Nurzviy SolarEpoch 100 User Manual

The Nurzviy SolarEpoch 100 is a 100W portable solar power station designed for off-grid energy solutions, featuring high-efficiency monocrystalline solar panels, a 100,000mAh lithium-ion battery, multiple output ports (AC, DC, USB), MPPT charge controller, LCD status display, overload protection, and weather-resistant construction. Ideal for camping, emergencies, and remote power needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Monocrystalline Solar Panel, Power Station Unit, Remote Control, AC Input/Output Ports, DC Output Ports, USB Ports, LCD Display.

Feature	Description
Solar Panel Input	For connecting solar panels (max 100W)
AC Output Port	For powering AC devices (110V/60Hz)
DC Output Ports	For 12V/24V devices (cigarette lighter socket)
USB Ports	For charging phones, tablets, and small electronics
LCD Display	Shows battery level, input/output power, and status
MPPT Controller	Maximizes solar charging efficiency
Overload Protection	Automatically shuts off output if overloaded
Battery Management System	Protects against overcharge, over-discharge, and short circuit
Carrying Handle	For easy portability
Weather-Resistant Case	IP54 rated for outdoor use

Installation

Unpack and inspect contents. Place on stable, flat surface.

Position Solar Panel: Place in direct sunlight, facing the sun at optimal angle.
Connect Solar Panel to Station: Use provided cable to connect panel to SOLAR INPUT port.
Connect Devices: Plug devices into appropriate output ports (AC, DC, USB).
Power On: Press and hold POWER button for 3 seconds to activate station.

WARNING! Do not expose to rain or submersion. Ensure all connections are secure before operation.

First-Time Setup

Power on station; follow LCD display prompts.

Initial Charge: Fully charge battery via solar or AC adapter before first use.
Set Language: In SETTINGS menu, select ENGLISH (default).
Configure Output: Use MODE button to select output type (AC, DC, USB).
Monitor Status: Check LCD for battery level and power flow.

CAUTION! Keep away from flammable materials and extreme temperatures.

Specifications

Battery Capacity: 100,000mAh / 370Wh Lithium-ion.
Solar Input: 100W Max, 12-24V DC.
AC Output: 110V, 60Hz, 300W continuous.
DC Output: 12V/10A, 24V/5A.
USB Output: 2x USB-A (5V/2.4A), 1x USB-C (PD 60W).
Charge Time: Solar: 6-8 hours (full sun); AC: 4-5 hours.
Display: 3.5-inch LCD with touch controls.
Operating Temp: -10°C to 50°C (14°F to 122°F).
Weight: 8.8 lbs (4 kg).

Controls and Settings

Access menu via LCD touch screen or remote control. Front Panel: POWER, MODE, SETTINGS, BACKLIGHT.

Remote: POWER, Numeric buttons, MODE, SETTINGS, VOLUME, MUTE, BACK, ENTER.

Output Settings: AC output voltage/frequency, DC output voltage, USB charging mode. System: Language (ENGLISH default), screen timeout, brightness, unit (C/F). Safety: Overload threshold, temperature cutoff, password protection (default 0000). Solar: MPPT mode, charging current limit.

Connecting Devices

Solar Panel: SOLAR INPUT port. AC Devices: AC OUTPUT port. DC Devices: DC OUTPUT port. USB Devices: USB ports.

Turn off station and devices before connecting.
Match device power requirements to station output capabilities.
Select correct output mode via MODE button or touch screen.

Tip: Start with low-power devices to test functionality before connecting high-power appliances.

Charging & Power Management

Supports solar, AC wall adapter, and car charger input.

Solar Charging: Connect panel, ensure direct sunlight, monitor LCD for input power.
AC Charging: Use provided AC adapter, plug into wall outlet and AC INPUT port.
Device Charging: Connect devices to appropriate ports, station automatically detects and delivers optimal power.
Battery Save Mode: Enable in settings to extend battery life during low usage.
Parallel Charging: Charge multiple devices simultaneously (total output not to exceed 300W).

WARNING! Do not exceed maximum input/output ratings. Disconnect during thunderstorms.

Safety Features

Overload Protection: Automatically cuts power if load exceeds 300W. Short Circuit Protection: Isolates output in case of short. Temperature Control: Reduces output or shuts down if overheated. Low Voltage Protection: Prevents battery damage by cutting off at 10% capacity.

Care & Cleaning

Power off and disconnect all cables before cleaning. Use slightly damp cloth for exterior; keep ports dry.

CAUTION! Do not use harsh chemicals or abrasives. Store in cool, dry place when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Nurzviy Technologies; trademarks of Nurzviy Solar Solutions, Inc. For support, visit www.nurzviysolar.com or contact 1-800-555-ENERGY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Battery depleted/overload	Recharge battery; reduce connected load; reset station.
Solar not charging	Poor sunlight/connections	Reposition panel for direct sun; check cable connections.
LCD display blank	Battery low/backlight off	Charge station; press BACKLIGHT button to activate display.
Overload warning	Connected device exceeds rating	Disconnect high-power devices; restart station.
USB devices not charging	Port selection/cable issue	Ensure correct output mode selected; try different cable.

Reset: Press and hold POWER + MODE for 10 seconds to factory reset.

Service: 1-800-555-ENERGY; www.nurzviysolar.com