Solargo2 SPFC12 User Manual

The Solargo2 SPFC12 is a 12V portable folding solar panel charger designed for outdoor use, camping, and emergency power backup. It features high-efficiency monocrystalline solar cells, a built-in charge controller with USB outputs (5V/2.4A), a waterproof and dustproof design, an integrated kickstand, and a carrying handle. Compatible with charging power banks, smartphones, tablets, cameras, and other USB devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Operation 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Foldable solar panel array, Integrated charge controller, USB output ports, Kickstand, Carrying handle, Status LED indicators.

Feature	Description
Solar Cells	High-efficiency monocrystalline silicon
USB Output Ports	Dual USB ports (5V/2.4A max each)
Charge Controller	Built-in MPPT for optimal power conversion
Kickstand	Adjustable angle for optimal sun exposure
Carrying Handle	Integrated for easy transport
Status LED	Indicates charging and power output status
Waterproof Rating	IP65 (dust-tight and protected against water jets)
Folding Design	Compact storage and easy deployment
Output Cable	Integrated USB cable with multiple adapters
Overload Protection	Automatic shutdown in case of overload

Installation

Unpack and inspect contents. Ensure all parts are present and undamaged.

Unfold the solar panel: Release the latches and lay the panels flat.
Deploy the kickstand: Adjust to desired angle facing the sun.
Position for sunlight: Place in direct sunlight, avoiding shadows.
Connect device: Plug your USB device into the output port.

WARNING! Do not expose to extreme temperatures or submerge in water beyond IP65 rating. Keep away from children.

First-Time Setup

Position the panel and begin charging.

Unfold completely: Ensure all panels are locked in place.
Angle towards sun: Use kickstand to achieve optimal angle (approx. 30-45 degrees).
Check LED indicator: Green light indicates ready for charging.
Connect device: Use provided USB cable or your own compatible cable.

CAUTION! Avoid placing on hot surfaces. Do not look directly at the reflective surface in bright sunlight.

Specifications

Model: Solargo2 SPFC12.
Rated Power: 12W (Max).
Open Circuit Voltage: 9V.
Short Circuit Current: 1.33A.
USB Output: 5V DC, 2.4A (Max per port).
Cell Type: Monocrystalline Silicon.
Dimensions (Folded): 11.8 x 7.1 x 1.2 inches.
Dimensions (Unfolded): 11.8 x 21.3 x 0.2 inches.
Weight: 1.65 lbs.
Operating Temperature: -4°F to 140°F (-20°C to 60°C).
Protection: IP65 Water and Dust Resistance.

Controls and Settings

Simple operation with minimal controls. Status LED indicates operation mode.

LED Indicators: Off (No power), Green (Charging), Flashing Green (Low sunlight/No load), Red (Fault/Overload).

No user-adjustable settings. The built-in charge controller automatically optimizes power output based on sunlight conditions and connected load.

Connecting Devices

Compatible with any USB-powered device using a standard USB cable.

Ensure the solar panel is in sunlight and LED is green.
Connect your device's USB cable to one of the USB output ports on the charge controller.
Connect the other end to your device (phone, power bank, etc.).
Charging should begin automatically. Check your device's charging indicator.

Tip: For fastest charging, use a short, high-quality USB cable. Charging speed depends on sunlight intensity.

Charging Operation

Designed for straightforward solar charging.

Optimal Placement: Position panel where it receives direct, unobstructed sunlight for the longest period.
Angle Adjustment: Change the kickstand angle seasonally for best performance.
Monitoring: The green LED will remain steady during normal charging. A flashing light indicates insufficient power generation.
Multiple Devices: You can charge two devices simultaneously, but total output is limited to 2.4A shared.
Storage: Fold the panels and secure the latch when not in use.

WARNING! Do not attempt to disassemble the unit or bypass the charge controller. Do not connect to non-USB devices.

Safety Features

Over-current Protection: Automatically limits output to prevent damage. Short-circuit Protection: Safeguards against output shorts. Reverse Polarity Protection: Prevents damage from incorrect cable connection. Over-temperature Protection: Reduces output if controller overheats.

Care & Cleaning

Disconnect all devices before cleaning. Use a soft, damp cloth to wipe the solar panel surface. For stubborn dirt, use mild soap and water. Dry thoroughly with a soft cloth.

CAUTION! Do not use abrasive cleaners, solvents, or high-pressure water. Do not clean while the panel is hot or in direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for a Class B digital device. CE Certified: Meets EU safety, health, and environmental requirements. RoHS Compliant: Contains no hazardous substances. Copyright © 2025 Solargo2; all trademarks are property of Solargo2 Inc. For support, visit www.solargo2.com/support or contact 1-800-555-0123.

Troubleshooting

Symptom	Possible Cause	Corrective Action
LED not lighting	No sunlight / Panel folded	Move to direct sunlight. Unfold panel completely.
Device not charging	Faulty cable / Weak sun	Try a different USB cable. Reposition for better sun exposure.
Red LED indicator	Overload / Short circuit	Disconnect all devices. Wait 30 seconds and reconnect one device.
Slow charging	Cloudy day / Low sun angle	Expected in poor light. Angle panel more directly at the sun.
Physical damage	Impact or water ingress	Discontinue use immediately. Contact customer service.

Reset: Disconnect all devices and cover the panel from sunlight for 1 minute to reset the controller.

Service: 1-800-555-0123; www.solargo2.com/support