Nature Power 56808 User Manual

The Nature Power 56808 is a portable power station designed for outdoor and emergency use, featuring multiple AC outlets, DC ports, USB charging ports, and a high-capacity lithium battery. It provides reliable power for small appliances, electronics, and tools, with built-in safety protections, LCD display for monitoring, and multiple charging options (AC wall charger, solar panel, car charger). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-capacity lithium battery, LCD display, AC outlets, DC ports, USB ports, charging inputs, and control panel.

Feature	Description
AC Output	Standard household AC outlets for powering small appliances
DC Output Ports	For 12V devices such as car coolers or lights
USB Charging Ports	For smartphones, tablets, and other USB devices
LCD Display	Shows battery level, input/output power, and status
AC Charging Input	For recharging from a wall outlet
Solar Charging Input	For recharging with compatible solar panels
Car Charging Input	For recharging from a vehicle's 12V outlet
Power Button	Turns the unit on/off
Overload Protection	Automatically shuts off if overload is detected
Cooling Fan	Activates during high load to prevent overheating

Installation

Unpack and inspect contents. Place on stable, dry surface.

1. Initial Inspection: Check for any visible damage to the unit or accessories.
2. Positioning: Place in a well-ventilated area away from direct sunlight and moisture.
3. Connect Devices: Plug devices into appropriate outlets (AC, DC, USB).
4. Power On: Press the POWER button to activate the unit.

WARNING! Do not place near heat sources or flammable materials. Ensure proper ventilation during use.

First-Time Setup

Charge the unit fully before first use for optimal battery performance.

1. Initial Charge: Connect the included AC adapter to the unit and a wall outlet. Charge until LCD shows 100%.
2. Power On: Press and hold the POWER button for 3 seconds to turn on.
3. LCD Check: Verify that the display shows battery level and output status.
4. Test Outputs: Connect a small device (e.g., phone charger) to test functionality.

CAUTION! Use only the provided or recommended charging accessories. Incorrect chargers may damage the unit.

Specifications

• Battery Capacity: High-capacity lithium-ion battery (specify watt-hours if known).
• AC Output: 120V AC, 60Hz, pure sine wave (if applicable).
• DC Output: 12V/10A max.
• USB Output: 5V/2.4A per port.
• Input for Charging: AC 100-240V, 50/60Hz; Solar 12-24V; Car 12V.
• LCD Display: Shows battery percentage, input/output power, warnings.
• Safety Protections: Overload, short circuit, over-temperature, low voltage protection.
• Operating Temperature: 32°F to 104°F (0°C to 40°C).
• Weight: Portable design for easy transport.

Controls and Settings

Control via front panel buttons and LCD display.

Front Panel: POWER button, LCD display, AC outlet switch, USB/DC port indicators.

LCD Display: Shows battery level (%), input power (W), output power (W), estimated runtime, warning icons (overload, high temperature).

Settings: Press and hold POWER to enter settings mode (if applicable) for brightness adjustment, auto-shutdown timer, and battery calibration.

Connecting Devices

Connect devices based on their power requirements and plug types.

1. AC Devices: Plug into AC outlets (ensure total wattage does not exceed unit's rating).
2. DC Devices: Use the DC output ports with appropriate adapter.
3. USB Devices: Connect directly to USB ports for charging.
4. Turn on the AC outlet switch if separate from main power button.

Tip: Check device power ratings before connecting to avoid overloading the unit.

Charging the Unit

Recharge using AC wall outlet, solar panel, or car charger.

1. AC Charging: Connect the AC adapter to the unit and wall outlet. LCD will show charging status.
2. Solar Charging: Connect compatible solar panel to the solar input port. Ensure adequate sunlight.
3. Car Charging: Plug the car charger into the vehicle's 12V outlet and connect to the unit.
4. Charging Time: Varies based on method and battery level (refer to specifications for estimated times).
5. Full Charge Indicator: LCD shows 100% and charging icon turns off when complete.

WARNING! Do not charge in extreme temperatures. Use only recommended charging accessories.

Safety Features

Built-in protections to ensure safe operation.

Overload Protection: Automatically shuts off output if connected devices exceed rated power.

Short Circuit Protection: Cuts power in case of a short circuit.

Over-Temperature Protection: Activates cooling fan and may reduce output if unit overheats.

Low Voltage Protection: Shuts down to prevent battery damage when voltage is too low.

Care & Maintenance

Keep unit clean and store properly when not in use.

Cleaning: Use a dry, soft cloth. Do not use liquids or abrasive cleaners.

Storage: Store in a cool, dry place with battery charged to 50-80% if not used for extended periods.

Battery Care: Avoid complete discharge; recharge when battery level drops below 20%.

CAUTION! Do not disassemble the unit. There are no user-serviceable parts inside.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference.

Copyright © 2025 Nature Power. All trademarks are property of their respective owners.

For support, visit www.naturepower.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Recharge the unit fully before use.
No output power	Overload protection triggered	Disconnect devices, wait 30 seconds, and restart. Reduce connected load.
Slow charging	Insufficient input power	Ensure charger is properly connected and power source is adequate.
Overheating	High ambient temperature or overload	Move to cooler location, reduce load, ensure ventilation.
LCD display blank	Unit in sleep mode or battery dead	Press POWER button; if no response, recharge the unit.

Reset: Disconnect all devices, turn off unit, wait 1 minute, then restart.

Service: 1-800-555-1234; www.naturepower.com