1. Mount the motor: Secure motor to window covering mechanism following manufacturer guidelines.
2. Install power supply: Connect to appropriate voltage (check local requirements).
3. Position transmitter: Place within 30 meters of motor with clear line of sight.
4. Install wall switch: Mount at convenient location, connect wiring if hardwired.
5. Test basic operation: Power on system and verify motor responds to basic commands.

WARNING! Electrical installation should be performed by qualified personnel. Ensure power is disconnected before installation.

First-Time Setup

Power on system; follow programming sequence.

1. Pair remote control: Press and hold programming button on motor, then press remote button.
2. Set travel limits: Manually move covering to desired positions and set limits.
3. Configure channels: Assign different channels for individual motor control.
4. Test all functions: Verify open, close, stop, and intermediate position commands work correctly.
5. Program timer (optional): Set daily schedule for automatic operation.

CAUTION! Keep hands clear of moving parts during limit setting. Ensure proper alignment to prevent damage.

Specifications

• Communication: 433.42 MHz radio frequency
• Range: Up to 30 meters (clear line of sight)
• Power Supply: 24V DC or 230V AC (depending on model)
• Motor Types: Compatible with Somfy tubular and chain drive motors
• Control Channels: Up to 16 individually addressable channels
• Battery Life: Remote: 2 years typical use; Wall switch: 3-5 years
• Operating Temperature: -20°C to +60°C
• Safety Standards: CE, RoHS, R&TTE compliant
• Warranty: 2 years from date of purchase

Controls and Settings

Access programming via dedicated buttons on motor unit or remote control.

Remote Control: OPEN, CLOSE, STOP, PROG (program), Channel selection (1-16), My position (favorite position), Sun mode activation.

Wall Switch: Up/Down buttons, Stop button, Programming button (hidden), LED status indicator.

Programming Options: Travel limits, Running time, Obstruction detection sensitivity, Channel assignment, Timer settings, Sun tracking parameters, Group control setup.

Connecting Devices

Multiple motor connection: Up to 16 motors on different channels. Home automation: Via Somfy Connexoon or TaHoma interface. Additional remotes: Pair multiple remotes to same system.

1. Turn off power before making connections.
2. Connect motors in parallel for group operation.
3. Use appropriate interface for home automation integration.
4. Test each connection individually before group operation.

Tip: Label each motor with its channel number for easy identification during programming.

Programming the System

Supports individual and group programming.

1. Enter programming mode: Press and hold PROG button until LED flashes.
2. Select function: Use arrow buttons to choose setting (limits, timer, etc.).
3. Set parameters: Adjust values using open/close commands.
4. Save settings: Press PROG button to confirm and exit.
5. Test programming: Verify all programmed functions work correctly.
6. Group programming: Assign multiple motors to same channel for synchronized operation.
7. Favorite position: Set intermediate position for one-touch operation.
8. Sun tracking: Program based on time of day and season.

WARNING! Do not interrupt power during programming. Follow sequence exactly as described.

Safety Features

Obstruction Detection: Automatically stops and reverses if obstruction detected. Manual Override: Manual operation possible during power failure. Child Safety: Lock function prevents unauthorized operation. Emergency Stop: Immediate stop via dedicated button.

Care & Maintenance

Regular inspection recommended. Clean with dry cloth only.

1. Monthly: Check mounting hardware for tightness.
2. Quarterly: Inspect cables and connections.
3. Annually: Lubricate moving parts (if recommended by manufacturer).
4. Battery replacement: Replace remote batteries when performance decreases.

CAUTION! Do not use water or cleaning solvents. Disconnect power before maintenance.

Regulatory Information

FCC ID: XXXXXXXXX (for US models). CE Declaration of Conformity. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2025 Somfy Systems. All rights reserved. Somfy is a registered trademark. For support, visit www.somfy.com or contact customer service at 1-800-XXX-XXXX.

Troubleshooting

Reset: Press and hold PROG + DOWN buttons for 10 seconds to factory reset.

Service: 1-800-XXX-XXXX; www.somfy.com/support