The Soliom BF08 is a WiFi-enabled security camera designed for indoor/outdoor monitoring with features including HD video streaming, motion detection alerts, two-way audio, night vision, cloud storage, and mobile app control. Below are key sections for setup, features, operation, and troubleshooting.
Key components: Camera unit, Power adapter, Mounting kit, Quick start guide.
| Feature | Description |
|---|---|
| Video Resolution | 1080p Full HD streaming |
| Night Vision | Infrared LEDs for up to 10m visibility |
| Two-Way Audio | Built-in microphone and speaker |
| Motion Detection | Customizable zones with push notifications |
| Storage | Cloud & microSD card support (up to 128GB) |
| Weather Resistance | IP65 rated for outdoor use |
| WiFi Connectivity | 2.4GHz WiFi (802.11 b/g/n) |
| Power Source | 5V/2A DC adapter |
| Mobile App | Soliom App for iOS & Android |
| Viewing Angle | 110° wide-angle lens |
Unpack and inspect contents. Choose optimal location.
WARNING! Avoid pointing camera directly at light sources. Mount at height of 2-3 meters for best coverage.
Power on camera; follow app-guided setup.
CAUTION! Ensure WiFi signal is strong at camera location during setup.
Access settings via Soliom mobile app. Physical buttons: Reset button (inside unit).
App Settings: Video quality, motion sensitivity, alert schedules, night vision mode, audio volume.
Camera Status LED: Solid blue (connected), Blinking blue (setup mode), Red (error).
Features: Motion detection zones, activity alerts, recording schedules, sharing access with family members.
Camera supports 2.4GHz networks only.
Tip: If connection fails, move camera closer to router or check password.
Main functions: Live view, playback, alerts, settings.
WARNING! Ensure app permissions are enabled for notifications and microphone.
Customize detection zones and sensitivity.
Note: Reduce false alerts by avoiding areas with moving trees or shadows.
Unplug power before cleaning. Use soft, dry cloth for lens; avoid abrasive materials.
CAUTION! Do not use water or chemicals on camera. Check seals periodically for outdoor units.
FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). For support, visit www.soliom.com or contact [email protected].
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Camera offline | WiFi disconnection | Check power and WiFi; restart camera and router. |
| Poor video quality | Weak WiFi signal | Move camera closer to router; reduce interference. |
| No motion alerts | App settings | Enable notifications in app and phone settings. |
| Night vision not working | Ambient light | Ensure IR LEDs are unobstructed; clean lens. |
| Can't add camera | Setup error | Reset camera (hold reset button 5s) and retry setup. |
Reset: Use reset button inside unit to restore factory settings.
Service: [email protected]; www.soliom.com