On SOLAR LED SENSOR Installation Manual

The On SOLAR LED SENSOR is an energy-efficient outdoor lighting solution featuring a high-capacity solar panel, long-lasting LED lights, and an intelligent motion sensor. Designed for automatic dusk-to-dawn operation, it provides reliable illumination for pathways, gardens, and security areas. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Solar Panel, LED Light Unit, Motion Sensor, Rechargeable Battery, Mounting Bracket, and Weatherproof Housing.

Package Contents

Unpack and verify all components are present.

1. Solar LED Light Unit (with integrated sensor)
2. Mounting Bracket with screws and anchors
3. Ground Stake (for garden installation)
4. User Manual (this document)
5. Warranty Card

WARNING! Do not discard packaging until all components are verified. Missing parts? Contact customer support immediately.

Installation Steps

Follow these steps for proper installation and optimal performance.

1. Choose Location: Select area with direct sunlight (6-8 hours daily). Avoid shadows from trees or buildings.
2. Mount Bracket: Use provided screws to secure bracket to wall, pole, or insert ground stake firmly.
3. Attach Light Unit: Slide light unit onto bracket until it clicks into place.
4. Angle Adjustment: Adjust solar panel to face south (northern hemisphere) for maximum sun exposure.
5. Initial Charge: Leave in direct sunlight for 24 hours before first use to fully charge battery.

CAUTION! Ensure mounting surface is stable and can support light weight. Do not install near heat sources or flammable materials.

Specifications

• Solar Panel: 5W Monocrystalline, 18V
• LED Output: 600 Lumens, 6000K Cool White
• Battery: 3.7V 4400mAh Lithium-ion
• Sensor Range: Up to 26 feet (8 meters), 120° detection angle
• Light Duration: 10 sec - 30 min (adjustable)
• Charging Time: 6-8 hours (full sun)
• Operation Time: Up to 12 hours (fully charged)
• Weatherproof Rating: IP65 (Dust tight and protected against water jets)
• Operating Temperature: -20°C to 50°C (-4°F to 122°F)
• Dimensions: 11.8" x 7.1" x 3.5" (300mm x 180mm x 90mm)

Controls and Settings

Access settings via the control panel on the back of the light unit.

Control Buttons: MODE (cycles through operating modes), TEST (manual activation), SENSITIVITY (+/- adjustment), DURATION (+/- adjustment).

Indicator Lights: Red (charging), Green (fully charged), Blue (motion detected).

Settings Menu: Press and hold MODE for 3 seconds to enter settings: Brightness Level (Low/Medium/High), Sensor Range (Near/Medium/Far), Daylight Sensitivity (adjust when light turns on).

Sensor Configuration

Customize motion sensor for your specific needs.

1. Sensitivity Adjustment: Use +/- buttons to set how sensitive the sensor is to movement.
2. Range Setting: Choose detection distance (8ft/16ft/26ft).
3. Duration Control: Set how long lights stay on after motion stops (10s to 30min).
4. Daylight Threshold: Adjust the ambient light level at which sensor activates.

Tip: Test different settings at night to find optimal configuration for your space.

Operation Modes

Three operating modes available for different lighting needs.

1. Auto Mode (Default): Lights turn on at dusk, off at dawn. Motion sensor activates brighter illumination when movement detected.
2. Motion Only Mode: Lights remain off until motion detected, then illuminate for set duration.
3. Manual Mode: Lights stay on continuously until manually turned off.
4. Test Mode: Press TEST button to verify light and sensor operation.

WARNING! Do not look directly at LED lights at close range. Keep sensor clean from obstructions like spider webs or dirt.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Monthly: Wipe solar panel with soft, damp cloth to remove dust and debris.
2. Seasonal: Check mounting hardware for tightness, especially after storms.
3. Annual: Inspect housing for cracks or water ingress.
4. Battery: Battery typically lasts 2-3 years. Replace when runtime decreases significantly.

CAUTION! Do not use abrasive cleaners or high-pressure water on solar panel. Disconnect or cover during extreme weather.

Warranty Information

2-Year Limited Warranty covering defects in materials and workmanship. Warranty does not cover damage from improper installation, accidents, or natural disasters. Battery warranty: 1 year. For warranty claims, contact customer service with proof of purchase. For support, visit www.onsolarled.com or contact 1-800-555-ONSL.

Troubleshooting

Reset: Press and hold MODE + TEST for 10 seconds to restore factory settings.

Service: 1-800-555-ONSL; www.onsolarled.com