Smart Solar 2150PKD-G Quick Start Manual

The Smart Solar 2150PKD-G is a 2150W portable solar generator kit designed for off-grid power, emergency backup, and outdoor activities. It features a high-capacity lithium-ion battery, pure sine wave AC inverter, multiple output ports (AC, DC, USB), MPPT solar charge controller, LCD display for system monitoring, and overload protection. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Unpacking and Inspection 3. Initial Setup and Charging 4. Specifications 5. Controls and Indicators 6. Connecting Solar Panels 7. Powering Devices 8. Battery Management 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Power Station Unit, Solar Panel(s), AC Adapter, Car Charging Cable, User Manual.

Feature	Description
AC Output	2 x 120V AC outlets (2150W total, 4500W surge)
DC Output	12V/10A car port, 2 x 5.5mm DC ports
USB Output	4 x USB-A (5V/2.4A), 2 x USB-C PD (60W max)
Solar Input	MPPT controller, max 500W solar input
LCD Display	Shows battery level, input/output power, warnings
Battery	Lithium-ion, 2000Wh capacity
Inverter	Pure sine wave, 90% efficiency
Cooling	Quiet fan with auto temperature control
Protections	Overload, short circuit, over-temperature, low voltage
Weight	Approx. 45 lbs (20.4 kg)

Unpacking and Inspection

Unpack all components and inspect for damage.

Check contents: Power station, solar panel(s), AC adapter, car charger cable, user manual.
Inspect for physical damage: Cracks, dents, or loose parts.
Place on stable, dry surface away from direct sunlight and moisture.
Ensure ventilation ports are unobstructed.

WARNING! Do not use if any component is damaged. Contact support immediately.

Initial Setup and Charging

Charge the power station fully before first use.

AC Charging: Connect AC adapter to AC input port and wall outlet. LCD will show charging status.
Solar Charging: Connect solar panel(s) to solar input port(s) using provided cables.
Car Charging: Connect car charger cable to DC input port and vehicle's 12V outlet.
Monitor: LCD displays battery percentage. Full charge takes 6-8 hours via AC.

CAUTION! Use only provided or approved charging accessories. Do not charge in extreme temperatures.

Specifications

Battery Capacity: 2000Wh (Lithium-ion).
AC Output: 120V, 60Hz, 2150W continuous, 4500W surge.
DC Output: 12V/10A (car port), 12V/5A (DC ports).
USB Output: USB-A: 5V/2.4A; USB-C PD: up to 60W.
Solar Input: 11-60VDC, 500W max, MPPT efficiency >95%.
AC Charging Input: 120V AC, 60Hz, 300W max.
Car Charging Input: 12V/24V DC, 10A max.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Storage Temp: -4°F to 113°F (-20°C to 45°C).
Dimensions: 15.7" x 10.2" x 11.8" (400 x 260 x 300 mm).

Controls and Indicators

Front Panel: Power Button, LCD Display, Output Ports.

LCD Display Icons: Battery percentage, Input/Output power (W), Warning symbols (overload, high temp), Charging status.

Power Button: Press to turn AC/DC outputs on/off. Hold for 3 seconds to turn on/off entire unit.

USB Ports: Always active when unit is on. AC/DC Outputs: Controlled by power button.

Connecting Solar Panels

For optimal solar charging, connect compatible panels.

Ensure power station is off before connecting.
Use provided solar cables; connect panel's MC4 connectors to solar input port.
Align panel towards sun (angle approx. equal to latitude).
Turn on power station; LCD will show solar input power.

Tip: Use parallel connection for multiple panels; do not exceed 500W total input.

Powering Devices

Supports most household and outdoor electronics.

AC Devices: Plug into AC outlets (max 2150W total). Press power button to enable.
DC Devices: Plug 12V devices into car port or DC ports.
USB Devices: Connect phones, tablets, lights to USB ports.
Monitor Load: LCD shows total output power. Do not exceed 2150W.
Auto Shutdown: Unit turns off if overloaded or battery depleted.

WARNING! Do not connect high-surge devices (e.g., large motors) exceeding 4500W surge rating.

Battery Management

Maximize battery life with proper care.

Storage: Store at 50% charge if not used for >3 months. Recharge every 3 months.

Temperature: Avoid charging below 32°F (0°C) or above 104°F (40°C).

LCD Warnings: Low battery (<10%), over-temperature, overload. Address immediately.

Care & Storage

Keep unit clean and dry. Use soft, dry cloth for cleaning.

CAUTION! Do not immerse in water. Avoid exposure to rain, sand, or extreme heat. Store in cool, dry place.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. UL Certified: Meets safety standards. Copyright © 2025 Smart Solar; trademarks of Smart Solar Inc. For support, visit www.smartsolar.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Battery depleted/unit off	Charge battery; press power button to turn on outputs.
Solar not charging	Poor sunlight/connections	Ensure full sun; check cable connections; verify panel orientation.
Overload warning	Connected device exceeds rating	Disconnect device; reduce total load below 2150W.
High temperature warning	Overheating	Turn off unit; move to cooler location; ensure ventilation.
LCD not displaying	Battery critically low	Charge immediately via AC or car charger.

Reset: Turn off unit, disconnect all devices, wait 1 minute, then restart.

Service: 1-800-555-1234; www.smartsolar.com