Powertraveller Solargorilla User Manual

The Powertraveller Solargorilla is a high-performance portable solar charger designed for charging laptops, tablets, smartphones, and other USB-powered devices. Featuring durable solar panels, multiple output ports, built-in battery storage, intelligent charging technology, weather-resistant construction, and foldable design for portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency solar panels, Power Indicator LEDs, USB Output ports, DC Output port, Battery Status button, Foldable design with carrying handle.

Installation

Unpack and inspect contents. Ensure all components are present.

1. Unfold solar panels: Open the Solargorilla completely and lay flat.
2. Position for sunlight: Place in direct sunlight at optimal angle (approx. 30-45 degrees).
3. Connect to device: Use appropriate cable for your device (USB or DC).
4. Monitor charging: Check LED indicators for charging status.

WARNING! Do not expose to extreme temperatures. Keep away from water when ports are exposed.

First-Time Setup

Initial charging and configuration.

1. Fully charge built-in battery: Connect to AC adapter or place in direct sunlight for 8-10 hours.
2. Check battery level: Press Battery Status button to view LED indicators.
3. Connect first device: Use included cables to connect smartphone or tablet.
4. Verify charging: Ensure device shows charging icon and Solargorilla LEDs indicate active charging.

CAUTION! First charge may take longer. Ensure proper sunlight exposure for optimal performance.

Specifications

• Solar Panel Type: Monocrystalline silicon.
• Power Output: 20W peak power.
• Battery Capacity: 10,000mAh built-in lithium-ion battery.
• Output Ports: 2x USB (5V/2.4A each), 1x DC (12-20V adjustable).
• Charging Time: 6-8 hours in optimal sunlight conditions.
• Device Compatibility: Laptops, tablets, smartphones, cameras, GPS devices.
• Operating Temperature: -10°C to 60°C (14°F to 140°F).
• Dimensions (Folded): 280 x 180 x 25 mm.
• Weight: 1.2 kg (2.6 lbs).
• Warranty: 12 months from date of purchase.

Controls and Settings

Power Indicator LEDs: Show charging status (red=charging, green=fully charged, blinking=error). Battery Status Button: Press to check remaining capacity (4 LEDs = 100-75%, 3 LEDs = 75-50%, 2 LEDs = 50-25%, 1 LED = 25-0%).

Charging Modes: Standard USB mode (5V/2.4A), Fast Charge mode (for compatible devices), DC mode (adjustable voltage for laptops).

Settings: No user-configurable settings. Device automatically detects optimal charging current.

Connecting Devices

USB Devices: Use standard USB cable. Laptops: Use appropriate DC tip adapter.

1. Ensure Solargorilla has sufficient charge (check LED indicators).
2. Connect device cable to appropriate output port.
3. Connect other end to your device.
4. Charging should begin automatically (device will show charging indicator).

Tip: For fastest charging, ensure Solargorilla is in direct sunlight while charging devices.

Charging Operation

Supports simultaneous charging of multiple devices.

1. Solar Charging: Place in direct sunlight, connect device, charging begins automatically.
2. Battery Charging: Charge built-in battery first, then use stored energy to charge devices.
3. Dual Device Charging: Connect two USB devices simultaneously (total output shared).
4. Laptop Charging: Use DC output with correct voltage setting for your laptop model.
5. Monitoring: LED indicators show charging progress and battery status.
6. Auto-shutoff: Stops charging when device battery is full to prevent overcharging.
7. Low-power mode: Reduces output when battery level is critically low.

WARNING! Do not attempt to charge devices requiring more than 20W total. Overloading may damage the unit.

Solar Panel Usage

Optimal positioning and maintenance for maximum efficiency.

1. Sunlight Exposure: Place in direct, unobstructed sunlight.
2. Angle Adjustment: Tilt panels toward the sun (approximately equal to your latitude).
3. Cleaning: Keep solar panels clean and free of dust, dirt, and debris.
4. Shading Avoidance: Ensure no shadows fall on any part of the solar panels.
5. Weather Protection: While weather-resistant, avoid prolonged exposure to heavy rain.

Note: Charging efficiency reduces in cloudy conditions. Expect longer charging times.

Care & Cleaning

Disconnect all devices before cleaning. Use soft, dry cloth for solar panels. For stubborn dirt, use damp cloth with mild soap solution, then dry immediately.

CAUTION! Never use abrasive cleaners or solvents. Do not submerge in water. Store in cool, dry place when not in use.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. FCC Part 15: Class B digital device. Copyright © 2023 Powertraveller International Ltd. For support, visit www.powertraveller.com or contact [email protected]. Dispose of properly according to local electronic waste regulations.

Troubleshooting

Reset: Disconnect all devices, place in direct sunlight for 1 hour, then reconnect.

Service: [email protected]; www.powertraveller.com/support