Mizco International SOLAR LED10 User Manual

The Mizco International SOLAR LED10 is a solar-powered LED light designed for outdoor use, featuring a built-in solar panel, rechargeable battery, automatic dusk-to-dawn operation, multiple lighting modes, weather-resistant construction, and energy-efficient LED technology. Ideal for gardens, pathways, patios, and security lighting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Solar panel, LED light array, Rechargeable battery, Light sensor, Mode selector, Mounting hardware.

Feature	Description
Solar Panel	Converts sunlight to electrical energy for charging
LED Light Array	High-efficiency LEDs for bright, long-lasting illumination
Rechargeable Battery	Stores solar energy for nighttime operation
Light Sensor	Automatically turns light on at dusk and off at dawn
Mode Selector	Switches between different lighting modes (Constant, Motion, Dim)
Mounting Hardware	Includes stakes and brackets for ground or wall installation
Weather Resistance	IP65 rated for protection against dust and water jets
Charging Indicator	LED shows charging status
Motion Sensor	Detects movement in selected modes (range up to 10 feet)
Power Switch	Manual on/off override control

Installation

Unpack and inspect contents. Choose optimal location for solar exposure.

Select location: Place in area with direct sunlight for at least 6-8 hours daily.
Ground installation: Insert stake into ground; attach light unit securely.
Wall installation: Use mounting bracket and screws provided; ensure firm attachment.
Position solar panel: Angle toward south (northern hemisphere) for maximum sun exposure.

WARNING! Do not install near flammable materials. Ensure mounting surface is stable.

First-Time Setup

Before first use, fully charge the battery.

Initial charge: Place in direct sunlight for 8-12 hours with power switch OFF.
Check indicator: Charging LED should illuminate (usually red/green).
Set mode: Use mode selector to choose desired lighting operation.
Test operation: Cover light sensor to simulate darkness; light should turn on.

CAUTION! Do not expose to extreme temperatures during initial charge.

Specifications

Light Source: 10 High-Efficiency LEDs.
Solar Panel: 2V/100mA Monocrystalline.
Battery: 1.2V/600mAh Ni-MH Rechargeable.
Light Output: 20 Lumens.
Operating Time: 8-12 hours after full charge.
Charging Time: 6-8 hours in direct sunlight.
Sensor Range: Motion detection up to 10 feet.
Weather Resistance: IP65 (Dust tight, protected against water jets).
Operating Temperature: -4°F to 122°F (-20°C to 50°C).
Dimensions: 7.5" x 4.5" x 2.5".

Controls and Settings

Access controls via physical switches and sensors on the unit.

Power Switch: Three positions - OFF, AUTO (sensor-controlled), ON (constant).

Mode Selector: Switch between: - Constant Mode: Light remains on throughout the night. - Motion Mode: Light activates only when motion is detected. - Dim Mode: Light remains at 30% brightness, brightens to 100% with motion.

Sensitivity Adjustment: Adjust motion sensor range via dial (if equipped).

Timer Settings: Some models include adjustable duration (30s, 1min, 5min) for motion-activated light.

Connecting Devices

The SOLAR LED10 is a standalone unit; no external connections required for basic operation.

Optional daisy-chaining: Some models allow connection of additional lights (check if equipped).
Remote control: Compatible with optional wireless remote (sold separately).
Smart home integration: Not supported; standalone operation only.

Tip: For optimal performance, ensure no shadows cover solar panel during daylight.

Operating Modes

Three primary operating modes available.

AUTO Mode: Light turns on automatically at dusk, off at dawn. Uses light sensor.
Motion Sensor Mode: Activates only when motion detected within range. Returns to standby after preset time.
Constant On Mode: Light remains illuminated continuously until battery depletes or manually turned off.
Test Mode: Cover solar panel/light sensor to immediately activate light for testing.

WARNING! Do not stare directly at LEDs. Keep away from children's reach.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean solar panel weekly with soft, damp cloth to remove dust and debris.
Check mounting monthly for stability and reposition if shading occurs.
Battery replacement: After 1-2 years, battery may need replacement (use compatible Ni-MH).
Winter care: In snowy conditions, clear snow from solar panel regularly.

Care & Cleaning

Turn switch OFF before cleaning. Use only mild soap and water on exterior surfaces.

CAUTION! Do not use abrasive cleaners or solvents. Never submerge in water despite IP65 rating.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Mizco International; all rights reserved. Contains rechargeable battery; dispose of properly according to local regulations. For support, visit www.mizco.com or contact 1-800-266-4926.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light not turning on	Battery depleted	Ensure solar panel receives direct sunlight for 8+ hours; check power switch position.
Dim light output	Dirty solar panel	Clean solar panel surface; check for shading.
Short operating time	Weak battery	Replace rechargeable battery if over 2 years old.
Motion sensor not working	Obstructions/settings	Clear area in front of sensor; adjust sensitivity dial; check mode setting.
Light stays on during day	Faulty light sensor	Clean sensor window; reset unit by turning OFF for 24 hours.
Water inside unit	Seal compromised	Check and replace rubber seals; ensure all covers are properly closed.

Reset: Turn switch OFF for 24 hours, then back to AUTO for factory reset.

Service: 1-800-266-4926; www.mizco.com