Pni IP74 Live Manual

The Pni IP74 Live is a professional-grade IP camera designed for high-resolution live streaming and surveillance applications. It features 4K Ultra HD resolution, advanced night vision, motion detection, two-way audio, weatherproof housing, Power over Ethernet (PoE), ONVIF compliance, and remote access via mobile app and web interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 4K Ultra HD sensor, IR LEDs for night vision, built-in microphone and speaker, PoE port, reset button, SD card slot, mounting bracket.

Feature	Description
4K Ultra HD	3840 x 2160 resolution for crystal clear video
Night Vision	Up to 30 meters with IR LEDs
Two-Way Audio	Built-in microphone and speaker for communication
Power over Ethernet (PoE)	Single cable for power and data transmission
Weatherproof Housing	IP67 rated for indoor/outdoor use
Motion Detection	Customizable zones with push notifications
ONVIF Compliance	Compatible with third-party NVR systems
Mobile App Access	Remote viewing via iOS and Android apps
SD Card Slot	Local storage up to 256GB
Wide Dynamic Range	Balances light in high-contrast scenes

Installation

Unpack and inspect contents. Choose optimal location for surveillance coverage.

1. Mount camera: Use included bracket to secure to wall or ceiling.
2. Connect network: Use Ethernet cable to connect PoE port to router or PoE switch.
3. Power connection: If using PoE, no separate power adapter needed.
4. Adjust angle: Loosen bracket screws to position camera, then tighten.

WARNING! Ensure mounting surface is stable. Use appropriate tools for secure installation.

First-Time Setup

Power on camera; follow setup wizard via web interface or mobile app.

1. Find camera: Use Pni Discovery Tool to locate camera on network.
2. Access web interface: Enter camera IP address in browser.
3. Initial login: Use default credentials (admin/admin) and change immediately.
4. Configure network: Set static IP or use DHCP as needed.
5. Set time zone: Configure NTP server for accurate timestamp.
6. Adjust video settings: Set resolution, frame rate, and compression.

CAUTION! Change default password immediately to prevent unauthorized access.

Specifications

• Sensor: 1/2.8" CMOS, 8MP.
• Resolution: 4K Ultra HD (3840 x 2160).
• Lens: 4mm fixed, 90° viewing angle.
• Night Vision: IR LEDs up to 30m.
• Audio: Two-way with noise reduction.
• Network: 10/100 Mbps Ethernet, PoE (802.3af).
• Storage: MicroSD up to 256GB, cloud optional.
• Weatherproof: IP67 rated.
• Operating Temp: -20°C to 50°C.
• Power: PoE or 12V DC.

Controls and Settings

Access settings via web interface or mobile app. Physical controls: Reset button, SD card slot.

Web Interface: Video settings (resolution, bitrate, frame rate), Audio settings (volume, noise reduction), Network configuration, Motion detection zones, Recording schedule, User management.

Mobile App: Live view, PTZ controls (digital), Two-way talk, Motion alerts, Playback from SD card.

Advanced: Privacy masking, Video analytics, Firmware update, System reboot.

Connecting Devices

Network: Ethernet to router or PoE switch. Storage: Insert MicroSD card. NVR: Connect via ONVIF protocol.

1. Ensure camera is powered off before connecting cables.
2. Use Cat5e or higher Ethernet cable for PoE connection.
3. For NVR integration, enable ONVIF in network settings.
4. Configure port forwarding for remote access if needed.

Tip: Use shielded Ethernet cables for outdoor installations to prevent interference.

Live Streaming & Recording

Supports RTSP, HTTP, and ONVIF streaming protocols.

1. Live view: Access via web browser or mobile app.
2. Recording: Set up continuous or motion-triggered recording to SD card or NVR.
3. Playback: Use timeline in mobile app or web interface to review recordings.
4. Snapshot: Capture still images during live view.
5. Digital PTZ: Zoom and pan digitally within the 4K frame.
6. Motion alerts: Configure zones and sensitivity for push notifications.
7. Two-way audio: Press and hold talk button to communicate.
8. Schedule: Set recording schedules for specific times.

WARNING! Format SD card regularly to maintain performance. Back up important recordings.

Accessibility Features

Audio alerts: Configure sound notifications for motion detection. Visual indicators: LED status lights can be disabled for stealth operation. Voice guidance: Available in mobile app for visually impaired users.

Care & Cleaning

Disconnect power before cleaning. Use soft, dry cloth for lens and housing. For stubborn dirt, use lens cleaning solution on cloth, not directly on lens.

CAUTION! Do not use abrasive cleaners or solvents. Ensure housing is sealed after cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian EMI regulations. CE: Meets European safety and EMC standards. Copyright © 2025 Pni Technologies; all trademarks property of their respective owners. For support, visit www.pnitech.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No video signal	Power/network issues	Check PoE connection; verify network cable; restart camera.
Poor night vision	Obstructions/IR reflection	Clean lens; avoid pointing at reflective surfaces; check IR LED status.
Motion alerts not working	Settings/zone configuration	Enable motion detection; adjust sensitivity; configure zones properly.
Can't access remotely	Network/port forwarding	Check router settings; configure port forwarding; verify DDNS setup.
SD card not recognized	Format/compatibility	Format card to FAT32; ensure compatibility; insert properly.

Reset: Press and hold reset button for 10 seconds to restore factory defaults.

Service: 1-800-555-1234; www.pnitech.com