Msw S-POWER MP18-160 User Manual

The Msw S-POWER MP18-160 is a high-performance portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. Featuring a 160Wh lithium-ion battery, multiple output ports (AC, DC, USB), pure sine wave inverter technology, LCD display for monitoring, and lightweight portable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, Pure Sine Wave AC inverter, LCD status display, Multiple output ports, Carrying handle, Cooling fan.

Feature	Description
AC Output Ports	2 x 110V AC outlets (pure sine wave)
DC Output Ports	1 x 12V/10A car socket; 2 x DC5521 ports
USB Output Ports	2 x USB-A (5V/2.4A); 1 x USB-C (PD 60W)
LCD Display	Shows battery level, input/output wattage, temperature
Input Charging Ports	DC input for wall adapter; solar input (11-28V)
Power Button	Turns unit on/off
AC Button	Activates/deactivates AC output
DC Button	Activates/deactivates DC output
LED Light	Built-in emergency flashlight with SOS mode
Cooling Fan	Automatic temperature-controlled ventilation

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to DC input port and wall outlet.
Device Connection: Connect your electronic devices to appropriate output ports.
Solar Panel Connection (Optional): Connect compatible solar panel to solar input port.
Car Charging (Optional): Use car charger cable with 12V car socket.

WARNING! Keep away from water, heat sources, and flammable materials. Do not disassemble unit.

First-Time Setup

Power on unit; monitor LCD display.

Initial Charge: Charge fully before first use (approx. 5-6 hours).
LCD Display Check: Verify battery percentage and output status.
Output Activation: Press AC/DC buttons to activate respective outputs.
Device Testing: Connect low-power device first to test functionality.

CAUTION! Do not exceed maximum output ratings. Ensure proper ventilation during use.

Specifications

Battery Capacity: 160Wh (43,200mAh @ 3.7V)
Battery Type: Lithium-ion (LiFePO4)
AC Output: 110V~ 60Hz, 150W continuous (300W surge)
DC Output: 12V/10A max (car port); 12V/3A max (DC5521)
USB Output: USB-A: 5V/2.4A each; USB-C: 5-20V/3A (60W max)
Input Charging: AC adapter: 15V/3A; Solar: 11-28V/5A max
Display: LCD with battery %, input/output power, temperature
Weight: 3.5 lbs (1.6 kg)
Dimensions: 9.1 x 5.5 x 5.9 inches (23 x 14 x 15 cm)
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Front Panel Controls: POWER button, AC button, DC button, LED light button.

LCD Display Icons: Battery percentage, Input/Output power (W), Temperature warning, Overload warning, Short circuit warning.

Output Management: Press AC button to toggle AC outlets; Press DC button to toggle DC/USB outputs. LED Light: Single press for low brightness, double press for high, triple press for SOS mode, long press to turn off.

Connecting Devices

AC Devices: Laptops, small appliances (≤150W). DC Devices: Car refrigerators, portable fans. USB Devices: Phones, tablets, cameras.

Check device power requirements (do not exceed 150W total for AC).
Connect device cable to appropriate port.
Press corresponding output button (AC or DC) to activate power.
Monitor LCD for power draw and battery level.

Tip: For sensitive electronics, use pure sine wave AC output for clean power.

Charging & Power Management

Supports multiple charging methods: AC wall outlet, solar panel, car charger.

AC Charging: Use included adapter (full charge in 5-6 hours).
Solar Charging: Connect compatible solar panel (11-28V, 5A max).
Car Charging: Use 12V car charger cable while driving.
Battery Saving: Unit automatically enters sleep mode after 5 minutes of no load.
Fast Charging: USB-C PD port supports 60W input for compatible devices.

WARNING! Use only recommended charging accessories. Do not charge in extreme temperatures.

Safety Features

Overload Protection: Automatically shuts off output if exceeded. Short Circuit Protection: Cuts power during short circuit. Temperature Control: Fan activates during high temperature. Low Voltage Protection: Shuts down when battery reaches critical level (10%). Battery Management System (BMS): Monitors cell voltage and temperature.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only. Charge every 3 months if storing long-term.

CAUTION! Do not expose to water or extreme temperatures. Do not attempt to repair or modify internal components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Msw Power Solutions; trademarks of Msw Technologies, Inc. For support, visit www.mswpower.com or contact 1-800-555-2837.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Connect to power source and charge for 30 minutes before use.
No output power	Output not activated	Press AC or DC button to activate corresponding outputs.
Device turns off suddenly	Overload protection	Disconnect some devices; ensure total load ≤ 150W (AC) or 10A (DC).
Slow charging	Low input power	Use recommended charger; ensure solar panel receives adequate sunlight.
LCD display blank	Sleep mode	Press any button to wake display; check battery level.
Fan runs continuously	High temperature	Move unit to cooler location; reduce load; ensure ventilation ports clear.

Reset: Disconnect all devices, turn unit off, wait 1 minute, then restart.

Service: 1-800-555-2837; www.mswpower.com/support