Soltronix RP-32F13.7V Operating Instructions

The Soltronix RP-32F13.7V is a 32-inch industrial-grade panel display with a 13.7V DC power input, designed for embedded systems, control panels, and rugged environments. It features a high-brightness LCD, wide operating temperature range, multiple video inputs (VGA, DVI, HDMI), touch screen compatibility (optional), metal enclosure, and mounting options for rack or panel installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Touch Screen Operation 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-brightness LCD panel, metal enclosure, Power input terminal, VGA INPUT, DVI INPUT, HDMI INPUT, Touch screen connector (optional), Control buttons.

Feature	Description
Power input terminal	For 13.7V DC power supply connection
VGA INPUT port	For analog computer video connection
DVI INPUT port	For digital video connection
HDMI INPUT port	For high-definition multimedia interface
Touch screen connector	For optional resistive/capacitive touch panel
Control buttons	Menu, Power, Input Select, Auto Adjust
MOUNTING HOLES	VESA 100x100 and 200x200 compatible
AUTO ADJUST	Auto-syncs to VGA input signal
INPUT SELECT	Cycles through available video inputs
POWER	Turns display on/off

Installation

Unpack and inspect contents. Ensure proper mounting surface.

Mount display: Use VESA mounting holes for panel or rack installation.
Connect power: Attach 13.7V DC power supply to terminal block (observe polarity).
Connect video sources: Use appropriate cables for VGA, DVI, or HDMI inputs.
Connect touch screen (if equipped): Attach touch panel cable to connector.
Secure all connections and power on.

WARNING! Use proper mounting hardware. Ensure DC power polarity is correct to avoid damage.

First-Time Setup

Apply power; display should show splash screen.

Select input source: Press INPUT button to cycle through VGA, DVI, HDMI.
Auto-adjust (VGA): Press AUTO button to optimize image position and phase.
Access OSD menu: Press MENU button to adjust brightness, contrast, etc.
Configure touch screen (if equipped): Calibrate via OSD menu.
Save settings: Exit menu to save adjustments.

CAUTION! Do not exceed maximum mounting torque. Ensure adequate ventilation.

Specifications

Screen Size: 32 inches LCD.
Power Input: 13.7V DC (±10%), 4A typical.
Brightness: 450 cd/m² typical.
Inputs: VGA (15-pin D-sub), DVI-D, HDMI, Touch (USB/serial optional).
Resolution: Native 1920 x 1080 @ 60Hz.
Operating Temp: -10°C to 60°C.
Storage Temp: -20°C to 70°C.
Enclosure: Metal, IP65 front panel (optional).
Mounting: VESA 100x100, 200x200.

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, MENU, INPUT, AUTO.

OSD Menu Structure: Picture (Brightness, Contrast, Color Temp), Image (Position, Phase, Clock), Input Select (VGA, DVI, HDMI), System (Language, Reset, Touch Calibration), Information (Model, Serial, Input Signal).

Picture: Adjust brightness, contrast, color temperature (9300K, 6500K, User). Image: Fine-tune position, phase, and clock for VGA input. System: Select language (ENGLISH default), reset to factory defaults, calibrate touch screen. Information: Display current input signal parameters and device info.

Connecting Devices

Video Sources: VGA for PC, DVI for digital sources, HDMI for multimedia.

Power off display and source device before connecting.
Use appropriate cable: VGA (analog), DVI-D (digital), HDMI (digital with audio).
Secure connections with thumbscrews (VGA/DVI).
Power on source device first, then display.
Select correct input via INPUT button or OSD menu.

Tip: For longest cable runs, use high-quality shielded cables.

Touch Screen Operation

Optional resistive or capacitive touch screen models available.

Driver installation: Install appropriate touch driver on host computer.
Calibration: Access OSD System menu > Touch Calibration; follow on-screen points.
Testing: Use provided test utility to verify touch accuracy.
Multi-touch (capacitive models): Supports gestures if driver enabled.

WARNING! Use stylus or finger only on touch surface. Avoid sharp objects.

Advanced Features

Portrait/Landscape Rotation: Supported in OSD (Image > Rotation). Power Saving: DPMS support for VGA input. Color Calibration: User color temperature adjustment. Firmware Update: Via service port (contact support).

Care & Cleaning

Disconnect power before cleaning. Use microfiber cloth with mild cleaner if needed.

CAUTION! Do not use abrasive cleaners or solvents. For touch screens, use approved cleaning solutions only.

Regulatory Information

FCC Part 15: Class A digital device; may cause interference in residential areas. CE compliant. RoHS compliant. Copyright © 2025 Soltronix; trademarks of Soltronix Technologies, Inc. For technical support, visit www.soltronix.com/support or contact 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply/connection	Verify 13.7V DC input; check polarity; ensure connections secure.
No image	Input selection/cable	Select correct input; check cable connections; verify source is active.
Blurry or unstable image (VGA)	Timing/sync	Press AUTO button; manually adjust Phase/Clock in OSD.
Touch not working	Driver/calibration	Install correct driver; recalibrate touch screen; check cable.
Display too dim or too bright	Settings/environment	Adjust brightness in OSD; ensure ambient light not causing glare.

Reset: OSD > System > Reset to Factory Defaults.

Service: 1-800-555-0199; www.soltronix.com/support