Nicesolar SFSP-100 User Manual

The Nicesolar SFSP-100 is a 100W Portable Solar Power Station designed for outdoor activities, emergency backup, and off-grid power needs. It features a high-efficiency monocrystalline solar panel, a 296Wh lithium-ion battery pack, multiple output ports (AC, DC, USB), pure sine wave inverter, MPPT charge controller, LCD display showing battery status and input/output power, built-in LED flashlight, and overload/short-circuit protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable Solar Power Station, Solar Panel, AC Power Adapter, Car Charging Cable, User Manual.

Feature	Description
Solar Panel Input	DC 12-24V, 100W max for solar charging
AC Output	110V/60Hz, 100W continuous (200W surge), pure sine wave
DC Output Ports	12V/10A car port, 2x DC 5.5x2.1mm ports
USB Output Ports	2x USB-A (5V/2.4A), 1x USB-C (PD 18W)
Battery Capacity	296Wh Lithium-ion (80000mAh)
LCD Display	Shows battery level, input/output power, charging status
MPPT Controller	Maximizes solar charging efficiency
LED Flashlight	Built-in with SOS and strobe modes
Overload Protection	Automatic shutdown on overload or short circuit
Weight	Approx. 6.6 lbs (3 kg)

Installation

Unpack and inspect all components. Place unit on a stable, dry surface.

Position Solar Panel: Unfold panel and place in direct sunlight, facing the sun.
Connect Solar Panel: Use provided cable to connect panel to SOLAR INPUT port.
Connect AC Power (Optional): Plug AC adapter into WALL CHARGE port for grid charging.
Connect Devices: Plug devices into appropriate output ports (AC, DC, USB).

WARNING! Do not expose unit to water, rain, or extreme temperatures. Keep ventilation openings clear.

First-Time Setup

Power on the unit by pressing the POWER button; check LCD display.

Initial Charge: Fully charge the unit via solar or AC adapter before first use.
LCD Display: Verify battery level (%), input/output power (W), and charging icon.
Output Selection: Press OUTPUT button to cycle through AC/DC/USB outputs; ensure correct port is active.
Flashlight Mode: Press and hold FLASHLIGHT button to toggle between steady, SOS, and strobe modes.

CAUTION! Charge only in well-ventilated areas; avoid charging near flammable materials.

Specifications

Battery Type: Lithium-ion, 296Wh (80000mAh).
Solar Input: DC 12-24V, 100W max, MC4 connector.
AC Output: 110V ±5%, 60Hz, 100W continuous, 200W surge.
DC Output: 12V/10A (car port), 12V/3A (DC ports).
USB Output: USB-A: 5V/2.4A each; USB-C: 5V/9V/12V, 18W max.
Charging Time: Solar: 6-8 hours (full sun); AC: 5-6 hours; Car: 7-8 hours.
Display: LCD with battery level, input/output power, error codes.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Storage Temp: -4°F to 140°F (-20°C to 60°C).

Controls and Settings

Front Panel: POWER button, OUTPUT button, FLASHLIGHT button, LCD display.

Ports: SOLAR INPUT, WALL CHARGE, CAR CHARGE, AC OUTPUT, DC OUTPUTS, USB PORTS.

LCD Display Icons: Battery percentage, solar/wall/car charging icon, AC/DC/USB output active, overload warning, low battery warning. Settings: Press OUTPUT to enable/disable AC or DC outputs; long-press POWER (3 seconds) to turn unit on/off; press FLASHLIGHT to cycle modes.

Connecting Devices

Solar Panel: Connect to SOLAR INPUT. AC Devices: Plug into AC outlet (max 100W). DC Devices: Use car port or DC ports. USB Devices: Plug into USB-A or USB-C ports.

Check device power requirements (W or A) do not exceed port limits.
Turn off device before connecting.
Press OUTPUT button to activate desired output port (AC, DC, or USB).
Monitor LCD for power draw and battery level.

Tip: For high-power devices (e.g., mini-fridge), use AC output and ensure total load ≤100W.

Charging & Power Management

Supports solar, AC wall, and car charging.

Solar Charging: Connect panel; align to sun; LCD shows solar icon and input power.
AC Charging: Plug adapter into WALL CHARGE port and wall outlet.
Car Charging: Use car charger cable in vehicle's 12V socket while driving.
Battery Management: Unit automatically stops charging at 100%; low battery warning at 10%.
Power Saving: Auto-shutdown after 30 minutes if no load detected (can be disabled in settings).

WARNING! Use only provided or manufacturer-approved cables. Do not charge in extreme heat.

Safety Features

Overload/Short Circuit Protection: Auto-shutdown with error code E1. Over-temperature Protection: Shuts down if internal temp exceeds 140°F (60°C). Low Voltage Protection: Auto-shutdown at 10% battery to prevent damage. Battery Management System (BMS): Prevents overcharge, over-discharge, and short circuits.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth; do not use liquids. Recharge every 3 months if storing long-term.

CAUTION! Do not disassemble; no user-serviceable parts inside. Keep away from metal objects to prevent short circuits.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Nicesolar; trademarks of Nicesolar Inc. For support, visit www.nicesolar.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	Battery depleted	Charge via solar, AC, or car input; check connections.
No output power	Output not enabled/overload	Press OUTPUT button; reduce connected load; check for error E1.
Solar not charging	Insufficient sunlight/connection	Ensure full sun, panel aligned; check cable connection to SOLAR INPUT.
Overload error E1	Connected device exceeds 100W	Disconnect device; restart unit; connect lower-power device.
LCD display blank	Battery fully depleted	Charge for 30 minutes; display should reappear.

Reset: Disconnect all devices, charge for 1 hour, then restart.

Service: 1-800-555-1234; www.nicesolar.com