Pyle aqua sunblast PWR95S User Manual

The Pyle aqua sunblast PWR95S is a powerful 95-watt marine-grade waterproof Bluetooth speaker system designed for outdoor and marine use. It features Bluetooth wireless streaming, AM/FM radio, USB/SD card playback, auxiliary input, built-in microphone for hands-free calling, IPX5 waterproof rating, shockproof and rustproof construction, LED lighting effects, and remote control. Powered by 12V DC or included AC adapter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Waterproof speaker enclosure, Control Panel, Remote Control, Power Input, Antenna connector, USB/SD card slots, AUX input, LED light controls.

Installation

Unpack and inspect contents. Choose appropriate mounting location.

1. Select mounting location: Choose flat, stable surface on boat, patio, or wall.
2. Mount bracket: Use included hardware to secure mounting bracket.
3. Attach speaker: Slide speaker onto bracket and secure with locking knob.
4. Connect power: Connect 12V DC power cable to appropriate power source.
5. Connect antenna: Attach included AM/FM antenna for radio reception.

WARNING! Ensure mounting surface can support speaker weight. Keep away from direct heat sources.

First-Time Setup

Connect power and follow initial setup procedure.

1. Power connection: Connect to 12V DC power source or use included AC adapter.
2. Initial power on: Press POWER button on control panel or remote.
3. Bluetooth pairing: Enter pairing mode by pressing Bluetooth button; search for "Pyle PWR95S" on your device.
4. Radio setup: Extend antenna fully for best reception; use auto-scan to find stations.
5. LED light setup: Press LIGHT button to cycle through lighting modes.

CAUTION! Ensure all connections are dry before applying power. Do not submerge control panel.

Specifications

• Power Output: 95 Watts RMS.
• Speaker Configuration: 2-way full range speakers.
• Bluetooth Version: 5.0 with A2DP profile.
• Frequency Response: 80Hz - 18kHz.
• Waterproof Rating: IPX5 (protected against water jets).
• Inputs: Bluetooth, AM/FM, USB, SD card, AUX 3.5mm.
• Power Requirements: 12V DC, 5A or 110-240V AC via adapter.
• Dimensions: 12" x 8" x 6".
• Weight: 8.8 lbs.
• Operating Temperature: -10°C to 50°C (14°F to 122°F).

Controls and Settings

Control Panel: POWER, MODE, VOLUME UP/DOWN, PLAY/PAUSE, TRACK UP/DOWN, LIGHT, MENU.

Remote: POWER, MODE, VOLUME, MUTE, PLAY/PAUSE, TRACK, LIGHT, MENU, NUMERIC buttons.

Mode Selection: Cycle through Bluetooth, AM Radio, FM Radio, USB, SD Card, AUX. Volume Control: Adjust from 0-30. Light Controls: Press LIGHT to cycle through 7 colors and 4 patterns. Menu Settings: Access equalizer presets (ROCK, POP, CLASSIC, JAZZ, FLAT), radio station memory, Bluetooth pairing reset. Display: Shows mode, track number, volume level, radio frequency.

Connecting Devices

Bluetooth: Wireless pairing. AUX: 3.5mm cable. USB/SD: Direct playback.

1. Turn on speaker and select appropriate mode.
2. For Bluetooth: Enable Bluetooth on device and select "Pyle PWR95S".
3. For AUX: Connect 3.5mm cable from device to AUX input.
4. For USB/SD: Insert media into appropriate slot; system will auto-detect.

Tip: Ensure USB/SD cards are formatted as FAT32 and contain supported audio files.

Playing Media

Supports MP3 and WMA audio files from USB/SD, Bluetooth streaming, and AM/FM radio.

1. Select source: Press MODE to choose Bluetooth, AM, FM, USB, SD, or AUX.
2. Playback: Press PLAY/PAUSE to start/stop playback.
3. Track navigation: Use TRACK UP/DOWN to skip tracks or scan radio stations.
4. Volume adjustment: Use VOLUME buttons or remote.
5. Light control: Press LIGHT to change color and pattern.
6. Equalizer selection: Press MENU and navigate to EQ settings.
7. Radio memory: In radio mode, press and hold numeric button to save station.

WARNING! Do not remove USB/SD card during playback. Allow wet surfaces to dry before touching controls.

Bluetooth Pairing

Hands-free calling and audio streaming capability.

1. Ensure speaker is in Bluetooth mode (blue LED flashing).
2. Enable Bluetooth on your smartphone/tablet.
3. Search for available devices and select "Pyle PWR95S".
4. Enter pairing code if prompted (default: 0000 or 1234).
5. Once connected, blue LED will stay solid.
6. For calls: Answer with PLAY/PAUSE button; end call with same button.

Note: Speaker can remember up to 8 paired devices. Clear pairing list by holding Bluetooth button for 10 seconds.

Care & Cleaning

Disconnect power before cleaning. Use mild soap and water on exterior only.

1. Exterior cleaning: Wipe with damp cloth; mild soap if necessary.
2. Grille cleaning: Use soft brush to remove dust from speaker grille.
3. Connection ports: Keep free of debris; use compressed air if needed.
4. Storage: Store in dry location when not in use for extended periods.

CAUTION! Do not use harsh chemicals or abrasives. Do not open enclosure - no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian EMI regulations. Bluetooth®: Bluetooth word mark and logos are registered trademarks. IP Rating: IPX5 certified against water jets. Copyright © 2023 Pyle Audio; trademarks of Pyle Audio, Inc. For support, visit www.pyleaudio.com or contact 1-800-431-6699.

Troubleshooting

Reset: Hold POWER and MODE for 10 seconds to factory reset.

Service: 1-800-431-6699; www.pyleaudio.com