Solarv enjoy solar 5410007 Manual

The Solarv enjoy solar 5410007 is a portable solar-powered device designed for outdoor use, featuring a high-efficiency solar panel, integrated battery storage, multiple USB output ports, LED indicator lights, waterproof casing, and a durable, foldable design. It is ideal for charging small electronics like phones, tablets, and lights while on the go. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Lithium-ion battery pack, USB-A and USB-C output ports, LED power indicator, waterproof IP65 casing, foldable stand, and carrying handle.

Installation

Unpack and inspect contents. Ensure all parts are present and undamaged.

1. Unfold the solar panel: Gently unfold the solar panel sections and lock into place using the built-in stands.
2. Position for sunlight: Place the unit in direct sunlight, facing the solar panel towards the sun at an optimal angle.
3. Check indicator: The LED indicator should light up, showing solar charging is active.
4. Secure location: Place on a stable, flat surface to prevent tipping or movement.

WARNING! Do not expose to extreme temperatures or submerge in water beyond IP65 rating. Keep away from children and pets.

First-Time Setup

Before first use, fully charge the internal battery via solar or USB-C input.

1. Initial solar charge: Place in direct sunlight for 6-8 hours to fully charge the battery (LED will show solid green when full).
2. Connect a device: Use a compatible USB cable to connect your device to one of the output ports.
3. Check charging: The device should begin charging; LED will blink during power delivery.
4. Storage: If not using immediately, store in a cool, dry place with battery at 50% charge.

CAUTION! Only use provided or certified cables. Do not attempt to disassemble the unit.

Specifications

• Model: Solarv enjoy solar 5410007.
• Solar Panel: 20W Monocrystalline.
• Battery: 10,000mAh Lithium-ion, 3.7V.
• Output Ports: 2x USB-A (5V/2.4A max each), 1x USB-C (5V/3A max).
• Input Port: USB-C (5V/3A for auxiliary charging).
• LED Indicators: Battery level (25%/50%/75%/100%) and charging status.
• Protection: Over-current, short-circuit, over-temperature, reverse polarity.
• Waterproof: IP65 rated casing.
• Dimensions (Folded): 250 x 180 x 30 mm.
• Weight: 850g.
• Operating Environment: -10°C to 50°C, 5% to 90% humidity.

Controls and Settings

Simple interface with LED indicator and power button.

Power Button: Press once to turn on output, press again to turn off. Hold for 3 seconds to reset.

LED Indicator: - Solid Green: Battery fully charged (76%-100%). - Solid Blue: Battery medium charge (51%-75%). - Solid Yellow: Battery low charge (26%-50%). - Solid Red: Battery very low (0%-25%), needs charging. - Blinking Green: Solar charging active. - Blinking Red: Fault condition (overload, short circuit).

Auto-shutoff: Unit automatically turns off output after 2 hours of inactivity or when battery is depleted.

Connecting Devices

Compatible with most USB-powered devices: smartphones, tablets, Bluetooth speakers, LED lights, GPS units, etc.

1. Ensure the Solarv unit is charged (LED shows at least yellow).
2. Press the power button to activate output ports.
3. Connect your device using a certified USB cable.
4. The device should begin charging; LED may blink during power delivery.
5. Disconnect when charging is complete or when not in use.

Tip: For fastest charging, use the USB-C port with compatible devices. Do not exceed total output of 5V/5A across all ports.

Charging & Operation

Supports simultaneous solar charging and device charging.

1. Solar charging: Place in direct sunlight with panel facing sun. LED blinks green while charging.
2. Device charging: Connect device to USB port. LED shows battery level during discharge.
3. Dual operation: You can charge devices while solar panel replenishes the battery.
4. Battery status: Check LED color to monitor remaining capacity.
5. Charging time: Full solar charge takes 6-8 hours in optimal conditions; USB-C input takes 4-5 hours.
6. Output priority: When solar input is insufficient, unit draws from battery automatically.

WARNING! Do not look directly at the solar panel under bright sunlight. Keep the solar panel clean for optimal performance.

Safety Features

Over-current Protection: Automatically cuts off output if current exceeds safe limits. Short-circuit Protection: Detects and disables output during short circuit. Over-temperature Protection: Reduces output or shuts down if internal temperature exceeds 60°C. Reverse Polarity Protection: Prevents damage from incorrect cable connection.

Care & Cleaning

Turn off and disconnect all devices before cleaning. Use a soft, dry cloth to wipe the solar panel and casing. For stubborn dirt, use a damp cloth with mild soap, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or high-pressure water. Do not open the casing. Store in a dry place away from direct sunlight when not in use for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE, RoHS compliant. Copyright © 2025 Solarv; trademarks of Solarv International Ltd. For support, visit www.solarv.com or contact 1-800-555-5410.

Troubleshooting

Reset: Hold power button for 10 seconds to perform factory reset (LED will flash three times).

Service: 1-800-555-5410; www.solarv.com/support