Nicesolar FSP-60 User Manual

The Nicesolar FSP-60 is a 60W Foldable Solar Panel designed for portable power generation. It features high-efficiency monocrystalline solar cells, a built-in USB-A and USB-C output, a waterproof and dustproof design, an integrated kickstand, and a compact folding form factor. Ideal for charging phones, tablets, power banks, cameras, and other USB devices during outdoor activities, emergencies, or off-grid use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency Monocrystalline Solar Cells, USB-A Output Port, USB-C Output Port, Integrated Kickstand, Carrying Handle, Waterproof Fabric, and Durable Zipper Case.

Installation

Unpack and inspect contents. Ensure all components are present and undamaged.

1. Choose Location: Place on a stable, flat surface in direct sunlight.
2. Unfold Panel: Open the solar panel fully and secure the kickstand.
3. Angle Adjustment: Adjust the kickstand to achieve the best sun angle (typically facing the sun directly).
4. Connect Devices: Use provided or certified USB cables to connect your devices.

WARNING! Do not place near heat sources or flammable materials. Avoid shading the panel for optimal performance.

First-Time Setup

Unfold the panel and position it in sunlight to begin charging.

1. Initial Check: Ensure the panel is clean and free of obstructions.
2. Connect Device: Plug your device into the USB-A or USB-C port.
3. Check Indicator: The LED indicator should light up, showing charging status.
4. Optimize Position: Adjust the panel angle throughout the day to follow the sun.

CAUTION! Do not look directly at the sun when positioning the panel. Keep the panel and cables away from water beyond its rated resistance.

Specifications

• Maximum Power (Pmax): 60W
• Cell Type: Monocrystalline Silicon
• Open Circuit Voltage (Voc): 21.6V
• Short Circuit Current (Isc): 3.47A
• USB-A Output: 5V/2.4A, 9V/2A, 12V/1.5A
• USB-C Output: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A (Max 30W PD)
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Folded Dimensions: 14.2 x 8.3 x 1.6 in (360 x 210 x 40 mm)
• Unfolded Dimensions: 14.2 x 25.6 x 0.2 in (360 x 650 x 5 mm)
• Weight: 3.3 lbs (1.5 kg)
• Waterproof Rating: IPX4

Controls and Settings

The panel features automatic power management. No manual settings are required for basic operation.

Indicator Lights: LED shows power status (Green: Charging, Red: Error/No Power).

Smart Charging: Automatically detects connected devices and delivers optimal voltage and current.

Angle Adjustment: Use the kickstand to change the panel's tilt for maximum solar exposure.

Connecting Devices

Connect compatible USB devices directly to the panel's output ports.

1. Ensure the panel is in direct sunlight.
2. Use a high-quality USB cable compatible with your device.
3. Plug the cable into the USB-A or USB-C port on the panel.
4. Connect the other end to your device (phone, tablet, power bank, etc.).
5. The device should begin charging automatically.

Tip: For fastest charging, use the USB-C port with a device that supports Power Delivery (PD).

Operation & Charging

Designed for simple, plug-and-play operation with USB devices.

1. Position Panel: Unfold and place in direct sunlight. Adjust the kickstand.
2. Connect Device: Plug your device into an available USB port.
3. Monitor Charging: Check your device's screen or the panel's LED indicator.
4. Disconnect: Unplug your device once charged.
5. Storage: Fold the panel and store in a cool, dry place.

WARNING! Do not attempt to disassemble or modify the panel. Do not connect to non-USB devices or batteries directly without a proper solar charge controller.

Safety Features

Over-current Protection: Automatically limits output if current exceeds safe levels. Short-circuit Protection: Safeguards the panel and connected devices. Over-temperature Protection: Reduces output if the panel overheats. Water Resistance: IPX4 rating protects against light splashes.

Care & Cleaning

Disconnect all devices before cleaning. Use a soft, dry cloth to wipe the solar panel surface. For stubborn dirt, use a damp cloth with mild soap and water, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or high-pressure water. Do not clean while the panel is operating or hot. Ensure the panel is completely dry before folding and storing.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2025 Nicesolar; trademarks of Nicesolar Technologies, Inc. For support, visit www.nicesolar.com or contact 1-800-555-1234.

Troubleshooting

Reset: Disconnect all devices, fold the panel, wait 1 minute, then unfold and reconnect.

Service: 1-800-555-1234; www.nicesolar.com/support