Matson MA1101 Manual

The Matson MA1101 is a versatile digital audio amplifier with multi-channel output, built-in DSP processing, Bluetooth connectivity, multiple analog and digital inputs, remote control capability, and comprehensive protection circuits. Designed for professional and home audio applications, it features adjustable crossover networks, tone controls, and thermal/overload protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Multi-channel amplifier module, DSP processor, Bluetooth module, Remote Control, Input connectors, Speaker terminals, Cooling fan.

Feature	Description
Bluetooth connectivity	For wireless audio streaming from compatible devices
DSP processor	Digital signal processing for audio optimization
Multi-channel output	Supports 5.1 channel surround sound configuration
Optical/Coaxial input	For digital audio connection
RCA analog inputs	For traditional audio sources
Speaker terminals	Spring-loaded connectors for speaker wires
POWER button	Turns amplifier on/off
VOLUME knob	Adjusts master volume level
INPUT selector	Switches between audio sources
MODE button	Selects audio processing modes

Installation

Unpack and inspect contents. Place on well-ventilated surface.

1. Connect speakers: Match positive/negative terminals to speaker wires.
2. Connect audio sources: Use RCA cables for analog sources; optical/coaxial for digital.
3. Connect Bluetooth antenna: Attach to designated port for wireless connectivity.
4. Plug into AC power using included power cord.

WARNING! Ensure proper ventilation; do not block cooling vents. Use appropriate gauge speaker wire.

First-Time Setup

Power on amplifier; follow initialization sequence.

1. Initial power-up: Press POWER button; wait for startup sequence to complete.
2. Source selection: Use INPUT selector to choose desired audio source.
3. Volume adjustment: Set VOLUME knob to minimum before playing audio.
4. DSP configuration: Access menu to set crossover points and equalization.

CAUTION! Keep away from moisture and heat sources. Ensure stable power supply.

Specifications

• Power Output: 100W x 5 channels (RMS).
• Total Harmonic Distortion: <0.05% at rated power.
• Frequency Response: 20Hz - 20kHz (±1dB).
• Inputs: Bluetooth, Optical, Coaxial, RCA analog (5 channels).
• Outputs: 5-channel speaker terminals, subwoofer pre-out.
• DSP Features: Crossover adjustment, EQ presets, time alignment.
• Bluetooth: Version 5.0 with A2DP profile support.
• Power Requirements: 110-240V AC, 50/60Hz.
• Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via front panel buttons or remote control. Front Panel: POWER, VOLUME, INPUT, MODE, MENU.

Remote: POWER, Numeric buttons, INPUT selection, VOLUME up/down, MUTE, MENU, Navigation arrows, ENTER.

Audio Settings: Bass, Treble, Balance, Fader, Loudness. DSP Settings: Crossover frequencies (HPF/LPF), Slope settings, EQ presets (FLAT, ROCK, JAZZ, CLASSICAL). System Settings: Bluetooth pairing, Factory reset, Firmware version. Protection: Thermal shutdown, Overload protection, Short circuit protection.

Connecting Devices

Analog sources: RCA cables to corresponding inputs. Digital sources: Optical/coaxial cables. Speakers: Proper polarity to terminals.

1. Turn off amplifier before making connections.
2. Match cable types to appropriate ports.
3. Secure all connections firmly.
4. Select corresponding input via INPUT selector.

Tip: Use high-quality cables for best audio performance. Keep cables away from power cords.

Bluetooth Pairing

Supports wireless streaming from smartphones, tablets, and computers.

1. Enable pairing mode: Press and hold BT button for 3 seconds until LED flashes.
2. Search on device: On your Bluetooth device, search for "MA1101".
3. Connect: Select "MA1101" from available devices list.
4. Confirmation: LED stops flashing and remains solid when paired.
5. Play audio: Stream audio from connected device.

WARNING! Keep within 10 meter range for stable connection. Avoid obstacles between devices.

DSP Configuration

Digital Signal Processor settings for optimal audio performance.

1. Access DSP menu: Press MENU, navigate to DSP SETTINGS.
2. Crossover setup: Set high-pass and low-pass frequencies for each channel.
3. EQ adjustment: Select preset or create custom equalization curve.
4. Time alignment: Adjust delays for speaker distance compensation.
5. Save settings: Press ENTER to save configuration to memory.

Note: Default settings optimized for typical room acoustics.

Care & Maintenance

Unplug from power before cleaning. Use soft, dry cloth for exterior. Compressed air for vents.

CAUTION! Do not use liquid cleaners. Ensure unit is completely dry before powering on.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. RoHS compliant. Copyright © 2025 Matson Audio Systems; all rights reserved. For technical support, visit www.matsonaudio.com or contact 1-800-555-1101.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; ensure POWER button pressed.
No sound from speakers	Connections/volume	Verify speaker connections; check volume level; ensure correct input selected.
Bluetooth not connecting	Range/pairing mode	Move devices closer; ensure pairing mode active; restart both devices.
Overheating	Ventilation/load	Ensure adequate ventilation; reduce volume level; check impedance matching.
Distorted audio	Source quality/connections	Check source device; inspect cables for damage; verify proper connections.

Reset: Menu > System > Factory Reset to restore default settings.

Service: 1-800-555-1101; www.matsonaudio.com/support