Selectblinds Architect Light Filtering Panel Track Installation-Care Instructions

The Selectblinds Architect Light Filtering Panel Track is a modern window treatment system featuring light-filtering fabric panels that glide smoothly on a ceiling or wall-mounted track. Designed for wide windows and sliding glass doors, it offers adjustable light control, easy operation, and a clean architectural look. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Mounting Options 7. Panel Adjustment & Light Control 8. Safety Features 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Light Filtering Fabric Panels, Aluminum Track System, Mounting Brackets, Gliders/Carriers, Cord or Wand Control, End Stops.

Feature	Description
Light Filtering Fabric	Diffuses natural light while maintaining privacy
Panel Track System	Smooth gliding aluminum track for ceiling or wall mount
Mounting Brackets	For secure installation on various surfaces
Gliders/Carriers	Attach to panels for easy movement along track
Cord or Wand Control	For opening and closing panels
End Stops	Prevent panels from sliding off track ends
Adjustable Width	Track can be cut to fit window width
Overlap Joint	Ensures light gap coverage when closed
Child Safety	Cord tension device or wand option available
Reversible Panels	Some fabrics are reversible for dual looks

Installation

Unpack and verify all parts. Read instructions before beginning.

Measure window: Determine track length needed; cut track if required.
Mark bracket locations: Use level to ensure track will be straight.
Install brackets: Secure to ceiling or wall with appropriate hardware.
Attach track: Snap or screw track into mounted brackets.
Install panels: Attach gliders to panel tops, then hang panels on track.
Add end stops: Secure stops at each track end.
Test operation: Slide panels to ensure smooth movement.

WARNING! Use proper tools and hardware for your wall/ceiling type (drywall, concrete, wood). Ensure brackets are securely anchored to support weight.

First-Time Setup

After installation, adjust for proper operation.

Align panels: Ensure panels hang straight and evenly.
Adjust gliders: Check that all gliders move freely without binding.
Set overlap: Adjust panel overlap at center for light gap coverage.
Install cord tension device: If using corded control, install safety device per instructions.
Test full range: Open and close fully to verify smooth operation.

CAUTION! Do not force panels if they bind. Check for obstructions in track.

Specifications

Panel Material: Light filtering polyester or polyester-cotton blend.
Track Material: Anodized aluminum.
Mounting: Ceiling or wall mount.
Control Options: Cord loop, wand, or motorized (if applicable).
Light Filtering: Softens light, reduces glare, maintains outside view.
Panel Width: Standard sizes (e.g., 20", 24", 30") or custom cut.
Weight Capacity: Track supports up to specified weight per linear foot.
Operating Temp: Standard indoor conditions.

Controls and Operation

Operate panels via cord or wand.

Cord Control: Pull cord to move panels; ensure cord is kept taut and out of reach of children.

Wand Control: Rotate wand to open/close; tilt wand to adjust panel alignment.

To open: Slide panels to one side or split to center. To close: Slide panels across window coverage area. For light adjustment: Position panels to desired openness for filtered light.

Mounting Options

Ceiling Mount: Brackets attached to ceiling joists or suitable support. Wall Mount: Brackets attached to wall studs or using anchors.

Determine mount type based on window and room configuration.
Use appropriate hardware (included or recommended).
For heavy installations, consult professional if unsure of support.

Tip: For bay windows, additional brackets may be needed at joints.

Panel Adjustment & Light Control

Panels filter light while providing privacy.

Light filtering: Fabric diffuses sunlight, reducing glare while allowing soft light.
Privacy: Provides daytime privacy; at night with interior lights on, consider adding liner.
Adjustment: Slide panels to cover desired window area; partial coverage allows light in from sides.
Overlap: Ensure center overlap is sufficient to minimize light gap.

WARNING! Do not exceed recommended number of panels per track length to avoid strain.

Safety Features

Cord Safety: Includes tension device to keep cord taut and out of reach; comply with child safety standards. Wand Option: Available for cord-free operation. Secure Mounting: Brackets designed to support weight; use all provided hardware.

Care & Cleaning

Regular dust with soft brush or vacuum with brush attachment. For spots, use mild soap and water on damp cloth; do not soak fabric. Do not machine wash or dry clean unless specified. Wipe track with dry cloth.

CAUTION! Do not use harsh chemicals, bleach, or abrasive cleaners. Avoid excessive moisture.

Warranty Information

Selectblinds products come with limited warranty; see warranty card for details. Warranty covers defects in materials and workmanship under normal use. For support, visit www.selectblinds.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Panels not sliding smoothly	Track obstruction or misalignment	Check track for debris; ensure track is level and straight.
Panels sagging or uneven	Gliders not properly attached	Reattach gliders evenly; ensure all clips are secure.
Gap between panels when closed	Overlap not adjusted	Adjust panel overlap at center; check alignment.
Track coming loose	Brackets not securely fastened	Reinforce bracket mounting with appropriate hardware.
Cord tangled or loose	Cord tension device needs adjustment	Adjust tension device; keep cord taut.

Professional Help: For complex installations or persistent issues, consult professional installer.

Service: www.selectblinds.com; customer service contact from website.