Reolink Solar Panel Quick Start Manual

The Reolink Solar Panel is a high-efficiency photovoltaic accessory designed to provide continuous power for compatible Reolink security cameras. It features weather-resistant construction, adjustable mounting brackets, and smart charging technology to maximize solar energy harvesting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Camera 7. Maintenance & Optimization 8. Safety Guidelines 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency solar panel, Weatherproof cable with connector, Adjustable mounting bracket, Power indicator LED.

Feature	Description
Solar Panel	Monocrystalline cells for high energy conversion
Weather Resistance	IP65 rated for outdoor use in various conditions
Adjustable Bracket	Allows optimal angle adjustment for sun exposure
Power Cable	Integrated weatherproof cable with camera connector
Smart Charging	Prevents overcharging and optimizes battery life
Power Indicator	LED shows charging status (green/red)
Compatibility	Designed for specific Reolink battery-powered cameras
Mounting Hardware	Includes screws, anchors, and installation tools
Operating Temperature	Wide range suitable for most climates
Dimensions	Compact design for discreet installation

Installation

Unpack and inspect contents. Choose optimal location for maximum sunlight.

Select location: Choose area with direct sunlight for at least 6 hours daily.
Mount bracket: Use included hardware to secure bracket to wall, roof, or pole.
Attach solar panel: Secure panel to bracket and adjust angle for optimal sun exposure.
Route cable: Run weatherproof cable to camera location, securing with clips if needed.
Connect to camera: Plug connector into camera's solar input port.

WARNING! Do not install near flammable materials. Ensure mounting surface is stable and secure.

First-Time Setup

After installation, verify proper operation and charging.

Check connections: Ensure cable is securely connected to both panel and camera.
Verify indicator: Power LED should show green (charging) or red (low power).
Monitor charging: Check camera battery level via Reolink app after 24 hours.
Adjust angle: Fine-tune panel angle based on seasonal sun position.
Test operation: Verify camera functions normally with solar power.

CAUTION! Do not bend or damage cable during installation. Keep connectors dry.

Specifications

Panel Type: Monocrystalline silicon.
Maximum Power: [e.g., 5W/6W/7W - varies by model].
Output Voltage: Optimized for Reolink camera batteries.
Weatherproof Rating: IP65.
Cable Length: [e.g., 3m/10ft standard].
Operating Temperature: -20°C to 60°C (-4°F to 140°F).
Dimensions: Varies by model (typically compact design).
Weight: Lightweight for easy installation.
Compatibility: Specific Reolink Argus, Go, or battery camera models.
Warranty: Limited warranty as per regional regulations.

Controls and Connections

Power Indicator LED: Green (normal charging), Red (low power/not charging), Off (no power).

Connections: Weatherproof connector to camera, Secure mounting bracket, Angle adjustment mechanism.

Monitoring: Check charging status via Reolink app battery indicator. Maintenance: Regular cleaning of panel surface. Safety: Built-in protection against reverse current and overvoltage.

Connecting to Camera

Compatible with specific Reolink battery cameras with solar input port.

Ensure camera is powered off during connection.
Locate solar input port on camera (typically weather-sealed).
Align connector and insert firmly until click is heard.
Secure weather cap if provided.
Power on camera and verify connection in Reolink app.

Tip: Route cable to avoid sharp edges and potential damage. Use included cable clips.

Maintenance & Optimization

Regular maintenance ensures optimal performance.

Clean panel: Wipe surface with soft, damp cloth every 3-6 months.
Check connections: Inspect cable and connectors for damage or corrosion.
Adjust seasonally: Change panel angle with seasonal sun position changes.
Monitor performance: Check battery levels regularly in Reolink app.
Trim vegetation: Keep area around panel clear of shading obstructions.

WARNING! Do not use abrasive cleaners or high-pressure water on panel.

Safety Guidelines

Electrical Safety: Do not open or modify panel. Installation Safety: Use proper ladder safety, wear protective gear. Environmental: Dispose of according to local electronic waste regulations.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. CE Marking: Complies with European directives. RoHS: Free of hazardous substances per directive. Copyright © Reolink. For support, visit support.reolink.com or contact regional support centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Not charging	Poor sunlight, dirty panel, connection issue	Clean panel, check connections, verify sunlight exposure.
Red indicator LED	Low power output	Reposition for better sun, check for shading.
Camera not recognizing	Loose connection, incompatible camera	Reconnect securely, verify compatibility.
Low charging efficiency	Wrong angle, seasonal changes	Adjust panel angle, clear obstructions.
Physical damage	Weather, impact	Contact support if panel is cracked or damaged.

Reset: Disconnect and reconnect cable. Restart camera via app.

Service: support.reolink.com; Check regional contact information.