O.n ASTRO Installation Manual

The O.n ASTRO is an advanced smart home automation hub with integrated AI assistant, multi-protocol wireless connectivity (Wi-Fi 6, Zigbee 3.0, Z-Wave 800, Thread, Matter), built-in 4K video processing, voice control capabilities, environmental sensors, and energy monitoring. Powered by 100-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Central Processing Unit with AI Core, Multi-Protocol Wireless Module, Environmental Sensor Array, Power Management Unit, Status LED Ring, Reset Button, Ethernet Port, USB-C Power Input.

Installation Requirements

Unpack and inspect contents. Choose optimal location for central coverage.

1. Location selection: Central position in home, away from metal obstructions and large appliances.
2. Power connection: Use included USB-C power adapter and cable.
3. Network connection: Connect Ethernet cable to router for initial setup (optional for Wi-Fi).
4. Mounting: Use included wall mount bracket or place on stable surface.

WARNING! Do not install in areas with extreme temperatures or high humidity. Ensure proper ventilation around device.

First-Time Setup

Power on ASTRO hub; follow setup wizard in mobile app.

1. Download O.n Home app from App Store or Google Play.
2. Create account and log in to app.
3. Press and hold reset button for 5 seconds until LED ring pulses blue.
4. Follow in-app instructions to connect hub to Wi-Fi network.
5. Add devices through app discovery or manual pairing.
6. Configure rooms and automation routines.

CAUTION! Keep firmware updated for security and performance improvements.

Technical Specifications

• Processor: Quad-core ARM Cortex-A76 @ 2.4GHz
• Memory: 4GB LPDDR4 RAM, 32GB eMMC storage
• Wireless: Wi-Fi 6 (802.11ax), Bluetooth 5.3
• Smart Protocols: Zigbee 3.0, Z-Wave 800, Thread, Matter
• Connectivity: Gigabit Ethernet, USB 3.0 Type-C
• Sensors: Temperature (-10°C to 60°C), Humidity (0-100% RH), PM2.5, VOC, Ambient Light
• Power Input: USB-C PD, 100-240V AC, 50/60Hz
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Dimensions: 120mm × 120mm × 35mm
• Weight: 450g

Controls and Interface

Physical Controls: Power Button, Reset Button, Status LED Ring. Mobile App: O.n Home app for iOS and Android.

LED Status Indicators: Blue (Starting/Updating), Green (Normal Operation), Yellow (Setup Mode), Red (Error/Alert), Purple (Pairing Mode).

App Interface: Dashboard (Device Overview), Rooms (Room Management), Automation (Scene Creation), Settings (System Configuration). Voice Control: Compatible with Amazon Alexa, Google Assistant, Apple HomeKit via Matter.

Connecting Devices

Supports connection of smart lights, switches, sensors, cameras, locks, and appliances.

1. Ensure device is in pairing mode (refer to device manual).
2. Open O.n Home app and tap "+ Add Device".
3. Select device type from list or scan QR code.
4. Follow on-screen instructions for specific protocol (Zigbee/Z-Wave/Thread).
5. Assign device to room and customize name.

Tip: For optimal performance, add devices within 10 meters of hub during pairing.

Network Configuration

Configure Wi-Fi and network settings for optimal performance.

1. Wi-Fi Setup: Connect to 2.4GHz or 5GHz network (dual-band supported).
2. Static IP: Assign static IP address for stable remote access.
3. Port Forwarding: Configure for direct remote connection (optional).
4. VPN Setup: Integrate with home VPN for enhanced security.
5. Guest Network: Isolate IoT devices on separate network.

Note: Ethernet connection recommended for video streaming and large networks.

Security Features

Local Processing: Most automations processed locally for privacy. End-to-End Encryption: All communications encrypted. Two-Factor Authentication: Required for remote access. Automatic Updates: Security patches delivered automatically. Device Authentication: Each device cryptographically verified.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Use dry, soft cloth to wipe exterior. Do not use liquids or cleaners.
2. Ventilation: Ensure vents are not blocked by objects or dust.
3. Updates: Regularly check for and install firmware updates.
4. Backup: Periodically backup configuration to cloud or local storage.

CAUTION! Do not open housing - no user-serviceable parts inside. Void warranty if opened.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE, RoHS, WEEE compliant. ICES-003: Canada compliant. Operating frequency: 2.4GHz & 5GHz bands. Maximum RF output power: <30dBm. Copyright © 2024 O.n Technologies. All rights reserved. For support, visit support.ontech.com or contact 1-800-555-ON-TECH.

Troubleshooting

Factory Reset: Hold reset button for 15 seconds until LED flashes yellow, then release.

Support: 1-800-555-ON-TECH; support.ontech.com; community.ontech.com