Prouser SCP30 Operating Manual

The Prouser SCP30 is a professional-grade smart control panel designed for industrial automation and building management systems. It features a 7-inch capacitive touchscreen, multi-protocol communication support (Modbus, BACnet, KNX), integrated IoT connectivity, programmable logic control, real-time monitoring, alarm management, and remote access capabilities. Powered by 24V DC with optional PoE, it operates in temperatures from -10°C to 55°C. Below are key sections for safety, features, installation, configuration, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 7-inch capacitive touchscreen, Ethernet port, RS-485 communication ports, digital I/O terminals, relay outputs, USB configuration port, SD card slot for data logging.

Installation

Unpack and inspect contents. Mount in approved enclosure or panel.

1. Mounting: Secure to DIN rail or panel using provided brackets.
2. Power connection: Connect 24V DC to terminals (+V, GND) or use PoE via Ethernet port.
3. Field wiring: Connect digital inputs, relay outputs, and communication cables to appropriate terminals.
4. Network connection: Connect Ethernet cable for network communication.

WARNING! Ensure power is disconnected during installation. Use proper wire gauges and follow local electrical codes.

First-Time Setup

Apply power; follow initial setup wizard on touchscreen.

1. Language selection: Choose interface language (default: ENGLISH).
2. Network configuration: Set IP address (DHCP or static).
3. Protocol configuration: Select primary communication protocol (Modbus RTU/TCP, BACnet MS/TP, KNX).
4. User accounts: Create administrator and operator accounts.
5. I/O configuration: Map digital inputs and relay outputs to points.

CAUTION! Secure all connections properly. Test inputs and outputs before placing in service.

Specifications

• Display: 7-inch TFT LCD, capacitive touch, 800x480 pixels.
• Processor: ARM Cortex-A7, 1 GHz.
• Memory: 512 MB RAM, 4 GB flash storage.
• Communication: Ethernet 10/100, RS-485 (2 ports), USB 2.0 host.
• Digital Inputs: 8 channels, 24V DC, optically isolated.
• Relay Outputs: 4 channels, 5A @ 250V AC, 30V DC.
• Power Supply: 24V DC ±10% or PoE (802.3af).
• Operating Temperature: -10°C to 55°C (14°F to 131°F).
• Enclosure Rating: IP54 front panel.

Controls and Interface

Access interface via touchscreen or web browser. Front Panel: POWER, MENU/ENTER, PROTOCOL SELECT, ALARM SILENCE.

Touchscreen Interface: Home screen with status overview, Navigation menu, Alarm panel, Configuration pages, Real-time trends.

Configuration: Network settings, Protocol configuration, I/O mapping, User management, Alarm setup. Monitoring: Real-time values, Historical trends, Alarm history, System status. Control: Manual override of outputs, Setpoint adjustments, Schedule programming.

Connecting Devices

Field devices: Connect sensors to digital inputs. Actuators: Connect to relay outputs. Network: Ethernet to switch or directly to controller.

1. Turn off power before making connections.
2. Connect field wiring to appropriate terminals (see terminal labeling).
3. Ensure proper polarity for DC connections.
4. Use shielded cables for communication ports and ground shield at one end.

Tip: Label all wires for easy identification during maintenance.

Programming and Configuration

Supports ladder logic programming and configuration via USB or network.

1. Connect programming device: Use USB cable or network connection.
2. Launch configuration software: Use Prouser ConfigTool (version 3.2 or later).
3. Download project: Transfer configuration to SCP30.
4. Monitor operation: View real-time values and status.
5. Data logging: Configure SD card for historical data recording.
6. Alarm setup: Define alarm conditions and notifications.
7. Scheduling: Create time-based control schedules.
8. User management: Define access levels and permissions.

WARNING! Backup configuration before making changes. Test in simulation mode first.

Security Features

User Authentication: Multi-level access (Administrator, Operator, Viewer). Network Security: HTTPS, SSH, IP filtering. Data Protection: Configuration encryption, audit logging.

Care & Maintenance

Disconnect power before maintenance. Clean screen with soft, dry cloth only. Periodically check connections for tightness.

CAUTION! Do not use chemicals or abrasive cleaners. Keep away from excessive dust and moisture.

Regulatory Information

FCC Part 15: Class A digital device; complies with limits for industrial environments. CE Marked: Complies with EU directives. UL Listed: UL 508 industrial control equipment. Copyright © 2023 Prouser Controls Inc.; all rights reserved. For technical support, visit www.prousercontrols.com/support or contact 1-800-555-1234.

Troubleshooting

Reset: Hold MENU button for 10 seconds during power-up for factory reset.

Service: 1-800-555-1234; www.prousercontrols.com/support