Solight FP06 Quick Start Manual

The Solight FP06 is a compact, portable flashlight featuring a high-lumen LED, multiple lighting modes, durable aluminum alloy construction, water-resistant design, rechargeable lithium-ion battery with USB-C charging, and intuitive one-button operation. Ideal for outdoor activities, emergencies, and everyday use. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-intensity LED, Mode button, USB-C charging port, Battery indicator, Lanyard attachment point, Anti-roll body design.

Package Contents

Unpack and verify all components are present.

1. Solight FP06 Flashlight (1)
2. 18650 Lithium-ion Battery (pre-installed)
3. USB-C Charging Cable (1)
4. User Manual (this document)
5. Wrist Lanyard (1)
6. Spare O-ring for water resistance (1)

WARNING! Keep packaging materials away from children to prevent choking hazard.

Initial Setup & Charging

Before first use, fully charge the battery.

1. Remove the tail cap by turning counterclockwise.
2. Insert the 18650 battery with positive (+) terminal facing the LED head.
3. Replace tail cap and tighten securely.
4. Connect USB-C cable to flashlight charging port and power source.
5. Charging indicator shows red while charging, turns green when full (approx. 3 hours).
6. Press and hold the side button to turn on.

CAUTION! Use only the provided USB-C cable and a standard 5V USB power source. Do not overcharge.

Specifications

• LED: CREE XPL-HD, 1000 lumens max output
• Battery: 18650 Li-ion, 3.7V, 2600mAh
• Charging Input: 5V/1A via USB-C
• Runtime: 2-10 hours depending on mode
• Beam Pattern: Adjustable focus from spot to flood
• Water Resistance: IPX4 (splash resistant)
• Impact Resistance: 1 meter drop tested
• Operating Temperature: -20°C to 40°C (-4°F to 104°F)
• Storage Temperature: -30°C to 60°C (-22°F to 140°F)
• Materials: Aluminum alloy body, tempered glass lens

Controls and Operation

Single side button controls all functions.

Basic Operation: Press once to turn on/off. Press repeatedly to cycle through modes: High → Medium → Low → Strobe → SOS.

Special Functions: - Press and hold for 2 seconds to activate momentary mode (light stays on while holding) - Double-click from off to activate last used mode - Triple-click from off to activate locator beacon (flashes every 5 seconds)

Focus Adjustment: Rotate the head clockwise for spot beam, counterclockwise for flood beam.

Lighting Modes

Five distinct modes for various situations.

1. High: 1000 lumens, 2-hour runtime, maximum brightness
2. Medium: 500 lumens, 5-hour runtime, balanced performance
3. Low: 100 lumens, 10-hour runtime, extended use
4. Strobe: Rapid flashing, for signaling or emergency
5. SOS: International distress signal (3 short, 3 long, 3 short)

Memory Function: Flashlight remembers last used mode (except strobe/SOS) when turned off.

Battery & Power Management

Built-in battery protection and indicators.

1. Battery Indicator: Button LED shows battery status: - Green: >70% charge - Yellow: 30-70% charge - Red: <30% charge (time to recharge) - Flashing Red: Critical low (<10%)
2. Low Voltage Protection: Automatically reduces brightness when battery is low to prevent damage.
3. Charging: Red LED while charging, green when complete. Do not charge unattended for extended periods.
4. Storage: If not using for >1 month, store with 50% charge in cool, dry place.

Tip: For longest battery life, avoid complete discharges and store at room temperature.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Clean lens and body with soft, dry cloth only.
2. Check O-ring seal monthly for debris or damage; replace if necessary.
3. Apply small amount of silicone grease to O-ring every 6 months for optimal water resistance.
4. Keep threads clean and free of debris.
5. Do not disassemble beyond battery replacement.

CAUTION! Never use solvents, alcohol, or abrasive cleaners. Do not submerge in water despite IPX4 rating.

Safety Information

Important safety precautions for use and handling.

• Do not look directly into LED when turned on - may cause eye damage
• Do not use in explosive atmospheres
• Keep away from children - small parts and bright light hazards
• Use only provided or manufacturer-approved battery
• Do not modify or attempt to repair - contact support for service
• Dispose of battery properly according to local regulations
• Do not expose to extreme temperatures or direct sunlight for extended periods

Warranty & Support

Solight FP06 comes with 2-year limited warranty covering defects in materials and workmanship. Warranty does not cover damage from misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims or support: - Visit: www.solight-support.com - Email: [email protected] - Call: 1-800-555-0199 (Mon-Fri, 9AM-5PM EST)

Register your product online for extended support and firmware updates.

Troubleshooting

Reset Procedure: Remove battery for 30 seconds, reinsert, then press button 10 times rapidly.

Service: 1-800-555-0199; www.solight-support.com