Nurzviy SolarEpoch 180G User Manual

The Nurzviy SolarEpoch 180G is a 180W portable solar power station with a 540Wh lithium-ion battery, pure sine wave AC output (120V, 60Hz, 150W max), multiple DC outputs (USB-A, USB-C PD, 12V car port), MPPT solar charge controller, LCD status display, and built-in LED flashlight. Designed for outdoor, emergency, and off-grid power needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Solar Operation 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-capacity lithium-ion battery pack, MPPT charge controller, Pure sine wave inverter, LCD display, Multiple output ports, Built-in LED flashlight.

Feature	Description
AC Output	120V, 60Hz, 150W max pure sine wave
DC Outputs	2x USB-A (5V/2.4A), 1x USB-C PD (60W), 1x 12V car port (10A max)
Battery Capacity	540Wh (Lithium-ion)
Solar Input	11-28V DC, 10A max, MC4 connector
AC Charging	100-240V AC, 50/60Hz, included adapter
LCD Display	Shows battery level, input/output power, warnings
Flashlight	Built-in LED with SOS and strobe modes
Overload Protection	Automatic shutdown on overload/short circuit
Cooling Fan	Temperature-controlled for high-load operation
Weight	13.2 lbs (6 kg)

Installation

Unpack and inspect contents. Place on stable, dry surface away from direct sunlight and moisture.

Initial Charge: Connect included AC adapter to AC input port and wall outlet. Charge fully before first use (approx. 6-8 hours).
Solar Panel Connection: Use MC4 cables to connect compatible solar panel (11-28V, ≤10A) to solar input port.
Device Connection: Connect your devices to appropriate output ports (AC, USB, 12V).
Power On: Press and hold power button for 3 seconds to turn on unit.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; monitor LCD display for status.

Initial Charge: Ensure battery is fully charged via AC adapter before first use.
LCD Display Familiarization: Check battery percentage, input/output wattage, and warning icons.
Output Configuration: Press MODE button to cycle through output options (AC always on, DC only, etc.).
Flashlight Operation: Press flashlight button to cycle through modes (On, SOS, Strobe, Off).

CAUTION! Use only included or manufacturer-approved cables and adapters.

Specifications

Model: SolarEpoch 180G
Battery Capacity: 540Wh, Lithium-ion
AC Output: 120V, 60Hz, 150W (300W surge), Pure sine wave
DC Outputs: USB-A: 5V/2.4A (x2), USB-C PD: 60W, 12V Car Port: 10A max
Solar Input: 11-28V DC, 10A max, 180W max
AC Charging Input: 100-240V AC, 50/60Hz, 90W max
Display: LCD with battery level, input/output power, temperature
Flashlight: 3W LED, SOS & Strobe modes
Operating Temp: 32°F to 104°F (0°C to 40°C)
Dimensions: 11.8 x 7.5 x 7.5 inches (30 x 19 x 19 cm)

Controls and Settings

Front Panel: POWER button (press 3 sec to turn on/off), MODE button, Flashlight button, LCD display.

Ports: AC output socket, USB-A ports, USB-C PD port, 12V car port, Solar input (MC4), AC input socket.

LCD Display Icons: Battery percentage, Input power (solar/AC), Output power (AC/DC), Temperature warning, Overload warning. Settings: Press MODE to select output mode (AC+DC, DC only, Eco mode). Flashlight: Press to cycle On → SOS → Strobe → Off.

Connecting Devices

AC Devices: Plug into AC outlet (max 150W). USB Devices: Connect phones/tablets to USB-A or USB-C ports. 12V Devices: Use 12V car port for car appliances. Solar Panel: Connect via MC4 cables to solar input.

Ensure SolarEpoch is powered on.
Check device power requirements do not exceed port limits.
Connect device cable to appropriate port.
Device should power on automatically; some may require manual power on.

Tip: For high-power AC devices, ensure battery is above 20% for optimal performance.

Charging & Solar Operation

Supports AC wall charging and solar charging.

AC Charging: Connect included AC adapter to input port and wall outlet. LCD shows charging status and estimated time.
Solar Charging: Connect compatible solar panel (11-28V, ≤10A) via MC4 cables. Position panel in direct sunlight.
Charging Status: LCD displays input power (W) and battery percentage increasing.
Simultaneous Use: Can charge battery and power devices at same time.
Battery Saving: Eco mode turns off outputs when connected device is fully charged or inactive.

WARNING! Use only solar panels within specified voltage/current range. Do not look directly at solar panel.

Safety Features

Overload Protection: Automatically shuts off output if exceeds power limit. Short Circuit Protection: Detects and disables output. Temperature Control: Fan activates during high load; unit shuts down if overheated. Low Voltage Protection: Turns off when battery drops below 10% to prevent damage.

Care & Cleaning

Power off and disconnect all cables before cleaning. Use dry, soft cloth to wipe exterior. Do not use liquids or abrasive cleaners.

CAUTION! Do not disassemble unit. Avoid impacts or dropping. Store in cool, dry place when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Nurzviy; all trademarks property of Nurzviy Technologies. For support, visit www.nurzviy.com or contact 1-800-555-1830.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't power on	Battery depleted	Connect to AC or solar charger; allow 10 minutes before turning on.
No output power	Overload/temperature	Disconnect devices; allow to cool; restart. Check for overload warning.
Solar not charging	Connection/sunlight	Ensure MC4 cables secure; panel in direct sunlight; check voltage compatibility.
Device not charging via USB	Cable/port issue	Try different cable; ensure device supports port specifications (e.g., PD for USB-C).
Fan runs continuously	High load/temperature	Reduce connected device power; move to cooler environment.

Reset: Turn off, disconnect all devices, wait 2 minutes, then restart.

Service: 1-800-555-1830; www.nurzviy.com/support