Pni IP774 User Manual

The Pni IP774 is a high-performance industrial-grade IP camera designed for professional surveillance applications. It features 4K Ultra HD resolution, advanced night vision with IR LEDs, wide dynamic range (WDR), intelligent motion detection, PoE (Power over Ethernet) support, weatherproof IP67-rated housing, two-way audio, microSD card slot for local storage, and ONVIF compliance for easy integration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 4K CMOS sensor, IR-cut filter, built-in microphone and speaker, RJ45 Ethernet port, reset button, DC power input, microSD card slot, mounting bracket.

Feature	Description
4K Ultra HD	3840x2160 resolution for crystal clear images
Night Vision	Up to 30 meters with built-in IR LEDs
Wide Dynamic Range	Balances bright and dark areas in challenging lighting
PoE Support	IEEE 802.3af for single-cable power and data
Weatherproof	IP67-rated for indoor/outdoor use
Two-way Audio	Built-in microphone and speaker for communication
Local Storage	microSD card slot supports up to 256GB
Motion Detection	Intelligent alerts with customizable zones
ONVIF Compliance	Ensures compatibility with various NVR systems
DC Power Input	12V DC alternative power option

Installation

Unpack and inspect contents. Choose appropriate mounting location.

1. Mount camera: Attach bracket to wall/ceiling using included screws.
2. Connect network: Use Ethernet cable to connect RJ45 port to PoE switch or injector.
3. Connect power: If not using PoE, connect 12V DC power adapter.
4. Insert microSD card: For local recording (optional).
5. Adjust lens angle: Loosen adjustment screws, set viewing angle, then tighten.

WARNING! Ensure mounting surface can support camera weight. Use weatherproof connectors for outdoor installations.

First-Time Setup

Power on camera; access via web browser or mobile app.

1. Find camera IP: Use manufacturer's discovery tool or check router DHCP client list.
2. Login: Open browser, enter camera IP, use default credentials (admin/admin).
3. Change password: Immediately set strong admin password in System settings.
4. Configure network: Set static IP or keep DHCP as needed.
5. Adjust video settings: Set resolution, frame rate, bitrate according to needs.
6. Set time/date: Configure NTP server for accurate timestamping.

CAUTION! Change default passwords immediately. Keep firmware updated.

Specifications

• Image Sensor: 1/2.8" 4K CMOS.
• Resolution: 3840x2160 @ 20fps.
• Lens: 4mm fixed lens (2.8mm/6mm options available).
• Night Vision: IR LEDs with 30m range.
• WDR: 120dB for challenging lighting.
• Compression: H.265/H.264/MJPEG.
• Network: 10/100M Ethernet, PoE (802.3af).
• Audio: Built-in microphone and speaker.
• Storage: microSD card up to 256GB.
• Power: PoE or 12V DC.
• Operating Temp: -30°C to 60°C.
• Weatherproof: IP67-rated.

Controls and Settings

Access via web interface or mobile app. Physical controls: Reset button.

Web Interface: Video settings, Network configuration, Event settings, System maintenance, User management.

Video: Resolution, Frame rate, Bitrate, Brightness, Contrast, Saturation, Sharpness, WDR, BLC. Network: IP address, Subnet mask, Gateway, DNS, HTTP/RTSP ports. Events: Motion detection zones, sensitivity, schedule, alert actions. System: Time settings, Firmware upgrade, Factory reset, Log viewing. Users: Add/remove users, set permissions.

Connecting Devices

Network: Ethernet to PoE switch/injector. NVR: Connect via ONVIF protocol. Mobile: Use manufacturer's app.

1. Ensure camera is powered and network-connected.
2. For NVR: Enable ONVIF in camera settings, add camera to NVR using ONVIF protocol.
3. For mobile: Download app, scan QR code or enter camera UID.
4. For web access: Enter camera IP in browser address bar.

Tip: Use quality Ethernet cables (Cat5e or higher) for reliable connections.

Network Configuration

Supports static IP, DHCP, PPPoE, and UPnP.

1. Access network settings via web interface.
2. Choose IP configuration: DHCP for automatic, static for fixed address.
3. Set ports: Default HTTP 80, RTSP 554 (change for security).
4. Configure DDNS: For remote access without static IP.
5. Set QoS: Prioritize video traffic if network congestion occurs.
6. Configure firewall: Allow necessary ports if behind firewall.
7. Test connection: Use ping or connection test tool.

WARNING! Change default ports for enhanced security. Use strong passwords.

Advanced Features

Motion Detection: Draw zones, set sensitivity, configure alerts (email, FTP, push). Privacy Masking: Block sensitive areas from viewing/recording. Two-way Audio: Enable in audio settings, adjust volume. Smart IR: Automatically adjusts IR intensity based on distance. Alarm I/O: Connect external sensors/alarms (requires compatible model).

Care & Maintenance

Regularly clean lens with soft, dry cloth. Check housing seals annually. Ensure ventilation around camera. Update firmware regularly.

CAUTION! Do not use chemicals or abrasive materials on lens. Power off before cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European compliance. IP67 certification for dust and water resistance. RoHS compliant. Copyright © 2023 Pni Security Systems; all rights reserved. For support, visit www.pnisecurity.com or contact 1-800-555-7742.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No video image	Power/network issues	Check power and Ethernet connections; verify PoE switch is working.
Cannot access web interface	IP address/network	Verify camera IP; ensure computer is on same subnet; disable firewall temporarily.
Poor night vision	Obstructions/reflections	Clean lens; ensure no nearby objects reflecting IR light; check IR LED status.
Motion alerts not working	Settings/sensitivity	Verify motion detection is enabled; adjust sensitivity; check alert settings.
microSD card not recognized	Card format/compatibility	Format card as FAT32/exFAT; ensure compatible card (Class 10 or higher).
Audio issues	Settings/connections	Enable audio in settings; check volume levels; verify network bandwidth.

Reset: Press and hold reset button for 10 seconds to restore factory defaults.

Service: 1-800-555-7742; www.pnisecurity.com