Somfy Oximo WireFree Instructions Manual

The Somfy Oximo WireFree is a battery-operated, radio-controlled interior blind motor designed for easy installation and integration into smart home systems. It features wireless control via remote or app, quiet operation, adjustable limit settings, and compatibility with various blind types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Oximo WireFree motor unit, Remote Control, Mounting brackets, Limit setting tool, Battery compartment.

Installation

Unpack and inspect contents. Ensure blind is properly mounted and operational manually first.

1. Mount the brackets: Attach provided brackets to the wall or window frame as per manual.
2. Insert batteries: Open battery compartment, insert 4 D-cell batteries observing polarity.
3. Attach motor to blind tube: Slide motor onto the tube end and secure with set screw.
4. Mount motor in brackets: Place motor unit into the mounted brackets until it clicks.
5. Set mechanical limits: Manually move blind to desired fully open and closed positions and set limits using tool.

WARNING! Ensure blind is properly balanced and motor is securely mounted before operation. Do not force motor during installation.

First-Time Setup

Power on motor; pair with remote control.

1. Activate pairing mode: Press and hold programming button on motor until LED flashes.
2. Pair remote: Press and hold UP and DOWN buttons on remote simultaneously until motor responds.
3. Test operation: Use remote to move blind up, down, and stop to verify limits and function.
4. Adjust limits if needed: Use limit setting tool to fine-tune fully open/closed positions.
5. Integrate with smart system (optional): Use app to add motor to your Somfy ecosystem.

CAUTION! Keep remote away from children. Ensure blind path is clear of obstructions before first operation.

Specifications

• Motor Type: DC motor, battery operated.
• Power Source: 4 x 1.5V D-cell alkaline batteries (LR20).
• Battery Life: Approximately 1 year with normal use (2-4 cycles per day).
• Radio Frequency: 868.35 MHz (EU) or 433.42 MHz (US/other regions).
• Range: Up to 30 meters line-of-sight.
• Maximum Tube Diameter: 60mm.
• Maximum Load: 7 kg (15.4 lbs).
• Noise Level: < 35 dB(A).
• Operating Temperature: 0°C to 40°C (32°F to 104°F).
• Weight: 1.2 kg (2.65 lbs) without batteries.

Controls and Settings

Access settings via remote control or smartphone app. Motor Unit: Programming button, LED indicator, Limit adjustment points.

Remote: UP, DOWN, STOP, PROG (programming), Favorite position button.

Basic Operation: Press UP to raise blind, DOWN to lower, STOP to halt movement. Settings: Limit adjustment (mechanical), Radio channel selection (to avoid interference), Favorite position setting (set a preferred blind height). Smart Features: Schedule opening/closing, Sun tracking (with sensor), Group control (multiple blinds).

Connecting to Control Systems

Pair with Somfy TaHoma, Connexoon, or other compatible gateways for smart control.

1. Ensure gateway is installed and connected to your Wi-Fi network.
2. Put motor into pairing mode (press programming button until LED flashes rapidly).
3. In gateway app, select "Add device" and follow prompts to detect motor.
4. Assign motor to a room and name it for easy identification.
5. Create scenes or schedules as desired.

Tip: Ensure motor is within radio range of the gateway (typically within same room or adjacent room).

Operating the Motor

Operate via remote, wall switch, or smartphone app.

1. Basic control: Press UP/DOWN on remote; press STOP to halt at any position.
2. Favorite position: Set by moving blind to desired height, then press and hold FAV button on remote for 3 seconds.
3. Recall favorite: Briefly press FAV button to move blind to saved position.
4. Sun automation: With compatible sun sensor, blind can automatically lower during bright sunlight.
5. Wind protection: With wind sensor, blind will automatically raise during high winds.
6. Group control: Control multiple blinds simultaneously by grouping them in the app.
7. Schedule: Set daily or weekly schedules for automatic operation.

WARNING! Do not operate if blind appears stuck or obstructed. Keep hands clear of moving parts.

Safety Features

Obstruction detection: Motor will stop and reverse slightly if it encounters resistance. Manual override: Blind can be operated manually by pulling on the chain or bead chain (if equipped) in case of power failure. Child safety: Remote control can be locked to prevent accidental operation.

Care & Maintenance

Regularly check battery level via LED indicator. Clean motor housing with dry, soft cloth. Do not use liquids or abrasive cleaners.

CAUTION! Replace all batteries at once with same type and brand. Remove batteries if motor will not be used for extended periods. Do not attempt to disassemble motor unit.

Regulatory Information

CE marked: Complies with European directives. FCC ID: Contains transmitter module compliant with Part 15 of FCC rules. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. For support, visit www.somfy.com or contact your local Somfy distributor.

Troubleshooting

Reset: Remove batteries for 30 seconds to reset motor. Re-pair remote afterwards.

Service: For technical support, visit www.somfy.com or contact authorized service center.