Solaire TITANE ST-PP3 User Manual

The Solaire TITANE ST-PP3 is a high-performance portable power station designed for outdoor adventures, emergency backup, and off-grid applications. Featuring a robust lithium-titanate battery, multiple output ports (AC, DC, USB-C PD, USB-A), solar charging capability, LCD display, and durable construction. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-Titanate battery pack, LCD status display, AC output ports, DC output ports, USB-C Power Delivery, USB-A ports, Solar charging input, Car charging input, Wall charging input.

Feature	Description
Battery Type	Lithium-Titanate (LTO) for fast charging & long lifespan
AC Output	Pure sine wave, 300W continuous (600W surge)
DC Output	12V/10A car port for accessories
USB-C PD	100W Power Delivery for laptops/phones
USB-A Ports	Two 5V/2.4A ports for standard devices
Solar Input	Supports up to 200W solar panel (11-28V)
LCD Display	Shows battery level, input/output power, temperature
POWER Button	Turns unit on/off
DC/AC Button	Switches between DC and AC output modes
LED Light	Built-in emergency light with SOS mode

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to wall outlet and unit's charging port.
Connect solar panel: Use MC4 to XT60 cable (sold separately) from panel to solar input.
Connect car charger: Plug 12V car adapter into vehicle's cigarette lighter port.
Position unit: Ensure ventilation openings are unobstructed.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; check LCD display.

Initial charge: Charge fully (4-6 hours) before first use.
Set preferences: Press and hold SETUP button to access brightness, auto-shutdown timer.
Test outputs: Connect small device to USB port to verify functionality.
Configure solar: Ensure solar panel is properly oriented and connected.

CAUTION! Use only approved charging accessories. Incorrect voltage can damage unit.

Specifications

Battery Capacity: 1000Wh (Lithium-Titanate).
AC Output: 300W continuous, 600W surge, 110V/60Hz.
DC Output: 12V/10A (max 120W).
USB-C PD: 100W (5V/9V/12V/15V/20V).
USB-A: 5V/2.4A each.
Solar Input: 11-28V, 15A max, 200W max.
Car Input: 12V/24V, 8A max.
AC Charging: 110-240V, 50/60Hz, 150W max.
Weight: 22 lbs (10 kg).
Operating Temp: -4°F to 140°F (-20°C to 60°C).

Controls and Settings

Access settings via SETUP button. Front Panel: POWER, DC/AC, LED Light, SETUP.

LCD Display: Shows battery percentage, input power, output power, temperature, estimated runtime.

Settings Menu: Brightness (High/Medium/Low), Auto-shutdown (1/2/4/8 hrs/Off), Overload protection (On/Off), Temperature unit (°C/°F). Battery: Charge/discharge status, cycle count, health indicator. Output: AC frequency (60Hz default), DC voltage (12V).

Connecting Devices

AC Devices: Plug into AC outlets (max 300W). DC Devices: Use 12V car port. USB: Use USB-C or USB-A ports.

Turn on unit with POWER button.
Select output mode: Press DC/AC for AC output.
Connect device: Ensure device power requirement is within unit's limits.
Monitor LCD: Check output power and battery level.

Tip: Start with lowest power device first when testing multiple connections.

Charging & Power Management

Supports solar, AC wall, and car charging.

AC Charging: Use included adapter; full charge in 4-6 hours.
Solar Charging: Connect compatible panel; optimal in direct sunlight.
Car Charging: Use while driving; charges in 6-8 hours.
Battery Care: Avoid complete discharge; store at 50-80% charge if not used for months.
Parallel Use: Can connect two units for double capacity (kit sold separately).
Pass-Through Charging: Can charge unit while powering devices (except solar input).

WARNING! Do not exceed max input ratings. Use only approved solar panels.

Safety Features

Overload Protection: Automatically shuts off output if exceeded. Short Circuit Protection: Detects and cuts power. Temperature Control: Reduces output if overheating. Low Voltage Protection: Shuts down at 10% to protect battery. Spark-Free: Prevents sparks when connecting DC devices.

Care & Maintenance

Keep clean and dry. Wipe with damp cloth; do not use chemicals. Store in cool, dry place. Check terminals for corrosion periodically.

CAUTION! Do not disassemble. No user-serviceable parts inside. Contact authorized service for repairs.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Solaire Energy Systems; TITANE is a trademark of Solaire. For support, visit www.solaireenergy.com or contact 1-800-555-0123.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Connect to power source and charge for 30 minutes before use.
No output power	Overload protection triggered	Disconnect all devices, wait 10 seconds, restart unit, reconnect one device at a time.
Slow solar charging	Insufficient sunlight/panel angle	Reposition panel for direct sun; check connections.
LCD display blank	Sleep mode/backlight off	Press any button; adjust brightness in settings.
Overheating	High ambient temp/overload	Move to cooler location; reduce load; ensure ventilation.
USB-C not fast charging	Incompatible cable/device	Use certified USB-C PD cable; check device compatibility.

Reset: Press and hold POWER + SETUP for 10 seconds to factory reset.

Service: 1-800-555-0123; www.solaireenergy.com/support