Rollei Solar Panel 100 Manual

The Rollei Solar Panel 100 is a portable, high-efficiency solar charging solution designed for outdoor enthusiasts, photographers, and travelers. It features 100W of peak power output, multiple USB ports (including USB-C PD), a durable and weather-resistant design, and smart charging technology compatible with a wide range of devices from cameras and drones to smartphones and power banks. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-efficiency monocrystalline solar cells, Integrated kickstand, Multiple output ports, LED power/status indicator, Durable carrying handle, and Weather-resistant construction.

Package Contents

Unpack and verify all items are present.

1. Rollei Solar Panel 100 (folded)
2. DC Output Cable (with alligator clips)
3. Carrying/Storage Bag
4. Quick Start Guide (this manual)
5. Warranty Card

WARNING! Inspect the panel for any visible damage before first use. Do not use if the surface is cracked or the ports are damaged.

Safety Information

Read all safety instructions before operation.

1. Electrical Safety: Do not expose ports or cables to water or moisture. Use only in dry conditions.
2. Heat & Sunlight: The panel surface can become very hot. Avoid touching during operation. Do not leave devices on the panel.
3. Compatibility: Ensure your device's input voltage/current is within the panel's output specifications.
4. Children & Pets: Keep away from children and pets. The cables pose a tripping hazard.
5. Storage: Store in a cool, dry place away from direct sunlight when not in use.

CAUTION! Never look directly at the sun or point reflective surfaces at the panel. Do not attempt to disassemble or repair the unit.

Specifications

• Model: Rollei Solar Panel 100
• Cell Type: High-Efficiency Monocrystalline Silicon
• Max Power (Pmax): 100W
• Open Circuit Voltage (Voc): 21.6V
• Short Circuit Current (Isc): 5.8A
• Output Ports: 2x USB-A (5V/2.4A), 1x USB-C PD (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A), 1x DC (12V/5A)
• Operating Temperature: -10°C to 60°C
• Storage Temperature: -20°C to 45°C
• Weather Rating: IPX4 (Splash Proof)
• Warranty: 24 Months

First-Time Setup & Connection

Unfold the panel and position it for optimal sunlight.

1. Unfold: Lay the panel flat on a stable, clean surface. Deploy the integrated kickstand.
2. Position: Angle the panel directly towards the sun (see Section 7).
3. Connect Device: Use the appropriate cable for your device (not all included). Plug into the correct port.
4. Check Indicator: The LED indicator will light up, showing charging status.

Tip: For first use, charge a power bank first to test output before connecting sensitive electronics like laptops.

Charging Your Devices

Follow these steps for safe and efficient charging.

1. Smartphones/Tablets (USB-A): Use a standard USB-A to Lightning/USB-C cable. Plug into either USB-A port.
2. Laptops/Drones (USB-C PD): Use a USB-C to USB-C cable supporting PD. Plug into the USB-C PD port.
3. Power Stations/12V Devices (DC): Use the included DC cable. Connect the alligator clips to the correct terminals on your power station or device.
4. Multiple Devices: You can charge up to 4 devices simultaneously, but total output will be shared and may reduce charging speed.

Note: Charging speed depends on sunlight intensity, angle, and device compatibility. Cloudy days will reduce output.

Optimal Positioning & Sunlight

Maximize power output with correct panel orientation.

1. Time of Day: Peak sunlight is between 10 AM and 2 PM.
2. Angle: Adjust the kickstand so the panel faces the sun at a 90-degree angle if possible.
3. Clear Path: Ensure no shadows from trees, buildings, or yourself fall on the panel.
4. Clean Surface: Wipe dust or debris from the solar cells before charging.

WARNING! Do not walk on or place heavy objects on the panel. Avoid sharp objects.

LED Indicator Guide

The LED light next to the ports shows system status.

Care, Storage & Maintenance

Proper care extends the lifespan of your solar panel.

1. Cleaning: Use a soft, dry cloth to wipe the surface. For stubborn dirt, use a damp cloth and mild soap. Dry immediately.
2. Storage: Fold the panel neatly and store in the provided bag in a cool, dry place.
3. Inspection: Periodically check cables and ports for wear or damage.
4. Long-Term: If storing for months, ensure the panel is clean and dry, and store with a 50% charge in a connected power bank if possible.

CAUTION! Do not use abrasive cleaners, solvents, or high-pressure water. Do not fold when wet.

Warranty & Support

Rollei offers a 24-month warranty from the date of purchase against defects in materials and workmanship under normal use. This warranty does not cover damage from misuse, accidents, modifications, or exposure to liquids beyond the IPX4 rating. For warranty service or technical support, please have your proof of purchase ready.

Support Contact:
Website: www.rollei.com/support
Email: [email protected]
Phone: +1-800-555-ROL-LEI (International rates may apply)

Troubleshooting

Reset: Disconnect all devices, fold the panel, wait 60 seconds, then unfold and reconnect.

Service: For persistent issues, contact Rollei Support using the information in Section 11. Do not open the panel casing.