Raygleam FOLDING SOLAR PANEL KIT User Manual

The Raygleam Folding Solar Panel Kit is a portable, high-efficiency solar charging solution designed for outdoor activities, emergencies, and off-grid power needs. It features monocrystalline solar cells, a built-in charge controller, multiple output ports (USB-A, USB-C, DC), foldable design with a carrying handle, integrated kickstand, and weather-resistant construction. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Connecting Devices 7. Charging Operation 8. Safety Features 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Foldable solar panel array, Integrated charge controller, Output ports (USB-A, USB-C, DC5521), Carrying handle, Adjustable kickstand, Storage pouch.

Feature	Description
Solar Cells	High-efficiency monocrystalline silicon
Output Ports	USB-A (5V/2.4A), USB-C (PD up to 18W), DC5521 (12V/5A)
Charge Controller	Built-in MPPT for optimal power conversion
Foldable Design	Compact folding for portability
Carrying Handle	Integrated for easy transport
Kickstand	Adjustable for optimal sun angle
Weather Resistance	IP65 rated for dust and water splashes
Indicator Lights	LEDs for power output and charging status
Storage Pouch	Included for protection during transport
Compatibility	Phones, tablets, power banks, 12V devices

Installation & Setup

Unpack and inspect all contents. Ensure all components are present and undamaged.

Unfold the solar panel: Release latches and gently unfold to full size.
Position for sunlight: Place on stable, flat surface facing direct sunlight.
Adjust kickstand: Set desired angle (typically 30-60 degrees).
Connect device: Use appropriate cable to connect device to output port.

WARNING! Do not expose to extreme temperatures or submerge in water. Keep away from flammable materials.

First-Time Use

Before first use, ensure proper setup and connection.

Check sunlight conditions: Ensure bright, direct sunlight for optimal performance.
Connect device: Plug your device into the appropriate output port.
Monitor indicators: Green LED indicates power output; flashing indicates charging.
Optimize angle: Adjust panel periodically to follow sun movement.

CAUTION! Do not look directly at the sun when positioning panel. Use gloves if panel becomes hot.

Specifications

Panel Type: Monocrystalline silicon.
Maximum Power: 100W (peak).
Open Circuit Voltage: 21V.
Short Circuit Current: 6.2A.
Output Ports: USB-A (5V/2.4A), USB-C PD (5V/9V/12V up to 18W), DC5521 (12V/5A).
Controller: Integrated MPPT charge controller.
Dimensions (Folded): 18 x 14 x 2 inches.
Dimensions (Unfolded): 36 x 28 inches.
Weight: 6.6 lbs.
Operating Temperature: -4°F to 140°F (-20°C to 60°C).
Weather Rating: IP65 (dust tight, protected against water jets).

Controls and Indicators

All controls and indicators are located on the charge controller module.

LED Indicators: Power Output (Green), Charging Status (Flashing Green), Fault (Red).

Output Ports: Clearly labeled USB-A, USB-C, DC5521.

Controller Functions: Over-current protection, Over-voltage protection, Short-circuit protection, Temperature compensation.

Connecting Devices

Connect compatible devices using appropriate cables.

Smartphones/Tablets: Use USB-A to Lightning or USB-C cable.
Power Banks: Connect to USB-A or USB-C port.
12V Devices: Use DC5521 to device-specific cable.
Multiple Devices: Can charge up to 3 devices simultaneously (within total power limit).

Tip: For fastest charging, use USB-C PD port with compatible devices.

Charging Operation

Optimal charging requires proper positioning and conditions.

Position in direct sunlight: Avoid shadows on any part of the panel.
Check connections: Ensure cables are fully inserted and undamaged.
Monitor device: Most devices will show charging indicator.
Adjust throughout day: Reposition every 2-3 hours for best results.
Disconnect: Unplug device when fully charged or when sunlight diminishes.

WARNING! Do not attempt to disassemble or modify the panel or controller. Risk of electric shock.

Safety Features

Built-in protections: Over-current, Over-voltage, Short-circuit, Reverse polarity protection, Temperature monitoring.

Automatic Shut-off: Controller will shut down output if voltage exceeds safe limits.

Thermal Protection: Reduces output if temperature exceeds 140°F (60°C).

Care & Storage

Proper maintenance ensures longevity and performance.

Cleaning: Use soft, damp cloth to clean panel surface. Do not use abrasive materials.
Storage: Fold properly, secure latches, store in included pouch in dry location.
Inspection: Regularly check for damage to cells, cables, or connectors.

CAUTION! Do not use harsh chemicals or high-pressure water. Store in cool, dry place away from direct sunlight when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. RoHS compliant. Copyright © 2025 Raygleam; all trademarks property of Raygleam Technologies Inc. For support, visit www.raygleam.com or contact 1-800-555-RAYG (7294).

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Insufficient sunlight	Move to brighter location; ensure direct sunlight.
Device not charging	Faulty cable/connection	Try different cable; ensure secure connection.
Red LED indicator	Over-current/voltage	Disconnect all devices; wait 5 minutes; reconnect.
Low charging speed	Panel angle/shading	Adjust angle; remove any shadows on panel.
Controller hot to touch	High ambient temperature	Move to shaded area; allow to cool before use.

Reset: Disconnect all devices, fold panel, wait 10 minutes, then redeploy.

Service: 1-800-555-RAYG (7294); www.raygleam.com/support