Reolink Solar Panel Operational Instructions

The Reolink Solar Panel is a high-efficiency photovoltaic accessory designed to provide continuous, renewable power to compatible Reolink security cameras. It features weather-resistant construction, adjustable mounting brackets, and smart charging technology to optimize energy harvesting. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Adjustable mounting bracket, Waterproof cable and connector, Power indicator LED, Integrated charge controller.

Installation

Unpack and inspect contents. Choose location with maximum sunlight exposure.

1. Select mounting location: Ensure direct sunlight for at least 6 hours daily, free from shadows.
2. Mount the bracket: Use included screws to secure bracket to wall, pole, or roof.
3. Attach solar panel: Secure panel to bracket; adjust angle for optimal sun exposure (typically 30-45 degrees).
4. Route the cable: Secure cable along path to camera, avoiding sharp edges or pinch points.

WARNING! Do not install during thunderstorms. Ensure mounting surface is stable and can support panel weight.

First-Time Setup

Connect solar panel to compatible Reolink camera for automatic charging.

1. Power off camera: Ensure camera is turned off before connection.
2. Connect cable: Plug waterproof connector into solar input port on camera.
3. Verify connection: Ensure connector is fully seated and locked.
4. Power on camera: Turn on camera; check camera battery or power status in Reolink app.
5. Check indicator: Solar panel LED should light solid or blink to indicate charging.

CAUTION! Ensure all connections are dry and secure before powering on.

Specifications

• Panel Type: Monocrystalline Silicon.
• Maximum Power: [e.g., 5W / 12V].
• Open Circuit Voltage: [e.g., 21V].
• Short Circuit Current: [e.g., 0.3A].
• Operating Temperature: -20°C to 60°C (-4°F to 140°F).
• Waterproof Rating: IP65.
• Cable Length: [e.g., 3 meters / 9.8 feet].
• Connector: Waterproof DC plug.
• Dimensions: [e.g., 245mm x 190mm x 17mm].
• Weight: [e.g., 0.8 kg / 1.76 lbs].

Controls and Indicators

Solar panel features a single status LED indicator.

LED Indicator Behavior:

• Solid Green: Panel is receiving sunlight and charging normally.
• Slow Blinking Green: Charging in progress but light is insufficient (cloudy/dawn/dusk).
• No Light: No sunlight detected, or panel is not connected properly.

Note: There are no user controls on the panel itself. Charging is managed automatically by the integrated controller and the connected camera.

Connecting to Camera

Ensure compatibility between solar panel model and your Reolink camera.

1. Identify the solar input port on your Reolink camera (refer to camera manual).
2. Align the connector key and insert firmly until it clicks.
3. Secure the weatherproof seal by tightening the locking ring (if applicable).
4. In the Reolink app, navigate to the camera's device settings > power management to view solar charging status.

Tip: Route the cable to avoid water accumulation points and direct exposure to lawn mowers or trimmers.

Operation & Charging

The solar panel operates automatically when exposed to sunlight.

1. Automatic Charging: Once connected and in sunlight, the panel begins charging the camera's battery.
2. Optimal Angle: Adjust panel seasonally for best performance. Tilt more steeply in winter, less in summer.
3. Charging Status: Monitor battery level via the Reolink app. Charging speed depends on sunlight intensity.
4. Battery Protection: The integrated controller prevents overcharging and over-discharging.

WARNING! Do not disassemble the panel or attempt to repair the internal circuitry. Keep the connector clean and dry.

Maintenance & Cleaning

Regular maintenance ensures maximum efficiency.

1. Cleaning: Periodically clean the glass surface with a soft, damp cloth to remove dust, pollen, or bird droppings. Use mild soap if needed. Do not use abrasive cleaners.
2. Inspection: Check mounting hardware quarterly for tightness, especially after severe weather.
3. Cable Check: Inspect cable for damage, wear, or animal bites.
4. Winter Care: Snow may cover the panel. Gently brush off snow; do not use sharp tools or hot water.

CAUTION! Disconnect from camera before cleaning if possible. Do not spray water directly onto connectors.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © [Year] Reolink. All trademarks are the property of their respective owners. For technical support, warranty, and more information, visit the official Reolink website at https://support.reolink.com.

Troubleshooting

Reset: Disconnect solar panel from camera for 30 seconds, then reconnect.

Service: For persistent issues, contact Reolink Support via website or authorized service center. Do not open the panel casing.